Transmission-based surface-consistent framework for residual statics, deconvolution, and FWI: A new paradigm for near-surface analysis

2020 ◽  
Vol 39 (6) ◽  
pp. 382-390
Author(s):  
Daniele Colombo ◽  
Diego Rovetta ◽  
Ernesto Sandoval ◽  
Apostolos Kontakis
Keyword(s):  
Surface Analysis ◽  
Reservoir Characterization ◽  
Waveform Inversion ◽  
Velocity Estimation ◽  
Time Shift ◽  
New Paradigm ◽  
Near Surface ◽  
Full Waveform ◽  
Minimal Data ◽  
Refracted Waves

We developed a novel surface-consistent processing framework that applies to transmitted wavefields (e.g., diving waves/refracted waves). Automatic velocity estimation from traveltime and full-waveform inversion, residual time shift corrections, and near-surface amplitude deconvolution are performed on the raw seismic gathers with minimal data preconditioning. In this implementation of the transmission-based surface-consistent analysis, we introduce a complete prestack and preprocessing workflow to fully analyze the near surface and enable highly specialized processes for what concerns land data imaging and reservoir characterization. Billions of traveltimes and traces can be analyzed automatically, providing enormous benefits in the execution time and in the accuracy and robustness of obtained results. The new paradigm for near-surface analysis opens the door to a better utilization of land seismic data for reservoir imaging and characterization.

Waveform tomography of field vibroseis data using an approximate 2D geometry leads to improved velocity models

Geophysics ◽  
2012 ◽  
Vol 77 (1) ◽  
pp. R33-R43 ◽  
Author(s):  
Brendan R. Smithyman ◽  
Ronald M. Clowes
Keyword(s):  
Waveform Inversion ◽  
Velocity Model ◽  
Surface Velocity ◽  
Time Shift ◽  
Full Waveform Inversion ◽  
Near Surface ◽  
Traveltime Tomography ◽  
Full Waveform ◽  
First Arrival ◽  
Waveform Tomography

Waveform tomography, a combination of traveltime tomography (or inversion) and waveform inversion, is applied to vibroseis first-arrival data to generate an interpretable model of P-wave velocity for a site in the Nechako Basin, south-central British Columbia, Canada. We use constrained 3D traveltime inversion followed by 2D full-waveform inversion to process long-offset (14.4 km) first-arrival refraction waveforms, resulting in a velocity model of significantly higher detail than a conventional refraction-statics model generated for a processing workflow. The crooked-line acquisition of the data set makes 2D full-waveform inversion difficult. Thus, a procedure that improves the tractability of waveform tomography processing of vibroseis data recorded on crooked roads is developed to generate a near-surface ([Formula: see text]) velocity model for the study area. The data waveforms are first static corrected using a time shift determined by 3D raytracing, which accounts for the crossline offsets produced by the crooked-line acquisition. The velocity model generated from waveform tomography exhibits substantial improvement when compared with a conventional refraction-statics model. It also shows improved resolution of sharp discontinuities and low-velocity regions when compared to the model from traveltime tomography alone, especially in regions where the geometry errors are moderate. Interpretation of the near-surface velocity model indicates possible subbasins in the Nechako Basin and delineates the Eocene volcanic rocks of the study area. This approach limits the ability of the full-waveform inversion to fit some propagation modes; however, the tractability of the inversion in the near-surface region is improved. This new development is especially useful in studies that do not warrant 3D seismic acquisition and processing.

FULL-WAVEFORM INVERSION WITH SOURCE AND RECEIVER COUPLING EFFECTS CORRECTION

Geophysics ◽  
2021 ◽  
pp. 1-37
Author(s):  
Xinhai Hu ◽  
Wei Guoqi ◽  
Jianyong Song ◽  
Zhifang Yang ◽  
Minghui Lu ◽  
...  
Keyword(s):  
Waveform Inversion ◽  
Nonlinear Least Squares ◽  
Real Data ◽  
Model Parameters ◽  
Full Waveform Inversion ◽  
Linear Inversion ◽  
Near Surface ◽  
Model Parameter ◽  
Full Waveform ◽  
Coupling Factors

Coupling factors of sources and receivers vary dramatically due to the strong heterogeneity of near surface, which are as important as the model parameters for the inversion success. We propose a full waveform inversion (FWI) scheme that corrects for variable coupling factors while updating the model parameter. A linear inversion is embedded into the scheme to estimate the source and receiver factors and compute the amplitude weights according to the acquisition geometry. After the weights are introduced in the objective function, the inversion falls into the category of separable nonlinear least-squares problems. Hence, we could use the variable projection technique widely used in source estimation problem to invert the model parameter without the knowledge of source and receiver factors. The efficacy of the inversion scheme is demonstrated with two synthetic examples and one real data test.

