Low-temperature performance test method and improvement measures of emulsified asphalt cold recycling mixture

2021 ◽  
pp. 325-331
Author(s):  
Zhanchuang Han ◽  
Yifu Meng ◽  
Tian Jin ◽  
Liping Liu* ◽  
Lijun Sun*
2014 ◽  
Vol 505-506 ◽  
pp. 35-38 ◽  
Author(s):  
Chun Mei Gao ◽  
Shuo Han ◽  
Shuang Chen ◽  
He Li

Conduct experimental study on low temperature performance about asphalt concrete with 6mm basalt fiber and without basalt, 6mm fibers whose dosage is 0.12%0.15% and 0.17%, test method is the indirect tensile test,test temperature is-10±0.5°C. The results show that basalt fiber improved the strength and failure strain of asphalt concrete in low temperature damage, reduced the failure stiffness,in which the maximum increased value of breaking strength is 3.41%, the maximum increased value of failure strain is 38.83%,and the maximum reduced value of failure stiffness is 25.52%,obviously improved low temperature cracking resistance of asphalt concrete;for low temperature performance, the optimum amount of value about 6mm basalt fiber is 0.15% .


Alloy Digest ◽  
2004 ◽  
Vol 53 (5) ◽  

Abstract Supermet 2205 is a manual metal arc (MMA) electrode with enhanced chromium, molybdenum, and nitrogen levels. It is used for welding standard 22% Cr duplex austenitic/ferritic stainless steels. This datasheet provides information on composition, microstructure, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance as well as joining. Filing Code: SS-903. Producer or source: Metrode Products Ltd.


Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1145
Author(s):  
Wei Li ◽  
Sen Han ◽  
Xiaokang Fu ◽  
Ke Huang

The aims of this paper are to prepare disintegrated high volume crumb rubber asphalt (DHVRA) with low viscosity, good workability and low-temperature performance by adding disintegrating agent (DA) in the preparation process, and to further analyze the disintegrating mechanism and evaluated high-temperature and low-temperature rheological properties. To obtain DHVRA with excellent comprehensive performance, the optimum DA dosage was determined. Based on long-term disintegrating tests and the Fluorescence Microscopy (FM) method, the correlations between key indexes and crumb rubber (CR) particle diameter was analyzed, and the evaluation indicator and disintegrating stage division standard were put forward. Furthermore, Fourier transform infrared spectroscopy (FT-IR) and Gel Permeation Chromatography (GPC) was used to reveal the reaction mechanism, and the contact angle test method was adopted to evaluate the surface free energy (SFE). In addition, the high-temperature and low-temperature rheological properties were measured, and the optimum CR content was proposed. Results indicated that the optimum DA dosage was 7.5‰, and the addition of DA promoted the melt decomposition of CR, reduced the viscosity and improved the storage stability. The 135 °C rotational viscosity (RV) of DHVRA from mixing for 3 h could be reduced to 1.475 Pa·s, and the softening point difference was even less than 2 °C. The linear correlation between 135 °C RV and the diameter of CR particle in rubber asphalt system was as high as 0.968, and the viscosity decay rate (VDR) was used as the standard to divide the disintegrating process into a fast disintegrating stage, stable disintegrating stage and slight disintegrating stage. Compared to common rubber asphalt (CRA), DHVRA has an absorption peak at 960 cm−1 caused by trans olefin = C-H, and higher molecular weight and polar component of surface energy. Compared with CRA, although the high-temperature performance of DHVRA decreases slightly, the low-temperature relaxation ability can be greatly improved.


Sign in / Sign up

Export Citation Format

Share Document