Passive Suspension System Optimization Using PSO to Enhance Ride Comfort when Crossing Different Types of Speed Control Profiles

2015 ◽  
Vol 3 (2) ◽  
Author(s):  
A. Elsawaf ◽  
T. Vampola
Keyword(s):  
Ride Comfort ◽  
Speed Control ◽  
System Optimization ◽  
Suspension System ◽  
Passive Suspension ◽  
Different Types ◽  
Passive Suspension System

Active Vehicle Suspension Control Using Full State-Feedback Controller

2015 ◽  
Vol 1115 ◽  
pp. 440-445 ◽  
Author(s):  
Musa Mohammed Bello ◽  
Amir Akramin Shafie ◽  
Raisuddin Khan
Keyword(s):  
State Feedback ◽  
Ride Comfort ◽  
Active Suspension ◽  
Suspension System ◽  
Feedback Controller ◽  
Vehicle Suspension ◽  
Passive Suspension ◽  
Full State ◽  
Full State Feedback ◽  
Passive Suspension System

The main purpose of vehicle suspension system is to isolate the vehicle main body from any road geometrical irregularity in order to improve the passengers ride comfort and to maintain good handling stability. The present work aim at designing a control system for an active suspension system to be applied in today’s automotive industries. The design implementation involves construction of a state space model for quarter car with two degree of freedom and a development of full state-feedback controller. The performance of the active suspension system was assessed by comparing it response with that of the passive suspension system. Simulation using Matlab/Simulink environment shows that, even at resonant frequency the active suspension system produces a good dynamic response and a better ride comfort when compared to the passive suspension system.

A New Variable Stiffness Suspension Mechanism

2011 ◽  
Author(s):  
Olugbenga M. Anubi ◽  
Carl D. Crane
Keyword(s):  
Transfer Function ◽  
Ride Comfort ◽  
Main Idea ◽  
Variable Stiffness ◽  
Suspension System ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Road Disturbance ◽  
Passive Suspension System ◽  
Suspension Performance

A new variable stiffness suspension system based on a recent variable stiffness mechanism is proposed. The overall system is composed of the traditional passive suspension system augmented with a variable stiffness mechanism. The main idea is to improve suspension performance by varying stiffness in response to road disturbance. The system is analyzed using a quarter car model. The passive case shows much better performance in ride comfort over the tradition counterpart. Analysis of the invariant equation shows that the car body acceleration transfer function magnitude can be reduced at both the tire-hop and rattle space frequencies using the lever displacement transfer function thereby resulting in a better performance over the traditional passive suspension system. An H∞ controller is designed to correct for the performance degradation in the rattle space thereby providing the best trade-off between the ride comfort, suspension deflection and road holding.

Ride comfort of a higher speed rail vehicle using a magnetorheological suspension system

2017 ◽  
Vol 232 (1) ◽  
pp. 32-48 ◽  
Author(s):  
Sunil Kumar Sharma ◽  
Anil Kumar
Keyword(s):  
Ride Comfort ◽  
Suspension System ◽  
Magnetorheological Damper ◽  
Ride Quality ◽  
Railway Vehicle ◽  
Passive Suspension ◽  
Railway Vehicles ◽  
Rail Vehicle ◽  
Passive Suspension System ◽  
Secondary Suspension

In a railway vehicle, vibrations are generated due to the interaction between wheel and track. To evaluate the effect of vibrations on the ride quality and comfort of a passenger vehicle, the Sperling's ride index method is frequently adopted. This paper focuses on the feasibility of improving the ride quality and comfort of railway vehicles using semiactive secondary suspension based on magnetorheological fluid dampers. Equations of vertical, pitch and roll motions of car body and bogies are developed for an existing rail vehicle. Moreover, nonlinear stiffness and damping functions of passive suspension system are extracted from experimental data. In view of improvement in the ride quality and comfort of the rail vehicle, a magnetorheological damper is integrated in the secondary vertical suspension system. Parameters of the magnetorheological damper depend on current, amplitude and frequency of excitations. Three semi-active suspension strategies with magnetorheological damper are analysed at different running speeds and for periodic track irregularity. The performance indices calculated at different semi-active strategies are juxtaposed with the nonlinear passive suspension system. Simulation results establish that magnetorheological damper strategies in the secondary suspension system of railway vehicles reduce the vertical vibrations to a great extent compared to the existing passive system. Moreover, they lead to improved ride quality and passenger comfort.

