Practical applications of uniqueness theorems in gravimetry: Part II—Pragmatic incorporation of concrete geologic information

Geophysics ◽  
2002 ◽  
Vol 67 (3) ◽  
pp. 795-800 ◽  
Author(s):  
Valéria C. F. Barbosa ◽  
João B. C. Silva ◽  
Walter E. Medeiros
Keyword(s):  
Gravity Data ◽  
A Priori ◽  
Gravity Inversion ◽  
Solution Stability ◽  
Practical Applications ◽  
Density Distributions ◽  
Alternative Method ◽  
True Source ◽  
Priori Information ◽  
Simply Connected

We illustrate the importance of establishing solution uniqueness through mathematical restrictions reflecting a source attribute. We also illustrate the validity and utility of a guideline derived in an accompanying paper for constructing sound gravity inversion methods for the class of sources presenting either homogeneous or depth‐independent density distributions. The two‐part guideline is (1) to introduce a priori information favoring uniqueness, either by assuming that a nonnull density distribution depending only on x and y is confined to the interior of a horizontal slab with known position or by limiting the class of possible solutions to homogeneous, simply connected polygons (or polyhedra) with known density, displaying no fancy shapes and no curling apophyses at their borders, and (2) to introduce information favoring solution stability by estimating only the features of the source which may be resolved by the data. Following the guideline, we apply different methods to gravity data using interpretation models consisting of a grid of cells on the x‐y and x‐z planes. In both cases the estimates are very close to the true synthetic source. The data produced by the distribution varying with x and z are also inverted using the method, which minimizes the norm of the first‐order derivative of the density. This constraint does not reflect a true source attribute but is strong enough to stabilize the solution and to guarantee its uniqueness. Because of the strong bias imposed to the solution, the estimated distribution, although unique and stable, is far from the true source, concentrating most of the anomalous mass at the surface. Finally, we present an alternative method which redistributes the estimated anomalous mass downward. To be effective, this technique requires prior knowledge about the source depth to the top. In addition, the source should not be too small and deep. Although being able to produce good results, this alternative method requires a great dose of the interpreter's art.

Three‐dimensional gravity inversion using simulated annealing: Constraints on the diapiric roots of allochthonous salt structures

Geophysics ◽  
2001 ◽  
Vol 66 (5) ◽  
pp. 1438-1449 ◽  
Author(s):  
Seiichi Nagihara ◽  
Stuart A. Hall
Keyword(s):  
Simulated Annealing ◽  
Gulf Of Mexico ◽  
Gravity Data ◽  
A Priori ◽  
Gravity Inversion ◽  
Inversion Method ◽  
A Priori Information ◽  
Final Density ◽  
Smoothing Effects ◽  
Priori Information

In the northern continental slope of the Gulf of Mexico, large oil and gas reservoirs are often found beneath sheetlike, allochthonous salt structures that are laterally extensive. Some of these salt structures retain their diapiric feeders or roots beneath them. These hidden roots are difficult to image seismically. In this study, we develop a method to locate and constrain the geometry of such roots through 3‐D inverse modeling of the gravity anomalies observed over the salt structures. This inversion method utilizes a priori information such as the upper surface topography of the salt, which can be delineated by a limited coverage of 2‐D seismic data; the sediment compaction curve in the region; and the continuity of the salt body. The inversion computation is based on the simulated annealing (SA) global optimization algorithm. The SA‐based gravity inversion has some advantages over the approach based on damped least‐squares inversion. It is computationally efficient, can solve underdetermined inverse problems, can more easily implement complex a priori information, and does not introduce smoothing effects in the final density structure model. We test this inversion method using synthetic gravity data for a type of salt geometry that is common among the allochthonous salt structures in the Gulf of Mexico and show that it is highly effective in constraining the diapiric root. We also show that carrying out multiple inversion runs helps reduce the uncertainty in the final density model.

