Period Dependence of Response Spectrum Damping Modification Factors due to Source- and Site-Specific Effects

2015 ◽  
Vol 31 (2) ◽  
pp. 745-759 ◽  
Author(s):  
Brendon A. Bradley

Response spectrum damping modification factors are key components of displacement-based seismic design methods. This paper examines the period dependence of damping modification factors as a result of near-source forward directivity, basin-induced surface waves, and surficial soil response by using recorded ground motions from the Canterbury, New Zealand, earthquakes as examples. It is illustrated that spectral peaks in the 5% damped response spectra have systematically different damping modification factors than those suggested by conventional empirical formulas; this is also supported by arguments based on forced vibration theory. Because source- and site-specific effects are increasingly being considered in the development of region- or site-specific design response spectra, this work illustrates the critical need to adequately consider adjustments to damping modification factors to ensure that displacement-based seismic design procedures remain consistent.

2011 ◽  
Vol 194-196 ◽  
pp. 1365-1368
Author(s):  
Chang Lin Fan ◽  
Hui Ji

Displacement based seismic design of RC frame with friction damper is proposed in this paper based on the displacement shape of RC frame. and multi-degree-of-freedom system is transformed into an effective single-degree-of-freedom system. Based on equivalent linearization equivalent period is determined by using the elasto-plastic displacement response spectra, and then the structural members are designed. At the same time, target deformability of the frame and friction damper device is obtained by decomposing the structural storey drift. And the expected deformability of the structure can be guaranteed by appropriate the friction energy dissipation brace. This method could effectively control the seismic performance of the structure in earthquakes.


Author(s):  
G. Michele Calvi ◽  
Daniel P. Abrams ◽  
Hugo Bachmann ◽  
Shaoliang Bai ◽  
Patricio Bonelli ◽  
...  

2003 ◽  
pp. 201-212
Author(s):  
Kiyoshi HIRAO ◽  
Yukinori SAKAGAMI ◽  
Yoshifumi NARIYUKI ◽  
Tsutomu SAWADA

2019 ◽  
Vol 22 (16) ◽  
pp. 3420-3434 ◽  
Author(s):  
Gang Li ◽  
Li-Hua Zhu ◽  
Hong-Nan Li

Passive energy dissipation devices have been proved to be effective and low-cost means of structural control, and a variety of dampers have been developed over the past decades. Hysteretic dampers with hardening post-yielding stiffness have multiphased energy dissipation characteristics because of their hardening behavior, which can compensate for stiffness loss and postpone the collapse of damaged structures. In this article, a hysteretic model is proposed for hysteretic dampers with hardening post-yielding stiffnesses, and a formula is derived for equivalent yield strength expressed by the additional damping of the structure. A procedure is developed for displacement-based seismic design that transforms the relatively complex damping into an acceptable yield strength. A numerical example is only presented for demonstrating the design process and simply validating the proposed method. The results show that the proposed procedure is easy to implement and could produce adequate hysteretic dampers with hardening post-yielding stiffness hardening behavior. The maximum displacement responses of the existing structure retrofitted using the proposed procedure satisfy the expected performance objective well. Thus, this procedure could be an alternative to seismic retrofitting for structures with energy dissipation systems.


Sign in / Sign up

Export Citation Format

Share Document