Least-squares Gaussian beam migration

Geophysics ◽  
2016 ◽  
Vol 81 (3) ◽  
pp. S87-S100 ◽  
Author(s):  
Hao Hu ◽  
Yike Liu ◽  
Yingcai Zheng ◽  
Xuejian Liu ◽  
Huiyi Lu

Least-squares migration (LSM) can be effective to mitigate the limitation of finite-seismic acquisition, balance the subsurface illumination, and improve the spatial resolution of the image, but it requires iterations of migration and demigration to obtain the desired subsurface reflectivity model. The computational efficiency and accuracy of migration and demigration operators are crucial for applying the algorithm. We have developed a test of the feasibility of using the Gaussian beam as the wavefield extrapolating operator for the LSM, denoted as least-squares Gaussian beam migration. Our method combines the advantages of the LSM and the efficiency of the Gaussian beam propagator. Our numerical evaluations, including two synthetic data sets and one marine field data set, illustrate that the proposed approach could be used to obtain amplitude-balanced images and to broaden the bandwidth of the migrated images in particular for the low-wavenumber components.

Geophysics ◽  
2020 ◽  
Vol 85 (4) ◽  
pp. D133-D143
Author(s):  
David Li ◽  
Xiao Tian ◽  
Hao Hu ◽  
Xiao-Ming Tang ◽  
Xinding Fang ◽  
...  

The ability to image near-wellbore fractures is critical for wellbore integrity monitoring as well as for energy production and waste disposal. Single-well imaging uses a sonic logging instrument consisting of a source and a receiver array to image geologic structures around a wellbore. We use cross-dipole sources because they can excite waves that can be used to image structures farther away from the wellbore than traditional monopole sources. However, the cross-dipole source also will excite large-amplitude, slowly propagating dispersive waves along the surface of the borehole. These waves will interfere with the formation reflection events. We have adopted a new fracture imaging procedure using sonic data. We first remove the strong amplitude borehole waves using a new nonlinear signal comparison method. We then apply Gaussian beam migration to obtain high-resolution images of the fractures. To verify our method, we first test our method on synthetic data sets modeled using a finite-difference approach. We then validate our method on a field data set collected from a fractured natural gas production well. We are able to obtain high-quality images of the fractures using Gaussian beam migration compared with Kirchhoff migration for the synthetic and field data sets. We also found that a low-frequency source (around 1 kHz) is needed to obtain a sharp image of the fracture because high-frequency wavefields can interact strongly with the fluid-filled borehole.


Geophysics ◽  
2019 ◽  
Vol 84 (4) ◽  
pp. S329-S340 ◽  
Author(s):  
Yubo Yue ◽  
Paul Sava ◽  
Zhongping Qian ◽  
Jidong Yang ◽  
Zhen Zou

Gaussian beam migration (GBM) is an effective imaging method that has the ability to image multiple arrivals while preserving the advantages of ray-based methods. We have extended this method to linearized least-squares imaging for elastic waves in isotropic media. We have dynamically transformed the multicomponent data to the principal components of different wave modes using the polarization information available in the beam migration process, and then we use Gaussian beams as wavefield propagator to construct the forward modeling and adjoint migration operators. Based on the constructed operators, we formulate a least-squares migration scheme that is iteratively solved using a preconditioned conjugate gradient method. With this method, we can obtain crosstalk-attenuated multiwave images with better subsurface illumination and higher resolution than those of the conventional elastic Gaussian beam migration. This method also allows us to achieve a good balance between computational cost and imaging accuracy, which are both important requirements for iterative least-squares migrations. Numerical tests on two synthetic data sets demonstrate the validity and effectiveness of our proposed method.


Geophysics ◽  
2016 ◽  
Vol 81 (3) ◽  
pp. V213-V225 ◽  
Author(s):  
Shaohuan Zu ◽  
Hui Zhou ◽  
Yangkang Chen ◽  
Shan Qu ◽  
Xiaofeng Zou ◽  
...  

We have designed a periodically varying code that can avoid the problem of the local coherency and make the interference distribute uniformly in a given range; hence, it was better at suppressing incoherent interference (blending noise) and preserving coherent useful signals compared with a random dithering code. We have also devised a new form of the iterative method to remove interference generated from the simultaneous source acquisition. In each iteration, we have estimated the interference using the blending operator following the proposed formula and then subtracted the interference from the pseudodeblended data. To further eliminate the incoherent interference and constrain the inversion, the data were then transformed to an auxiliary sparse domain for applying a thresholding operator. During the iterations, the threshold was decreased from the largest value to zero following an exponential function. The exponentially decreasing threshold aimed to gradually pass the deblended data to a more acceptable model subspace. Two numerically blended synthetic data sets and one numerically blended practical field data set from an ocean bottom cable were used to demonstrate the usefulness of our proposed method and the better performance of the periodically varying code over the traditional random dithering code.