Isostatic constraint for 2D nonlinear gravity inversion on rifted margins

Geophysics ◽  
2019 ◽  
Vol 85 (1) ◽  
pp. G17-G34
Author(s):  
B. Marcela S. Bastos ◽  
Vanderlei C. Oliveira Jr.
Keyword(s):  
Gravity Data ◽  
A Priori ◽  
Petroleum Industry ◽  
Synthetic Data ◽  
Gravity Inversion ◽  
Rifted Margins ◽  
Isostatic Equilibrium ◽  
Priori Information ◽  
Pelotas Basin ◽  
Nonlinear Gravity

We have developed a nonlinear gravity inversion for simultaneously estimating the basement and Moho geometries, as well as the depth of the reference Moho along a profile crossing a passive rifted margin. To obtain stable solutions, we impose smoothness on basement and Moho, force them to be close to previously estimated depths along the profile and also impose local isostatic equilibrium. Different from previous methods, we evaluate the information of local isostatic equilibrium by imposing smoothness on the lithostatic stress exerted at depth. Our method delimits regions that deviate and those that can be considered in local isostatic equilibrium by varying the weight of the isostatic constraint along the profile. It also allows controlling the degree of equilibrium along the profile, so that the interpreter can obtain a set of candidate models that fit the observed data and exhibit different degrees of isostatic equilibrium. Our method also differs from earlier studies because it attempts to use isostasy for exploring (but not necessarily reducing) the inherent ambiguity of gravity methods. Tests with synthetic data illustrate the effect of our isostatic constraint on the estimated basement and Moho reliefs, especially at regions with pronounced crustal thinning, which are typical of passive volcanic margins. Results obtained by inverting satellite data over the Pelotas Basin, a passive volcanic margin in southern Brazil, agree with previous interpretations obtained independently by combining gravity, magnetic, and seismic data available to the petroleum industry. These results indicate that combined with a priori information, simple isostatic assumptions can be very useful for interpreting gravity data on passive rifted margins.

Practical applications of uniqueness theorems in gravimetry: Part I—Constructing sound interpretation methods

Geophysics ◽  
2002 ◽  
Vol 67 (3) ◽  
pp. 788-794 ◽  
Author(s):  
João B. C. Silva ◽  
Walter E. Medeiros ◽  
Valéria C. F. Barbosa
Keyword(s):  
Inverse Problem ◽  
A Priori ◽  
Stable Solution ◽  
Gravity Inversion ◽  
Uniqueness Theorems ◽  
A Priori Information ◽  
Practical Applications ◽  
Inversion Methods ◽  
Geological Information ◽  
Priori Information

To obtain a unique and stable solution to the gravity inverse problem, a priori information reflecting geological attributes of the gravity source must be used. Mathematical conditions to obtain stable solutions are established in Tikhonov's regularization method, where the a priori information is introduced via a stabilizing functional, which may be suitably designed to incorporate some relevant geological information. However, there is no unifying approach establishing general uniqueness conditions for a gravity inverse problem. Rather, there are many theorems, usually establishing just abstract mathematical conditions and making it difficult to devise the type of geological information needed to guarantee a unique solution. In Part I of these companion papers, we show that translating the mathematical uniqueness conditions into geological constraints is an important step not only in establishing the type of geological setting where a particular method may be applied but also in designing new gravity inversion methods. As an example, we analyze three uniqueness theorems in gravimetry restricted to the class of homogeneous bodies with known density and show that the uniqueness conditions established by them are more probably met if the solution is constrained to be a compact body without curled protrusions at their borders. These conditions, together with stabilizing conditions (assuming a simple shape for the source), form a guideline to construct sound gravity inversion methods. A historical review of the gravity interpretation methods shows that several methods implicitly follow this guideline. In Part II we use synthetic examples to illustrate the theoretical results derived in Part I. We also illustrate that the presented guideline is not the only way to design sound inversion methods for the class of homogeneous bodies. We present an alternative approach which produces good results but whose design requires a good dose of the interpreter's art.

Generalized compact gravity inversion

Geophysics ◽  
1994 ◽  
Vol 59 (1) ◽  
pp. 57-68 ◽  
Author(s):  
Valeria Cristina F. Barbosa ◽  
João B. C. Silva
Keyword(s):  
Body Shape ◽  
Sedimentary Basin ◽  
A Priori ◽  
Gravity Inversion ◽  
A Priori Information ◽  
Magnetite Ore ◽  
Inversion Technique ◽  
True Value ◽  
Ore Body ◽  
Priori Information

