Diffraction imaging using pseudo dip-angle gather

2021 ◽  
Author(s):  
Lu Liu ◽  
Yi Luo
Keyword(s):  
Diffraction Imaging ◽  
Dip Angle ◽  
Angle Gather

3D diffraction imaging with Kirchhoff time migration using vertical traveltime difference gathers

Geophysics ◽  
2019 ◽  
Vol 84 (6) ◽  
pp. S555-S566 ◽  
Author(s):  
Zhengwei Li ◽  
Jianfeng Zhang
Keyword(s):  
Fresnel Zone ◽  
Lateral Position ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Small Scale ◽  
Imaging Method ◽  
Time Migration ◽  
Diffraction Imaging ◽  
Dip Angle ◽  
Angle Gather

We have built a vertical traveltime difference (VTD) gather to image diffractions in the 3D time domain. This significantly improves detection of small-scale faults and heterogeneities in 3D seismic data. The VTD gather is obtained using 3D Kirchhoff prestack time migration based on the traveltime-related inline and crossline dip angles, which is closely related to the 2D dip-angle gather. In VTD gathers, diffraction events exhibit flattening, whereas reflection events have convex upward-sloping shapes. Different from the 2D dip-angle gather, Fresnel zone-related specular reflections are precisely focused on the given regions over all offsets and azimuths, thus leaving more diffraction energy after muting. To image linear diffractors, such as faults in three dimensions, the VTD gather can be extended into two dimensions by adding a dip-azimuth dimension. This makes it possible to correct phases of edge diffractions and detect the orientations of the linear diffractors. The memory requirement of the VTD or VTD plus azimuth gathers is much less than that of the 2D dip-angle gathers. We can store the gathers at each lateral position and then correct the phase and enhance the weak diffractions in 3D cases. Synthetic and field data tests demonstrate the effectiveness of our 3D diffraction imaging method.

Imaging 3-D faults using diffractions with modified dip-angle gathers

2019 ◽  
Vol 220 (3) ◽  
pp. 1569-1584
Author(s):  
Zhengwei Li ◽  
Jianfeng Zhang
Keyword(s):  
Fresnel Zone ◽  
Specular Reflection ◽  
Small Scale ◽  
Accurate Identification ◽  
Time Migration ◽  
Diffraction Imaging ◽  
Prestack Time Migration ◽  
Dip Angle ◽  
Angle Gather ◽  
Fresnel Zones

SUMMARY Accurate identification of the locations and orientations of small-scale faults plays an important role in seismic interpretation. We have developed a 3-D migration scheme that can image small-scale faults using diffractions in time. This provides a resolution beyond the classical Rayleigh limit of half a wavelength in detecting faults. The scheme images weak diffractions by building a modified dip-angle gather, which is obtained by replacing the two dip angles dimensions of the conventional 2-D dip-angle gather with tangents of the dip angles. We build the modified 2-D dip-angle gathers by calculating the tangents of dip angles following 3-D prestack time migration (PSTM). In the resulting modified 2-D dip-angle gathers, the Fresnel zone related to the specular reflection exhibits an ellipse. Comparing with the conventional 2-D dip-angle gather, diffraction event related a fault exhibits a straight cylinder shape with phase-reversal across a line related the orientation of the fault. As a result, we can not only mute the Fresnel zones related to reflections, correct phase for edge diffractions and obtain the image of faults, but also detect the orientations of 3-D faults using the modified dip-angle gathers. Like the conventional dip-angle gathers, the modified dip-angle gathers can also be used to image diffractions resulting from other sources. 3-D Field data tests demonstrate the validity of the proposed diffraction imaging scheme.

Seismic diffraction separation in the near-surface: Detection of high contrast voids in unconsolidated soils

Geophysics ◽  
2021 ◽  
pp. 1-72
Author(s):  
Parsa Bakhtiari Rad ◽  
Craig J. Hickey
Keyword(s):  
Soft Soil ◽  
Processing Parameters ◽  
Imaging Method ◽  
Data Sets ◽  
High Contrast ◽  
Near Surface ◽  
Time Migration ◽  
Diffraction Imaging ◽  
Dip Angle ◽  
Scattering Time

Seismic diffractions carry the signature of near-surface high-contrast anomalies and need to be extracted from the data to complement the reflection processing and other geophysical techniques. Since diffractions are often masked by reflections, surface waves and noise, a careful diffraction separation is required as a first step for diffraction imaging. A multiparameter time-imaging method is employed to separate near-surface diffractions. The implemented scheme makes use of the wavefront attributes that are reliable fully data-derived processing parameters. To mitigate the effect of strong noise and wavefield interference in near-surface data, the proposed workflow incorporates two wavefront-based parameters, dip angle and coherence, as additional constraints. The output of the diffraction separation is a time trace-based stacked section that provides the basis for further analysis and applications such as time migration. To evaluate the performance of the proposed wavefront-based workflow, it is applied to two challenging field data sets that were collected over small culverts in very near-surface soft soil environments. The results of the proposed constrained workflow and the existing unconstrained approach are presented and compared. The proposed workflow demonstrates superiority over the existing method by attenuating more reflection and noise, leading to improved diffraction separation. The abundance of unmasked diffractions reveal that the very near-surface is highly scattering. Time migration is carried out to enhance the anomaly detection by focusing of the isolated diffractions. Although strong diffractivity is observed at the approximate location of the targets, there are other diffracting zones observed in the final sections that might bring uncertainties for interpretation.

