A chill-cast, antimony-arsenic-lead alloy model material has been used to investigate the monotonic and cyclic loading, uniaxial and biaxial plasticity behaviour of a metal at elevated temperature, i.e., T/ Tm ≈ 0.5. For the lead alloy used, a post-machining heat treatment of 96h at 100 C considerably reduced the scatter in the material behaviour. Uniaxial monotonic loading tests showed that the behaviour is relatively independent of temperature and strain-rate for strains less than about 1 per cent. Under cyclic loading conditions, between fixed strain limits, a stable hysteresis loop is obtained after the first cycle for both uniaxial and biaxial stress systems. By taking into account the biaxiality ratio and the increase in yield-range caused by cyclic hardening, the uniaxial and biaxial, cyclic plasticity behaviour was reasonably accurately predicted from the uniaxial, monotonic loading behaviour.
Deformation Behaviours of Dry Sand under Cyclic Loading and a Stress-Dilatancy Model