Extending the compact gravity inversion technique by incorporating a priori information about the maximum compactness of the anomalous sources along several axes provides versatility. Thus, the method may also incorporate information about limits in the axes lengths or greater concentration of mass along one or more directions. The judicious combination of different constraints on the anomalous mass distribution allows the introduction of several kinds of a priori information about the (arbitrary) shape of the sources. This method is particularly applicable to constant, linear density sources such as mineralizations along faults and intruded sills, dikes, and laccoliths in a sedimentary basin. The correct source density must be known with a maximum uncertainty of 40 percent; otherwise, the inversion produces thicker bodies for densities smaller than the true value and vice‐versa. Because of the limitations of the inverse gravity problem, the proposed technique requires an empirical technique to analyze the sensitivity of solutions to uncertainties in the a priori information. The proposed technique is based on a finite number of acceptable solutions, presumably representative of the ambiguity region. By using standard statistical techniques, each parameter is assigned a coefficient measuring its uncertainty. The known hematite and magnetite ore body shape, in the vicinity of Iron Mountain, MO, was reproduced quite well using this inversion technique.

An attempt to formulate well‐posed questions in gravity: Application of linear inverse techniques to mining exploration

Geophysics ◽  
1984 ◽  
Vol 49 (10) ◽  
pp. 1781-1793 ◽  
Author(s):  
Vincent Richard ◽  
Roger Bayer ◽  
Michel Cuer
Keyword(s):  
Linear Programming ◽  
Gravity Data ◽  
A Priori ◽  
Massive Sulfide ◽  
Sulfide Deposit ◽  
Exploration Process ◽  
Programming Techniques ◽  
Priori Information ◽  
Mining Exploration ◽  
Well Posed

The aim of this paper is to use linear inverse theory to interpret gravity surveys in mining exploration by incorporating a priori information on the densities and data in terms of Gaussian or uniform probability laws. The Bayesian approach and linear programming techniques lead to the solution of well‐posed questions resulting from the exploration process. In particular, we develop a method of measuring the possible heterogeneity within a given domain by using linear programming. These techniques are applied to gravity data taken over the massive sulfide deposit of Neves Corvo (Portugal). We show how crude constraints on the densities lead to a first estimation of the location of sources, while further geologic constraints allow us to estimate the heterogeneity and to put definite bounds on the ore masses.

Inversion of inductive electromagnetic data in highly conductive terrains

Geophysics ◽  
2005 ◽  
Vol 70 (1) ◽  
pp. G16-G28 ◽  
Author(s):  
G. Schultz ◽  
C. Ruppel
Keyword(s):  
A Priori ◽  
Two Dimensions ◽  
Forward Model ◽  
Practical Applications ◽  
Shallow Subsurface ◽  
Subsurface Structures ◽  
Conductivity Structure ◽  
Actual Field ◽  
Priori Information ◽  
The Stability

Despite the increasing use of controlled-source frequency-domain EM data to characterize shallow subsurface structures, relatively few inversion algorithms have been widely applied to data from real-world settings, particularly in high-conductivity terrains. In this study, we develop robust and convergent regularized, least-squares inversion algorithms based on both linear and nonlinear formulations of mutual dipole induction for the forward problem. A modified version of the discrepancy principle based on a priori information is implemented to select optimal smoothing parameters that simultaneously guarantee the stability and best-fit criteria. To investigate the problems of resolution and equivalence, we consider typical layered-earth models in one and two dimensions using both synthetic and observed data. Synthetic examples show that inversions based on the nonlinear forward model more accurately resolve subsurface structure, and that inversions based on the linear forward model tend to drastically underpredict high conductivities at depth. Inversions of actual field data from well-characterized sites (e.g., National Geotechnical Experimentation Site; sand-dominated coastal aquifer in the Georgia Bight) are used to test the applicability of the model to terrains with different characteristic conductivity structure. A comparison of our inversion results with existing cone-penetrometer and downhole-conductivity data from these field sites demonstrates the ability of the inversions to constrain conductivity variations in practical applications.

