Report on 20 MW Geothermal Power Plant with Steam Gathering and Brine Injection at Roosevelt Hot Springs, Utah: Preliminary design, construction cost, financial study

1980 ◽  
Author(s):  
2018 ◽  
Vol 7 (2) ◽  
Author(s):  
Amiral Aziz

The importance of exergy analysis in preliminary design of geothermal power has been proven. An exergy analysis was carried out and the locations and quantities of exergy losses, wastes and destructions in the different processes of the plan were pinpointed. The obtained results show that the total exergy available from production wells KMJ 68 was calculated to be 6967.55 kW. The total exergy received from wells which is connected during the analysis and enter into the separator was found to be 6337.91 kW in which 5808.8 kW is contained in the steam phase. The overall exergy efficiency for the power plant is 43.06% and the overall energy efficiency is 13.05 %, in both cases with respect to the exergy from the connected wells. The parts of the system with largest exergy destruction are the condenser, the turbine, and the disposed waste brinekeywords: exergy, irreversibility, geothermal power plant, KMJ 68


Evergreen ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 162-167
Author(s):  
Bambang Teguh Prasetyo ◽  
Suyanto ◽  
MAM Oktaufik ◽  
S. Himawan

2021 ◽  
Vol 13 (4) ◽  
pp. 1935
Author(s):  
Vitantonio Colucci ◽  
Giampaolo Manfrida ◽  
Barbara Mendecka ◽  
Lorenzo Talluri ◽  
Claudio Zuffi

This study deals with the life cycle assessment (LCA) and an exergo-environmental analysis (EEvA) of the geothermal Power Plant of Hellisheiði (Iceland), a combined heat and power double flash plant, with an installed power of 303.3 MW for electricity and 133 MW for hot water. LCA approach is used to evaluate and analyse the environmental performance at the power plant global level. A more in-depth study is developed, at the power plant components level, through EEvA. The analysis employs existing published data with a realignment of the inventory to the latest data resource and compares the life cycle impacts of three methods (ILCD 2011 Midpoint, ReCiPe 2016 Midpoint-Endpoint, and CML-IA Baseline) for two different scenarios. In scenario 1, any emission abatement system is considered. In scenario 2, re-injection of CO2 and H2S is accounted for. The analysis identifies some major hot spots for the environmental power plant impacts, like acidification, particulate matter formation, ecosystem, and human toxicity, mainly caused by some specific sources. Finally, an exergo-environmental analysis allows indicating the wells as significant contributors of the environmental impact rate associated with the construction, Operation & Maintenance, and end of life stages and the HP condenser as the component with the highest environmental cost rate.


Geothermics ◽  
2021 ◽  
Vol 96 ◽  
pp. 102203
Author(s):  
Motoaki Morita ◽  
Ayumu Yamaguchi ◽  
Sota Koyama ◽  
Shinichi Motoda

Sign in / Sign up

Export Citation Format

Share Document