Geophysics ◽  
2019 ◽  
Vol 84 (4) ◽  
pp. R625-R640 ◽  
Author(s):  
Bowu Jiang ◽  
Jianfeng Zhang

We have developed an explicit inverse approach with a Hessian matrix for the least-squares (LS) implementation of prestack time migration (PSTM). A full Hessian matrix is divided into a series of computationally tractable small-sized matrices using a localized approach, thus significantly reducing the size of the inversion. The scheme is implemented by dividing the imaging volume into a series of subvolumes related to the blockwise Hessian matrices that govern the mapping relationship between the migrated result and corresponding reflectivity. The proposed blockwise LS-PSTM can be implemented in a target-oriented fashion. The localized approach that we use to modify the Hessian matrix can eliminate the boundary effects originating from the blockwise implementation. We derive the explicit formula of the offset-dependent Hessian matrix using the deconvolution imaging condition with an analytical Green’s function of PSTM. This avoids the challenging task of estimating the source wavelet. Moreover, migrated gathers can be generated with the proposed scheme. The smaller size of the blockwise Hessian matrix makes it possible to incorporate the total-variation regularization into the inversion, thus attenuating noises significantly. We revealed the proposed blockwise LS-PSTM with synthetic and field data sets. Higher quality common-reflection-point gathers of the field data are obtained.


Geophysics ◽  
2020 ◽  
Vol 86 (1) ◽  
pp. S17-S28
Author(s):  
Yubo Yue ◽  
Yujin Liu ◽  
Yaonan Li ◽  
Yunyan Shi

Because of amplitude decay and phase dispersion of seismic waves, conventional migrations are insufficient to produce satisfactory images using data observed in highly attenuative geologic environments. We have developed a least-squares Gaussian beam migration method for viscoacoustic data imaging, which can not only compensate for amplitude decay and phase dispersion caused by attenuation, but it can also improve image resolution and amplitude fidelity through linearized least-squares inversion. We represent the viscoacoustic Green’s function by a summation of Gaussian beams, in which an attenuation traveltime is incorporated to simulate or compensate for attenuation effects. Based on the beam representation of the Green’s function, we construct the viscoacoustic Born forward modeling and adjoint migration operators, which can be effectively evaluated by a time-domain approach based on a filter-bank technique. With the constructed operators, we formulate a least-squares migration scheme to iteratively solve for the optimal image. Numerical tests on synthetic and field data sets demonstrate that our method can effectively compensate for the attenuation effects and produce images with higher resolution and more balanced amplitudes than images from acoustic least-squares Gaussian beam migration.


2020 ◽  
Vol 633 ◽  
pp. A46
Author(s):  
L. Siltala ◽  
M. Granvik

Context. The bulk density of an asteroid informs us about its interior structure and composition. To constrain the bulk density, one needs an estimated mass of the asteroid. The mass is estimated by analyzing an asteroid’s gravitational interaction with another object, such as another asteroid during a close encounter. An estimate for the mass has typically been obtained with linearized least-squares methods, despite the fact that this family of methods is not able to properly describe non-Gaussian parameter distributions. In addition, the uncertainties reported for asteroid masses in the literature are sometimes inconsistent with each other and are suspected to be unrealistically low. Aims. We aim to present a Markov-chain Monte Carlo (MCMC) algorithm for the asteroid mass estimation problem based on asteroid-asteroid close encounters. We verify that our algorithm works correctly by applying it to synthetic data sets. We use astrometry available through the Minor Planet Center to estimate masses for a select few example cases and compare our results with results reported in the literature. Methods. Our mass-estimation method is based on the robust adaptive Metropolis algorithm that has been implemented into the OpenOrb asteroid orbit computation software. Our method has the built-in capability to analyze multiple perturbing asteroids and test asteroids simultaneously. Results. We find that our mass estimates for the synthetic data sets are fully consistent with the ground truth. The nominal masses for real example cases typically agree with the literature but tend to have greater uncertainties than what is reported in recent literature. Possible reasons for this include different astrometric data sets and weights, different test asteroids, different force models or different algorithms. For (16) Psyche, the target of NASA’s Psyche mission, our maximum likelihood mass is approximately 55% of what is reported in the literature. Such a low mass would imply that the bulk density is significantly lower than previously expected and thus disagrees with the theory of (16) Psyche being the metallic core of a protoplanet. We do, however, note that masses reported in recent literature remain within our 3-sigma limits. Results. The new MCMC mass-estimation algorithm performs as expected, but a rigorous comparison with results from a least-squares algorithm with the exact same data set remains to be done. The matters of uncertainties in comparison with other algorithms and correlations of observations also warrant further investigation.