Wavefield decomposition in arbitrary direction and an imaging condition based on stratigraphic dip

Geophysics ◽  
2020 ◽  
Vol 85 (5) ◽  
pp. S299-S312
Author(s):  
Xuebao Guo ◽  
Ying Shi ◽  
Weihong Wang ◽  
Hongliang Jing ◽  
Zhen Zhang
Keyword(s):  
Hilbert Transform ◽  
New Method ◽  
Frequency Noise ◽  
Arbitrary Direction ◽  
Vector Method ◽  
Imaging Condition ◽  
Dip Angle ◽  
The Hilbert Transform ◽  
Angle Gather ◽  
Wavefield Decomposition

In reverse time migration (RTM), wavefield decomposition can play an important role in addressing the issue of migration noise, especially low-frequency noise. The complete wavefield decomposition based on the Hilbert transform is a commonly used method in RTM, but it is accompanied by extra wavefield simulation and wavefield storage. We have developed three distinct methods. The first is a convenient method for wavefield decomposition, which is based on Poynting vectors. Only the unit vector in one direction is needed to realize the wavefield decomposition in an arbitrary direction by this method. It breaks through the limitation that the Hilbert transform-based method is applicable only to the up- and downgoing wave or left- and right-going wave decomposition, and the calculation cost is negligible compared with RTM. The second is a method based on the instantaneous wavenumber, which we developed for calculating the wave propagation direction. On the basis of wavefield decomposition, the imaging angle gather from the new method performs better than that of the Poynting vector method. Meanwhile, it also is used for generating the incident angle gather and dip angle gather. The latter expresses the dip angle of underground strata. More importantly, the above methods allow us to control the wavefield decomposition direction and three angles at any position underground. The third adopts a stratigraphic imaging condition method, and we briefly analyze the relationship between the new method and the inverse-scattering imaging condition. The stratigraphic imaging condition maps the results to the dip angle of the stratum through a spatial gradient wavefield, which can enhance the effective imaging information. The above three kinds of angle gathers also can be constructed by the stratigraphic imaging condition. Numerical experiments demonstrate that the imaging results and the angle gathers obtained by our proposed method have higher accuracy and resolution.

Diffraction imaging using shot and opening-angle gathers: A prestack time migration approach

Geophysics ◽  
2014 ◽  
Vol 79 (2) ◽  
pp. S23-S33 ◽  
Author(s):  
Jianfeng Zhang ◽  
Jiangjie Zhang
Keyword(s):  
Field Data ◽  
Opening Angle ◽  
Small Scale ◽  
Time Migration ◽  
Crucial Problem ◽  
Diffraction Imaging ◽  
Prestack Time Migration ◽  
Angle Gather ◽  
Fresnel Zones ◽  
Migration Velocities

We have developed a migration scheme that can image weak diffractions in time. This significantly contributes to conventional interpretation in detecting small-scale faults and heterogeneities. The proposed scheme images diffractions using the shot and opening-angle gathers generated by prestack time migration (PSTM). Here, the shot and opening-angle gather represents a 2D migrated gather in terms of shot locations and opening angles between the incident- and scattered-rays. We muted the Fresnel zones related to reflections, corrected phases of diffractions, and enhanced diffractions in the migrated gathers. As a result, the proposed diffraction PSTM can image diffractions with and without phase-reversal. Moreover, the weak diffractions tangent to reflections can be clearly imaged. Diffraction PSTM can update migration velocities according to behaviors of reflection and diffraction events in the migrated gathers by scanning, thus overcoming a crucial problem in diffraction imaging. The reflector dips used in diffraction PSTM are obtained by picking the angles related to reflections in the shot and opening-angle gathers for a partial migration. Synthetic and field data tests demonstrate the validity of diffraction PSTM.

Wave-equation diffraction imaging using pseudo dip-angle gather

Geophysics ◽  
2022 ◽  
pp. 1-45
Author(s):  
Lu Liu ◽  
Yue Ma ◽  
Yang Zhao ◽  
Yi Luo
Keyword(s):  
Wave Equation ◽  
Plane Wave ◽  
Incident Angle ◽  
Median Filter ◽  
Computational Cost ◽  
Scattered Wave ◽  
Vertical Axis ◽  
Wave Source ◽  
Dip Angle ◽  
Angle Gather

Diffraction images can directly indicate local heterogeneities such as faults, fracture zones, and erosional surfaces that are of high interest in seismic interpretation and unconventional reservoir development. We propose a new tool called pseudo dip-angle gather (PDAG) for imaging diffractors using the wave equation. PDAG has significantly lower computational cost compared with the classical dip-angle gather (DAG) due to using plane-wave gathers, a fast local Radon transform algorithm, and one-side decomposition assumption. Pseudo dip angle is measured from the vertical axis to the bisector of the plane-wave surface incident angle and scattered wave-propagation angle. PDAG is generated by choosing the zero lag of the correlation of the plane-wave source wavefields and the decomposed receiver wavefields. It reveals similar diffraction and reflection patterns to DAG, i.e. diffractions spreading as a flat event and reflections focused at a spectacular angle, while they may have dissimilar coverage for diffraction and different focused locations for reflection compared with that of DAG. A windowed median filter is then applied to each PDAG for extracting the diffraction energy and suppressing the focused reflection energy. Besides, the stacked PDAG can be used to evaluate the migration accuracy by measuring the flatness of the image gathers. Numerical tests on both synthetic and field data sets demonstrate that our method can efficiently produce accurate results for diffraction images.

Sign in / Sign up

Export Citation Format

Share Document