An efficient super-virtual shot encoding scheme for multisource reverse time migration

Geophysics ◽  
2020 ◽  
Vol 85 (6) ◽  
pp. S405-S416
Author(s):  
Xiaofeng Jia ◽  
Wenyang Chen ◽  
Bin Chen
Keyword(s):  
Reverse Time ◽  
Crosstalk Noise ◽  
Reverse Time Migration ◽  
Multiple Sources ◽  
Source Imaging ◽  
Imaging Tool ◽  
Time Migration ◽  
Imaging Result ◽  
Imaging Results ◽  
Simultaneous Source

Reverse time migration (RTM) is a powerful seismic imaging tool that suffers from high computational complexity when dealing with massive data. The simultaneous-shot method can effectively reduce the amount of migration by assembling several sources, although it adds crosstalk noise, which seriously affects the quality of the RTM results. To avoid this problem, we have adopted a time-domain scheme that combines time-delay encoding and amplitude encoding to reduce crosstalk artifacts in simultaneous-source imaging results. This scheme modulates the wavefields of multiple sources to fit the wavefield of a suspended super-virtual shot (SVS), which can eliminate crosstalk artifacts because they are absent in single SVS migration. Numerical examples on a steeply dipping model and the 2D SEG/EAGE salt model show the feasibility of the proposed method. SVS encoding can generate a qualified imaging result and takes less time than plane-wave encoding in the migration process.

scholarly journals Seismic imaging of incomplete data and simultaneous-source data using least-squares reverse time migration with shaping regularization

Geophysics ◽  
2016 ◽  
Vol 81 (1) ◽  
pp. S11-S20 ◽  
Author(s):  
Zhiguang Xue ◽  
Yangkang Chen ◽  
Sergey Fomel ◽  
Junzhe Sun
Keyword(s):  
Least Squares ◽  
Incomplete Data ◽  
Gradient Algorithm ◽  
Reverse Time ◽  
Crosstalk Noise ◽  
Reverse Time Migration ◽  
Direct Imaging ◽  
Time Migration ◽  
Source Data ◽  
Simultaneous Source

Simultaneous-source acquisition improves the efficiency of the seismic data acquisition process. However, direct imaging of simultaneous-source data may introduce crosstalk artifacts in the final image. Likewise, direct imaging of incomplete data avoids the step of data reconstruction, but it can suffer from migration artifacts. We have proposed to incorporate shaping regularization into least-squares reverse time migration (LSRTM) and use it for suppressing interference noise caused by simultaneous-source data or migration artifacts caused by incomplete data. To implement LSRTM, we have applied lowrank one-step reverse time migration and its adjoint iteratively in the conjugate-gradient algorithm to minimize the data misfit. A shaping operator imposing structure constraints on the estimated model was applied at each iteration. We constructed the shaping operator as a structure-enhancing filtering to attenuate migration artifacts and crosstalk noise while preserving structural information. We have carried out numerical tests on synthetic models in which the proposed method exhibited a fast convergence rate and was effective in attenuating migration artifacts and crosstalk noise.

scholarly journals Phaseless Imaging by Reverse Time Migration: Acoustic Waves

2017 ◽  
Vol 10 (1) ◽  
pp. 1-21 ◽  
Author(s):  
Zhiming Chen ◽  
Guanghui Huang
Keyword(s):  
Acoustic Waves ◽  
Numerical Experiments ◽  
Cross Correlation ◽  
Scattering Data ◽  
Imaging Method ◽  
Total Field ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Imaging Results

AbstractWe propose a reliable direct imaging method based on the reverse time migration for finding extended obstacles with phaseless total field data. We prove that the imaging resolution of the method is essentially the same as the imaging results using the scattering data with full phase information when the measurement is far away from the obstacle. The imaginary part of the cross-correlation imaging functional always peaks on the boundary of the obstacle. Numerical experiments are included to illustrate the powerful imaging quality

An efficient local operator-based Q-compensated reverse time migration algorithm with multistage optimization

Geophysics ◽  
2018 ◽  
Vol 83 (3) ◽  
pp. S249-S259 ◽  
Author(s):  
Tong Zhou ◽  
Wenyi Hu ◽  
Jieyuan Ning
Keyword(s):  
Seismic Attenuation ◽  
Depth Information ◽  
Frequency Noise ◽  
Processing Unit ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Time Migration ◽  
Imaging Results

Most existing [Formula: see text]-compensated reverse time migration ([Formula: see text]-RTM) algorithms are based on pseudospectral methods. Because of the global nature of pseudospectral operators, these methods are not ideal for efficient parallelization, implying that they may suffer from high computational cost and inefficient memory usage for large-scale industrial problems. In this work, we reported a novel [Formula: see text]-RTM algorithm — the multistage optimized [Formula: see text]-RTM method. This [Formula: see text]-RTM algorithm uses a finite-difference method to compensate the amplitude and the phase simultaneously by uniquely combining two techniques: (1) a negative [Formula: see text] method for amplitude compensation and (2) a multistage dispersion optimization technique for phase correction. To prevent high-frequency noise from growing exponentially and ruining the imaging results, we apply a finite impulse response low-pass filter using the Kaiser window. The theoretical analyses and numerical experiments demonstrate that this [Formula: see text]-RTM algorithm precisely recovers the decayed amplitude and corrects the distorted phase caused by seismic attenuation effects, and hence produces higher resolution subsurface images with the correct structural depth information. This new method performs best in the frequency range of 10–70 Hz. Compared with pseudospectral [Formula: see text]-RTM methods, this [Formula: see text]-RTM approach offers nearly identical imaging quality. Based on local numerical differential operators, this [Formula: see text]-RTM method is very suitable for parallel computing and graphic processing unit implementation, an important feature for large 3D seismic surveys.