2019 ◽  
Vol 17 (1) ◽  
pp. 148-159 ◽  
Author(s):  
Song Guo ◽  
Huazhong Wang

Abstract Assuming that an accurate background velocity is obtained, least-squares migration (LSM) can be used to estimate underground reflectivity. LSM can be implemented in either the data domain or image domain. The data domain LSM (DDLSM) is not very practical because of its huge computational cost and slow convergence rate. The image domain LSM (IDLSM) might be a flexible alternative if estimating the Hessian matrix using a cheap and accurate approach. It has practical potential to analyse convenient Hessian approximation methods because the Hessian matrix is too huge to compute and save. In this paper, the Hessian matrix is approximated with non-stationary matching filters. The filters are calculated to match the conventional migration image to the demigration/remigration image. The two images are linked by the Hessian matrix. An image deblurring problem is solved with the estimated filters for the IDLSM result. The combined sparse and total variation regularisations are used to produce accurate and reasonable inversion results. The numerical experiments based on part of Sigsbee model, Marmousi model and a 2D field data set illustrate that the non-stationary matching filters can give a good approximation for the Hessian matrix, and the results of the image deblurring problem with combined regularisations can provide high-resolution and true-amplitude reflectivity estimations.


Geophysics ◽  
2017 ◽  
Vol 82 (3) ◽  
pp. S197-S205 ◽  
Author(s):  
Zhaolun Liu ◽  
Abdullah AlTheyab ◽  
Sherif M. Hanafy ◽  
Gerard Schuster

We have developed a methodology for detecting the presence of near-surface heterogeneities by naturally migrating backscattered surface waves in controlled-source data. The near-surface heterogeneities must be located within a depth of approximately one-third the dominant wavelength [Formula: see text] of the strong surface-wave arrivals. This natural migration method does not require knowledge of the near-surface phase-velocity distribution because it uses the recorded data to approximate the Green’s functions for migration. Prior to migration, the backscattered data are separated from the original records, and the band-passed filtered data are migrated to give an estimate of the migration image at a depth of approximately one-third [Formula: see text]. Each band-passed data set gives a migration image at a different depth. Results with synthetic data and field data recorded over known faults validate the effectiveness of this method. Migrating the surface waves in recorded 2D and 3D data sets accurately reveals the locations of known faults. The limitation of this method is that it requires a dense array of receivers with a geophone interval less than approximately one-half [Formula: see text].


Geophysics ◽  
1999 ◽  
Vol 64 (1) ◽  
pp. 208-221 ◽  
Author(s):  
Tamas Nemeth ◽  
Chengjun Wu ◽  
Gerard T. Schuster

A least‐squares migration algorithm is presented that reduces the migration artifacts (i.e., recording footprint noise) arising from incomplete data. Instead of migrating data with the adjoint of the forward modeling operator, the normal equations are inverted by using a preconditioned linear conjugate gradient scheme that employs regularization. The modeling operator is constructed from an asymptotic acoustic integral equation, and its adjoint is the Kirchhoff migration operator. We tested the performance of the least‐squares migration on synthetic and field data in the cases of limited recording aperture, coarse sampling, and acquisition gaps in the data. Numerical results show that the least‐squares migrated sections are typically more focused than are the corresponding Kirchhoff migrated sections and their reflectivity frequency distributions are closer to those of the true model frequency distribution. Regularization helps attenuate migration artifacts and provides a sharper, better frequency distribution of estimated reflectivity. The least‐squares migrated sections can be used to predict the missing data traces and interpolate and extrapolate them according to the governing modeling equations. Several field data examples are presented. A ground‐penetrating radar data example demonstrates the suppression of the recording footprint noise due to a limited aperture, a large gap, and an undersampled receiver line. In addition, better fault resolution was achieved after applying least‐squares migration to a poststack marine data set. And a reverse vertical seismic profiling example shows that the recording footprint noise due to a coarse receiver interval can be suppressed by least‐squares migration.


Author(s):  
Mingpeng Song ◽  
Jianfeng Zhang ◽  
Jiangjie Zhang

Abstract We present an explicit inverse approach using a Hessian matrix for least-squares migration (LSM) with Q compensation. The scheme is developed by incorporating an effective Q-based solution of the viscoacoustic wave equation into a blockwise approximation to the Hessian in LSM, which is implemented after the so-called deabsorption prestack time migration (PSTM). The effective Q model used fully accounts for frequency-dependent traveltime and amplitude at the same imaging location. We can extract the effective Q parameters by scanning during previous deabsorption PSTM. This avoids the challenging task of building the Q model. The blockwise Hessian matrix approach decomposes the full Hessian matrix into a series of computationally tractable small-sized matrices using a localised approach. We derive the explicit formula of the offset-dependent Hessian matrix using an analytical Green's function obtained from deabsorption PSTM. In this way, we can approximate a reflectivity imaging for the targeted zone by a spatial deconvolution of the migrated result with an explicit inverse. The resulting scheme broadens the frequency-band of imaging by deabsorption, and improves the subsurface illumination and spatial resolution through the inverse Hessian. A high-resolution, true-amplitude migrated gather can then be obtained. Synthetic and field data sets demonstrate the proposed blockwise LS-QPSTM.


Sign in / Sign up

Export Citation Format

Share Document