Accelerated vs. natural corrosion experimental results for remaining life stage forecasting

2010 ◽  
pp. 35-42 ◽  
Author(s):  
A Torres-Acosta
Keyword(s):  
Life Stage ◽  
Experimental Results ◽  
Remaining Life ◽  
Natural Corrosion

Structural Response and Remaining Life of Damaged Composites

2015 ◽  
Vol 813-814 ◽  
pp. 106-110
Author(s):  
Dalbir Singh ◽  
C. Ganesan ◽  
A. Rajaraman
Keyword(s):  
Hybrid Approach ◽  
Experimental Studies ◽  
Structural Response ◽  
Material Behavior ◽  
Experimental Results ◽  
Life Assessment ◽  
Nonlinear Material ◽  
Remaining Life ◽  
Design Effectiveness ◽  
Remaining Life Assessment

Composites are being used in variety of applications ranging from defense and aircraft structures, where usage is profuse, to vehicle structures and even for repair and rehabilitation. Most of these composites are made of different laminates glued together with matrix for binding and now-a-days fibers of different types are embedded in a composite matrix. The characterizations of material properties of composites are mostly experimental with analytical modeling used to simulate the system behavior. But many times, the composites develop damage or distress in the form of cracking while they are in service and this adds a different dimension as one has to evaluate the response with the damage so that its performance during its remaining life is satisfactory. This is the objective of the present study where a hybrid approach using experimental results on damaged specimens and then analytical finite element are used to evaluate response. This will considerably help in remaining life assessment-RLA- for composites with damage so that design effectiveness with damage could be assessed. This investigation has been carried out on a typical composite with carbon fiber reinforcements, manufactured by IPCL Baroda (India) with trade name INDCARF-30. Experimental studies were conducted on undamaged and damaged specimens to simulate normal continuous loading and discontinuous loading-and-unloading states in actual systems. Based on the experimental results, material characterization inputs are taken and analytical studies were carried out using ANSYS to assess the response under linear and nonlinear material behavior to find the stiffness decay. Using stiffness decay RLA was computed and curves are given to bring the influence of type of damage and load at which damage had occurred.

Late-Life Preparedness and Its Correlates: A Behavioral Perspective on Preparation

2020 ◽  
Author(s):  
Yaeji Kim-Knauss ◽  
Frieder R Lang
Keyword(s):  
Life Stage ◽  
Late Life ◽  
Remaining Life ◽  
Cross Sectional ◽  
Life Expectation ◽  
Perceived Utility ◽  
Life Challenges ◽  
Preparatory Activity ◽  
Behavior Theories ◽  
Behavioral Perspective

Abstract Objectives The present study examined the extent of late-life preparedness and its correlates. In accordance with behavior theories, we postulated that those who have prior experience with caregiving and who perceive such activities as more useful and less risky are more likely to engage in late-life preparatory activities. Because the perceived distance until aging-related life challenges become prevalent may play a role in late-life preparedness, we hypothesized that the effects of the correlates would vary depending on one’s subjective remaining life expectation (SRLE). Methods Building upon cross-sectional data including 581 German adults from 18 to 93 years, we fitted a hurdle model that separately analyzes the presence and variety of self-reported action engagement to better handle the zero-inflated count measure of preparatory activities. Results The results revealed that the effects of perceived utility, caregiving experience, and SRLE were significant for both the presence and variety of activities. SRLE was found to moderate the observed effects in the models: The effect of perceived utility on the presence of at least one late-life preparatory activity was larger for those with lower SRLE. In contrast, among those with higher SRLE, having provided care increased the variety of preparatory activities. Discussion Findings suggest that some of the examined psychosocial factors are similarly associated with both the presence of at least one and the variety of late-life preparatory activities, although the extent of their effects varies depending on one’s subjective life stage.

Cumulative Fatigue Damage Under Stress-Controlled Conditions

1971 ◽  
Vol 93 (4) ◽  
pp. 691-698 ◽  
Author(s):  
Thang Bui Quoc ◽  
J. Dubuc ◽  
A. Bazergui ◽  
A. Biron
Keyword(s):  
Theoretical Analysis ◽  
Fatigue Damage ◽  
Experimental Results ◽  
Published Data ◽  
Mean Stress ◽  
Remaining Life ◽  
Random Loading ◽  
Controlled Conditions ◽  
Cumulative Fatigue Damage ◽  
Good Agreement

A theoretical analysis of uniaxial cumulative fatigue damage is presented together with a large number of experimental results on unnotched specimens of A-201 and A-517 steels. The theory developed permits the prediction of fatigue curves for stress-controlled conditions with zero or positive mean stress as well as the evaluation of the damage accumulated during a fatigue test and hence the prediction of the remaining life of a specimen. Theory is in good agreement with the experimental results as well as with published data on other materials. The development may be extended to other types of tests such as strain-controlled or random loading conditions.