Mapping and depth ordering of residual gravity sources

Geophysics ◽  
1993 ◽  
Vol 58 (10) ◽  
pp. 1408-1416 ◽  
Author(s):  
Jacira F. Beltrão ◽  
João B. C. Silva
Keyword(s):  
Apparent Density ◽  
A Priori ◽  
Depth Interval ◽  
Constant Density ◽  
Vertical Coordinate ◽  
Density Distributions ◽  
Families Of Curves ◽  
Density Maps ◽  
Family Of Curves ◽  
Priori Information

Apparent density maps are derived from observed residual Bouguer maps under the assumptions that the sources are restricted to a depth interval and that the density distribution is not a function of the vertical coordinate. If the depth interval containing the sources is known, the computed apparent density maps are very close to the true density distributions. Even when the depth interval of the sources is not known, but the sources have constant density, their horizontal extent may be delineated by the half‐maximum contours of the apparent densities. We developed an interpretation method using a family of curves based on source density, depth to top of sources, and source thickness. The main advantage in the use of these families of curves is the broad range of possible interpretations involving the above‐mentioned parameters. Rough semiquantitative interpretations are possible in the absence of any further a priori information; more refined semiquantitative interpretations require additional quantitative knowledge of one parameter and just a lower or upper bound for another parameter. Finally, quantitative interpretations are possible only with additional quantitative knowledge of two of the three parameters involved.

scholarly journals Seismic Constrained Gravity Inversion: A Reliable Tool to Improve Geophysical Models Away from Seismic Information

Geosciences ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 467
Author(s):  
Daniele Sampietro ◽  
Martina Capponi
Keyword(s):  
High Resolution ◽  
Gravity Field ◽  
A Priori ◽  
Geophysical Methods ◽  
Real Life ◽  
Gravity Inversion ◽  
Seismic Surveys ◽  
Real Model ◽  
Gravity Fields ◽  
Priori Information

The exploitation of gravity fields in order to retrieve information about subsurface geological structures is sometimes considered a second rank method, in favour of other geophysical methods, such as seismic, able to provide a high resolution detailed picture of the main geological horizons. Within the current work we prove, through a realistic synthetic case study, that the gravity field, thanks to the availability of freely of charge high resolution global models and to the improvements in the gravity inversion methods, can represent a valid and cheap tool to complete and enhance geophysical modelling of the Earth’s crust. Three tests were carried out: In the first one a simple two-layer problem was considered, while in tests two and three we considered two more realistic scenarios in which the availability on the study area of constraints derived from 3D or 2D seismic surveys were simulated. In all the considered test cases, in which we try to simulate real-life scenarios, the gravity field, inverted by means of an advanced Bayesian technique, was able to obtain a final solution closer to the (simulated) real model than the assumed a priori information, typically halving the uncertainties in the geometries of the main geological horizons with respect to the initial model.

scholarly journals SIMULATION MODELLING IN THE STRUCTURAL GRAVITY PROSPECTING

2019 ◽  
pp. 38-48
Author(s):  
S. H. Anikeyev ◽  
S. M. Bahriy ◽  
B. B. Hablovskiy
Keyword(s):  
Cross Sections ◽  
Gravity Data ◽  
A Priori ◽  
Structural Type ◽  
Simulation Modelling ◽  
Gravity Modeling ◽  
Gravity Inversion ◽  
Density Structure ◽  
Data Modelling ◽  
Computer Technologies

In accordance with the purpose of geophysical exploration, the gravity data interpretation is aimed at prospecting mineral resources which is based on the study of the geological cross-section structure. The task of quantitative interpretation, which uses methods of gravity modeling and gravity inversion, is the modelling of a gravity field (gravity modeling) and of a density structure of geological environments (gravity inversion). The article presents the definition and steps of the gravity data modelling technique. This technique is based on the construction of an informal sequence of equivalent solutions. The technological and geological features of methods for modelling the density structure of complex geological environments are given; among them geological content, consistency with a priori data and the subordination of modelling to geological hypotheses are important. The topicality and methods of simulation modelling are outlined. The purpose of simulation modelling is to study the properties of gravity inversion in the general formulation, as well as to evaluate the degree of detail and reliability of the methods and technologies of gravity modelling, which claim to be an effective solution to geological problems. The example of structural simulation testing of the methods of informal sequence of equivalent solutions and its computer technologies shows that a complex interpretation of seismic and gravity measurements data enables the creation of detailed density models of structural cross-sections. The ways of increasing the veracity of gravity data modelling of structural cross-sections have been studied. It is revealed that the best approximation of the regional background is an inclined plane which approximates the observed field of gravity according to characteristic pickets over the research areas that are better studied. The increase in the veracity of modeling can also be achieved by rebuilding the near side zones in the structural type models in an interactive process of solving structural gravity inversion problems. Substantive modeling depends primarily on the experience of the interpreter since computer technologies for gravity modeling and gravity inversion are merely an interpretation tool.

Sign in / Sign up

Export Citation Format

Share Document