MIMO Antenna Designs with Diversity Techniques for LTE Applications

Author(s):  
Leeladhar Malviya ◽  
Rajib Kumar Panigrahi ◽  
M. V. Kartikeyan
Author(s):  
D. Rajesh Kumar ◽  
G. Venkat Babu ◽  
K.G. Sujanth Narayan ◽  
N. Raju

Abstract A dual-band 10-port multiple input multiple output (MIMO) antenna array for 5G smartphone is proposed. Each antenna in the MIMO system can work from 3.4 to 3.6 GHz and 5 to 6 GHz with 10 dB (2:1 VSWR) impedance bandwidth. Nevertheless, for a 3:1 VSWR, the antenna operates from 3.3 to 3.8 GHz and 4.67 to 6.24 GHz. The MIMO system is formed by making 10 seven-shaped coupled fed slot antenna elements excited at two different resonant modes and integrated into the system circuit board. By implementing the spatial and polarization diversity techniques, high isolation better than 28 dB between any pair of antenna elements is achieved. The proposed 10-port MIMO antenna array is fabricated and measured. Significant radiation efficiency is obtained, ranging from 65 to 82% for both bands. The antenna gain in the required operating band is substantial, around 3–3.8 dBi. Further, the MIMO parameters such as envelope correlation co-efficient, channel capacity, and total active reflection co-efficient are calculated. The antenna's robustness is estimated by analyzing the user hand effects and specific absorption rate (SAR). The measured results are well agreed with the simulated results.


Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8350
Author(s):  
Sayyed A. Ali ◽  
Mohd Wajid ◽  
Mohammed Usman ◽  
Muhammad S. Alam

This paper proposes a high-order MIMO antenna operating at 3.5 GHz for a 5G new radio. Using an eighth-mode substrate integrated waveguide (EMSIW) cavity and considering a typical smartphone scenario, a two-element MIMO antenna is developed and extended to a twelve-element MIMO. These MIMO elements are closely spaced, and by employing multiple diversity techniques, high isolation is achieved without using a decoupling network. The asymmetric EMSIW structures resulted in radiation pattern diversity, and their orthogonal placement provides polarization diversity. The radiation characteristics and diversity performance are parametrically optimized for a two-element MIMO antenna. The experimental results exhibited 6.0 dB and 10.0 dB bandwidths of 250 and 100 MHz, respectively. The measured and simulated radiation patterns are closely matched with a peak gain of 3.4 dBi and isolation ≥36 dB. Encouraged with these results, higher-order MIMO, namely, four- and twelve-element MIMO are investigated, and isolation ≥35 and ≥22 dB are achieved, respectively. The channel capacity is found equal to 56.37 bps/Hz for twelve-element MIMO, which is nearly 6.25 times higher than the two-element counterpart. The hand and head proximity analysis reveal that the proposed antenna performances are within the acceptable limit. A detailed comparison with the previous works demonstrates that the proposed antenna offers a simple, low-cost, and compact MIMO antenna design solution with a high diversity performance.


Author(s):  
Subuh Pramono ◽  
Muhammad Hamka Ibrahim ◽  
Josaphat Tetuko Sri Sumantyo
Keyword(s):  

2009 ◽  
Vol E92-B (11) ◽  
pp. 3345-3353 ◽  
Author(s):  
Sooyoung KIM ◽  
Unhee PARK ◽  
Hee-Wook KIM ◽  
Do-Seob AHN

2020 ◽  
Author(s):  
G Roopa ◽  
Krishna Chandra ◽  
B Raghavulu ◽  
Md Ismail ◽  
M Kumar Aditya

2020 ◽  
Vol 1529 ◽  
pp. 042016
Author(s):  
Mohd Aminudin Jamlos ◽  
Wan Azani Mustafa ◽  
Syed Zulkarnain Syed Idrus ◽  
Hafizatul Husna
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document