Near-Borehole Imaging Using Full-Waveform Sonic Data

2021 ◽  
Author(s):  
Hala Alqatari ◽  
Thierry-Laurent Tonellot ◽  
Mohammed Mubarak
Keyword(s):  
Seismic Data ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Full Waveform ◽  
Time Migration ◽  
Imaging Results ◽  
High Resolution Images ◽  
Recorded Data ◽  
The Impact ◽  
Processing Steps

Abstract This work presents a full waveform sonic (FWS) dataset processing to generate high-resolution images of the near-borehole area. The dataset was acquired in a nearly horizontal well over a distance of 5400 feet. Multiple formation boundaries can be identified on the final image and tracked at up to 200 feet deep, along the wellbore's trajectory. We first present a new preprocessing sequence to prepare the sonic data for imaging. This sequence leverages denoising algorithms used in conventional surface seismic data processing to remove unwanted components of the recorded data that could harm the imaging results. We then apply a reverse time migration algorithm to the data at different processing stages to assess the impact of the main processing steps on the final image.

Least-squares reverse time migration via linearized waveform inversion using a Wasserstein metric

Geophysics ◽  
2019 ◽  
Vol 84 (5) ◽  
pp. S411-S423
Author(s):  
Peng Yong ◽  
Jianping Huang ◽  
Zhenchun Li ◽  
Wenyuan Liao ◽  
Luping Qu
Keyword(s):  
Least Squares ◽  
Waveform Inversion ◽  
Synthetic Data ◽  
Gradient Algorithm ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Wasserstein Metric ◽  
Time Migration ◽  
Imaging Results ◽  
Primal Dual

Least-squares reverse time migration (LSRTM), an effective tool for imaging the structures of the earth from seismograms, can be characterized as a linearized waveform inversion problem. We have investigated the performance of three minimization functionals as the [Formula: see text] norm, the hybrid [Formula: see text] norm, and the Wasserstein metric ([Formula: see text] metric) for LSRTM. The [Formula: see text] metric used in this study is based on the dynamic formulation of transport problems, and a primal-dual hybrid gradient algorithm is introduced to efficiently compute the [Formula: see text] metric between two seismograms. One-dimensional signal analysis has demonstrated that the [Formula: see text] metric behaves like the [Formula: see text] norm for two amplitude-varied signals. Unlike the [Formula: see text] norm, the [Formula: see text] metric does not suffer from the differentiability issue for null residuals. Numerical examples of the application of three misfit functions to LSRTM on synthetic data have demonstrated that, compared to the [Formula: see text] norm, the hybrid [Formula: see text] norm and [Formula: see text] metric can accelerate LSRTM and are less sensitive to non-Gaussian noise. For the field data application, the [Formula: see text] metric produces the most reliable imaging results. The hybrid [Formula: see text] norm requires tedious trial-and-error tests for the judicious threshold parameter selection. Hence, the more automatic [Formula: see text] metric is recommended as a robust alternative to the customary [Formula: see text] norm for time-domain LSRTM.

Diffraction imaging for fault-karst structure by least-squares reverse time migration

2020 ◽  
pp. 1-40
Author(s):  
Xinru Mu ◽  
Jianping Huang ◽  
Liyun Fu ◽  
Shikai Jian ◽  
Bing Hu ◽  
...  
Keyword(s):  
Least Squares ◽  
Western China ◽  
Small Scale ◽  
Imaging Method ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Imaging Results ◽  
Heterogeneous Structures ◽  
Karst Reservoir

The fault-karst reservoir, which evolved from the deformation and karstification of carbonate rock, is one of the most important reservoir types in western China. Along the deep-seated fault zones, there are a lot widely spread and densely distributed fractures and vugs. The energy of the diffractions generated by heterogeneous structures, such as faults, fractures and vugs, are much weaker than that of the reflections produced by continuous formation interface. When using conventional full wavefield imaging method, the imaging results of continuous layers usually cover small-scale heterogeneities. Given that, we use plane-wave destruction (PWD) filter to separate the diffractions from the full data and image the separated diffractions using least-squares reverse time migration (LSRTM) method. We use several numerical examples to demonstrate that the newly developed diffractions LSRTM (D-LSRTM) can improve the definition of the heterogeneous structures, characterize the configuration and internal structure of the fault-karst structure well and enhance the interpretation accuracy for fault-karst reservoir.

Sign in / Sign up

Export Citation Format

Share Document