scholarly journals Geothermal Power Growth 1995–2013: A Comparison with Other Renewables

Energies ◽  
2014 ◽  
Vol 7 (8) ◽  
pp. 4802-4812 ◽  
Author(s):  
Ladislaus Rybach

Alloy Digest ◽  
1993 ◽  
Vol 42 (11) ◽  

Abstract AL 29-4C is a highly corrosion resistant alloy with a relatively high strength. This combination allows the use of lighter gage tubes, and has led to its use in the brine heat exchangers of geothermal power plants. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-554. Producer or source: Allegheny Ludlum Corporation.


2017 ◽  
Author(s):  
Renato Somma ◽  
◽  
Domenico Granieri ◽  
Claudia Troise ◽  
Carlo Terranova ◽  
...  

2015 ◽  
Vol 7 (11) ◽  
pp. 15262-15283 ◽  
Author(s):  
Lorenzo Bruscoli ◽  
Daniele Fiaschi ◽  
Giampaolo Manfrida ◽  
Duccio Tempesti

Author(s):  
Michael O’Sullivan ◽  
Michael Gravatt ◽  
Joris Popineau ◽  
John O’Sullivan ◽  
Warren Mannington ◽  
...  

2021 ◽  
Vol 13 (4) ◽  
pp. 1935
Author(s):  
Vitantonio Colucci ◽  
Giampaolo Manfrida ◽  
Barbara Mendecka ◽  
Lorenzo Talluri ◽  
Claudio Zuffi

This study deals with the life cycle assessment (LCA) and an exergo-environmental analysis (EEvA) of the geothermal Power Plant of Hellisheiði (Iceland), a combined heat and power double flash plant, with an installed power of 303.3 MW for electricity and 133 MW for hot water. LCA approach is used to evaluate and analyse the environmental performance at the power plant global level. A more in-depth study is developed, at the power plant components level, through EEvA. The analysis employs existing published data with a realignment of the inventory to the latest data resource and compares the life cycle impacts of three methods (ILCD 2011 Midpoint, ReCiPe 2016 Midpoint-Endpoint, and CML-IA Baseline) for two different scenarios. In scenario 1, any emission abatement system is considered. In scenario 2, re-injection of CO2 and H2S is accounted for. The analysis identifies some major hot spots for the environmental power plant impacts, like acidification, particulate matter formation, ecosystem, and human toxicity, mainly caused by some specific sources. Finally, an exergo-environmental analysis allows indicating the wells as significant contributors of the environmental impact rate associated with the construction, Operation & Maintenance, and end of life stages and the HP condenser as the component with the highest environmental cost rate.


Sign in / Sign up

Export Citation Format

Share Document