Lubrication analysis for the piston ring of a two-stroke marine diesel engine taking account of the oil supply

2019 ◽  
pp. 146808741987211 ◽  
Author(s):  
Tongyang Li ◽  
Xuan Ma ◽  
Xiqun Lu ◽  
Chuanjuan Wang ◽  
Bowen Jiao ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Piston Ring ◽  
Lubricating Oil ◽  
Design Parameters ◽  
Bench Test ◽  
Marine Diesel Engine ◽  
Oil Film ◽  
Oil Supply ◽  
Marine Diesel ◽  
The Impact

The piston ring is one of the most important parts of a two-stroke marine diesel engine. It is lubricated by a special mode in which the lubricating oil is directly injected into the liner’s inner surface. In this article, taking account of the oil supply, a piston ring lubrication model is developed based on oil mass conservation. The lubrication region of this piston ring–cylinder liner is divided into inlet, core lubrication, and outlet regions, with the oil supply being converted into an oil film. The impact of the width of the core lubrication region on squeezing of the oil is considered. To verify the model, friction force measurements are performed in a reciprocating bench test under fully flooded conditions, and the model is further validated by comparing the minimum oil film thickness with data from the literature. The model is applied to the top ring of a two-stroke marine diesel engine, and the impacts of the oil supply and its design parameters are analyzed.

Full Shafting-Based Elastohydrodynamic Lubrication Simulation for Main Bearings of Marine Diesel Engine

2012 ◽  
Vol 479-481 ◽  
pp. 1119-1123 ◽  
Author(s):  
Hui Xing ◽  
Hui Zhang ◽  
Qili Wu ◽  
Shu Lin Duan
Keyword(s):  
Diesel Engine ◽  
Marine Diesel Engine ◽  
Main Bearing ◽  
Film Pressure ◽  
Oil Film ◽  
Marine Diesel ◽  
Simulation Results ◽  
Lubrication Characteristics ◽  
The Impact ◽  
Oil Film Pressure

To predict and analyze accurately the lubrication characteristics and its influencing factors of main bearing for large low-speed two-stroke marine diesel engine, based on EHD lubrication model of dynamically loaded bearing, coupling simulation between EHD and MBD for main bearing of marine diesel engine was carried out. Systemic models were established separately considering the independent crankshaft of diesel engine and the full shafting of propulsion power plant. Main bearing load, peak oil film pressure, oil film pressure distribution, MOFT and orbital path in one working cycle under rated working conditions were investigated, and simulation results were compared based on both models. The results show that, if the impact of full shafting was considered, the lubrication characteristics of No.8 main bearing changed significantly, the lubrication characteristics of other main bearings were similar as the simulation results of the independent crankshaft model.

Stress Distribution Analysis on Alloy Layer of High Power Marine Diesel Engine Bearing Bush

2013 ◽  
Vol 331 ◽  
pp. 148-152
Author(s):  
Xiu Xu Zhao ◽  
Zhi Xiang Hu ◽  
An Jian Huang
Keyword(s):  
Diesel Engine ◽  
High Power ◽  
Alloy Layer ◽  
Marine Diesel Engine ◽  
Oil Film ◽  
Marine Diesel ◽  
Bearing Alloy ◽  
Stress And Strain Distribution ◽  
Engine Bearing ◽  
Oil Film Pressure

According to the characteristics of large size, small clearance ratio, high oil film pressure and thin oil film thickness in the actual conditions of high power marine diesel engine bearing, this Paper analyzes oil film pressure distribution on inner surface of bearing bush based on the finite difference method, uses finite element method to establish the hierarchical model, and analyzes stress and strain distribution on bearing alloy. In addition, this Paper researches the changes of stress and strain distribution on bearing alloy layer when alloy layer thickness changes for the optimization design of high power marine diesel engine bearing bush.

A Study on Exhaust Gas Emission Control Technology of Marine Diesel Engine

2013 ◽  
Vol 864-867 ◽  
pp. 1804-1809 ◽  
Author(s):  
Song Zhou ◽  
Yan Liu ◽  
Jin Xi Zhou
Keyword(s):  
Diesel Engine ◽  
Research Direction ◽  
Marine Diesel Engine ◽  
Engine Emissions ◽  
Engine Exhaust ◽  
Exhaust Gas Emission ◽  
Particulate Matter Emissions ◽  
Marine Diesel ◽  
The Impact ◽  
Technical Measures

This paper introduces the impact on the marine environment caused by marine diesel engine exhaust pollution and the regulations made by IMO to control the marine diesel engine emissions. And it summarizes the main technical measures to reduce SOx, NOx and particulate matter emissions from the marine diesel. It also points that the combination application of various technologies will be the research direction to reduce the emission of marine diesel engine in the future.

Sign in / Sign up

Export Citation Format

Share Document