Diagnostics of Gold Laser Plasmas

1988 ◽  
Vol 102 ◽  
pp. 357-360
Author(s):  
J.C. Gauthier ◽  
J.P. Geindre ◽  
P. Monier ◽  
C. Chenais-Popovics ◽  
N. Tragin ◽  
...  
Keyword(s):  
Experimental Results ◽  
Pure Gold ◽  
Electronic Temperature ◽  
X Ray ◽  
Laser Plasmas ◽  
Collisional Radiative Model ◽  
Radiative Model

AbstractIn order to achieve a nickel-like X ray laser scheme we need a tool to determine the parameters which characterise the high-Z plasma. The aim of this work is to study gold laser plasmas and to compare experimental results to a collisional-radiative model which describes nickel-like ions. The electronic temperature and density are measured by the emission of an aluminium tracer. They are compared to the predictions of the nickel-like model for pure gold. The results show that the density and temperature can be estimated in a pure gold plasma.

Observation of Phase Contrast Images in STEM and CTEM Modes by Using 100 kV Field Emission Electron Gun

1974 ◽  
Vol 32 ◽  
pp. 390-391
Author(s):  
Y. Harada ◽  
T. Goto ◽  
H. Koike ◽  
T. Someya
Keyword(s):  
Field Emission ◽  
Phase Contrast ◽  
Image Formation ◽  
Fresnel Diffraction ◽  
Experimental Results ◽  
Electron Gun ◽  
Scanning Microscopy ◽  
Emission Electron ◽  
Lattice Images

Since phase contrasts of STEM images, that is, Fresnel diffraction fringes or lattice images, manifest themselves in field emission scanning microscopy, the mechanism for image formation in the STEM mode has been investigated and compared with that in CTEM mode, resulting in the theory of reciprocity. It reveals that contrast in STEM images exhibits the same properties as contrast in CTEM images. However, it appears that the validity of the reciprocity theory, especially on the details of phase contrast, has not yet been fully proven by the experiments. In this work, we shall investigate the phase contrast images obtained in both the STEM and CTEM modes of a field emission microscope (100kV), and evaluate the validity of the reciprocity theory by comparing the experimental results.

A new dissociation mode for dislocations in silicon

1978 ◽  
Vol 36 (1) ◽  
pp. 346-347
Author(s):  
A. Ourmazd ◽  
G.R. Booker ◽  
C.J. Humphreys
Keyword(s):  
Detailed Examination ◽  
Experimental Results ◽  
Dislocation Network ◽  
Weak Beam ◽  
Phosphorus Doped

A (111) phosphorus-doped Si specimen, thinned to give a TEM foil of thickness ∼ 150nm, contained a dislocation network lying on the (111) plane. The dislocation lines were along the three <211> directions and their total Burgers vectors,ḇt, were of the type , each dislocation being of edge character. TEM examination under proper weak-beam conditions seemed initially to show the standard contrast behaviour for such dislocations, indicating some dislocation segments were undissociated (contrast A), while other segments were dissociated to give two Shockley partials separated by approximately 6nm (contrast B) . A more detailed examination, however, revealed that some segments exhibited a third and anomalous contrast behaviour (contrast C), interpreted here as being due to a new dissociation not previously reported. Experimental results obtained for a dislocation along [211] with for the six <220> type reflections using (g,5g) weak-beam conditions are summarised in the table below, together with the relevant values.

Multislice calculations of RHEED patterns from vicinal Si (001)

1993 ◽  
Vol 51 ◽  
pp. 1000-1001
Author(s):  
Scott Lordi
Keyword(s):  
Misorientation Angle ◽  
Incident Angle ◽  
Incident Beam ◽  
Experimental Results ◽  
Bragg Condition ◽  
Vicinal Surfaces ◽  
Kinematic Theory ◽  
Step Edges

Vicinal Si (001) surfaces are interesting because they are good substrates for the growth of III-V semiconductors. Spots in RHEED patterns from vicinal surfaces are split due to scattering from ordered step arrays and this splitting can be used to determine the misorientation angle, using kinematic arguments. Kinematic theory is generally regarded to be inadequate for the calculation of RHEED intensities; however, only a few dynamical RHEED simulations have been attempted for vicinal surfaces. The multislice formulation of Cowley and Moodie with a recently developed edge patching method was used to calculate RHEED patterns from vicinal Si (001) surfaces. The calculated patterns are qualitatively similar to published experimental results and the positions of the split spots quantitatively agree with kinematic calculations.RHEED patterns were calculated for unreconstructed (bulk terminated) Si (001) surfaces misoriented towards [110] ,with an energy of 15 keV, at an incident angle of 36.63 mrad ([004] bragg condition), and a beam azimuth of [110] (perpendicular to the step edges) and the incident beam pointed down the step staircase.

Sign in / Sign up

Export Citation Format

Share Document