Tunnel detection at Yuma Proving Ground, Arizona, USA — Part 1: 2D full-waveform inversion experiment

Geophysics ◽  
2019 ◽  
Vol 84 (1) ◽  
pp. B95-B105 ◽  
Author(s):  
Yao Wang ◽  
Richard D. Miller ◽  
Shelby L. Peterie ◽  
Steven D. Sloan ◽  
Mark L. Moran ◽  
...  
Keyword(s):  
Surface Wave ◽  
Waveform Inversion ◽  
Velocity Profiles ◽  
Infinite Length ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Near Surface ◽  
Tunnel Detection ◽  
Full Waveform ◽  
Wave Methods

We have applied time domain 2D full-waveform inversion (FWI) to detect a known 10 m deep wood-framed tunnel at Yuma Proving Ground, Arizona. The acquired seismic data consist of a series of 2D survey lines that are perpendicular to the long axis of the tunnel. With the use of an initial model estimated from surface wave methods, a void-detection-oriented FWI workflow was applied. A straightforward [Formula: see text] quotient masking method was used to reduce the inversion artifacts and improve confidence in identifying anomalies that possess a high [Formula: see text] ratio. Using near-surface FWI, [Formula: see text] and [Formula: see text] velocity profiles were obtained with void anomalies that are easily interpreted. The inverted velocity profiles depict the tunnel as a low-velocity anomaly at the correct location and depth. A comparison of the observed and simulated waveforms demonstrates the reliability of inverted models. Because the known tunnel has a uniform shape and for our purposes an infinite length, we apply 1D interpolation to the inverted [Formula: see text] profiles to generate a pseudo 3D (2.5D) volume. Based on this research, we conclude the following: (1) FWI is effective in near-surface tunnel detection when high resolution is necessary. (2) Surface-wave methods can provide accurate initial S-wave velocity [Formula: see text] models for near-surface 2D FWI.

A focusing study of near-surface full-waveform inversion based on wave-mode separation

2017 ◽  
Author(s):  
Yao Wang ◽  
Richard Miller ◽  
Shelby Peterie ◽  
Steven Sloan ◽  
Mark Moran ◽  
...  
Keyword(s):  
Waveform Inversion ◽  
Wave Mode ◽  
Full Waveform Inversion ◽  
Near Surface ◽  
Full Waveform ◽  
Mode Separation

3D elastic full-waveform inversion of surface waves in the presence of irregular topography using an envelope-based misfit function

Geophysics ◽  
2018 ◽  
Vol 83 (1) ◽  
pp. R1-R11 ◽  
Author(s):  
Dmitry Borisov ◽  
Ryan Modrak ◽  
Fuchun Gao ◽  
Jeroen Tromp
Keyword(s):  
Surface Wave ◽  
Objective Function ◽  
Surface Waves ◽  
Large Scale ◽  
Body Wave ◽  
Waveform Inversion ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Near Surface ◽  
Full Waveform

Full-waveform inversion (FWI) is a powerful method for estimating the earth’s material properties. We demonstrate that surface-wave-driven FWI is well-suited to recovering near-surface structures and effective at providing S-wave speed starting models for use in conventional body-wave FWI. Using a synthetic example based on the SEG Advanced Modeling phase II foothills model, we started with an envelope-based objective function to invert for shallow large-scale heterogeneities. Then we used a waveform-difference objective function to obtain a higher-resolution model. To accurately model surface waves in the presence of complex tomography, we used a spectral-element wave-propagation solver. Envelope misfit functions are found to be effective at minimizing cycle-skipping issues in surface-wave inversions, and surface waves themselves are found to be useful for constraining complex near-surface features.

Full-waveform inversion with borehole constraints for elastic VTI media

Geophysics ◽  
2020 ◽  
Vol 85 (6) ◽  
pp. R553-R563
Author(s):  
Sagar Singh ◽  
Ilya Tsvankin ◽  
Ehsan Zabihi Naeini
Keyword(s):  
Objective Function ◽  
Reservoir Characterization ◽  
Waveform Inversion ◽  
Low Frequency ◽  
Rock Physics ◽  
Anisotropic Media ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Trade Offs ◽  
Vti Media

The nonlinearity of full-waveform inversion (FWI) and parameter trade-offs can prevent convergence toward the actual model, especially for elastic anisotropic media. The problems with parameter updating become particularly severe if ultra-low-frequency seismic data are unavailable, and the initial model is not sufficiently accurate. We introduce a robust way to constrain the inversion workflow using borehole information obtained from well logs. These constraints are included in the form of rock-physics relationships for different geologic facies (e.g., shale, sand, salt, and limestone). We develop a multiscale FWI algorithm for transversely isotropic media with a vertical symmetry axis (VTI media) that incorporates facies information through a regularization term in the objective function. That term is updated during the inversion by using the models obtained at the previous inversion stage. To account for lateral heterogeneity between sparse borehole locations, we use an image-guided smoothing algorithm. Numerical testing for structurally complex anisotropic media demonstrates that the facies-based constraints may ensure the convergence of the objective function towards the global minimum in the absence of ultra-low-frequency data and for simple (even 1D) initial models. We test the algorithm on clean data and on surface records contaminated by Gaussian noise. The algorithm also produces a high-resolution facies model, which should be instrumental in reservoir characterization.

Sign in / Sign up

Export Citation Format

Share Document