H∞ Control of Active Suspension System for a Quarter Car Model

2016 ◽  
Vol 8 (1) ◽  
Author(s):  
N.M. Ghazaly ◽  
A.S Ahmed ◽  
A.S Ali ◽  
G.T Abd El- Jaber
Keyword(s):  
Ride Comfort ◽  
Active Suspension ◽  
Suspension System ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Suspension Systems ◽  
Car Model ◽  
Active Suspension Systems ◽  
Passive Suspension System ◽  
Quarter Car

In recent years, the use of active control mechanisms in active suspension systems has attracted considerable attention. The main objective of this research is to develop a mathematical model of an active suspension system that is subjected to excitation from different road profiles and control it using H∞ technique for a quarter car model to improve the ride comfort and road handling. Comparison between passive and active suspension systems is performed using step, sinusoidal and random road profiles. The performance of the H∞ controller is compared with the passive suspension system. It is found that the car body acceleration, suspension deflection and tyre deflection using active suspension system with H∞ technique is better than the passive suspension system.

Intelligent Sliding Mode Controller for Active Suspension System Using Particle Swarm Optimization

2014 ◽  
Vol 69 (1) ◽  
Author(s):  
Mahmood Ali Moqbel Obaid ◽  
Abdul Rashid Husain ◽  
Ali Abdo Mohammed Al-kubati
Keyword(s):  
Particle Swarm Optimization ◽  
Ride Comfort ◽  
Sliding Mode ◽  
Pso Algorithm ◽  
Suspension System ◽  
Sliding Mode Controller ◽  
Swarm Optimization ◽  
Passive Suspension ◽  
Passive Suspension System ◽  
Mismatched Uncertainty

This paper considers the control of an active suspension system (ASS) for a quarter car model based on the fusion of robust control and computational intelligence techniques. The objective of designing a controller for the car suspension system is to improve the ride comfort while maintaining the constraints on to the suspension travel and tire deformation subjected to different road profile. However, due to the mismatched uncertainty in the mathematical model of the ASS, sliding mode control (SMC) cannot be applied directly to control the system. Thus, the purpose of this work is to adapt the SMC technique for the control of ASS, where particle swarm optimization (PSO) algorithm is utilized to design the sliding surface such that the effect of the mismatched uncertainty can be minimized. The performance of the proposed sliding mode controller based on the PSO algorithm is compared with the linear quadratic optimal control (LQR) and the existing passive suspension system. In comparison with the other control methods, the simulation results demonstrate the superiority of the proposed controller, where it significantly improved the ride comfort 67% and 25% more than the passive suspension system and the LQR controller, respectively. 

scholarly journals Optimal Control Design of Active Suspension System Based on Quarter Car Model

2019 ◽  
Vol 11 (2) ◽  
pp. 55
Author(s):  
Nur Uddin
Keyword(s):  
Optimal Control ◽  
Ride Comfort ◽  
Control Design ◽  
Active Suspension ◽  
Suspension System ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Car Model ◽  
Passive Suspension System ◽  
Quarter Car

The optimal control design of the ground-vehicle active suspension system is presented. The active suspension system is to improve the vehicle ride comfort by isolating vibrations induced by the road profile and vehicle velocity. The vehicle suspension system is approached by a quarter car model. Dynamic equations of the system are derived by applying Newton’s second law. The control law of the active suspension system is designed using linear quadratic regulator (LQR) method. Performance evaluation is done by benchmarking the active suspension system to a passive suspension system. Both suspension systems are simulated in computer. The simulation results show that the active suspension system significantly improves the vehicle ride comfort of the passive suspension system by reducing 50.37% RMS of vertical displacement, 45.29% RMS of vertical velocity, and 1.77% RMS of vertical acceleration.

scholarly journals Intelligent Cuckoo Search Algorithm of PID and Skyhook Controller for Semi-Active Suspension System using Magneto-Rheological Damper

2021 ◽  
Vol 17 (4) ◽  
pp. 402-415
Author(s):  
A. H. Mohd Yamin ◽  
I. Z. Mat Darus ◽  
N.S. Mohd Nor ◽  
M. H. Ab Talib
Keyword(s):  
Ride Comfort ◽  
Search Algorithm ◽  
Cuckoo Search ◽  
Cuckoo Search Algorithm ◽  
Suspension System ◽  
Passive Suspension ◽  
Body Acceleration ◽  
Percentage Improvement ◽  
Passive Suspension System ◽  
Magneto Rheological

This article introduces the application of the Cuckoo Search (CS) Algorithm to tune Proportional-Integral-Derivative (PID) and Skyhook controller for the semi-active (SA) suspension system further to improve the vehicle’s ride comfort and stability. Meanwhile, the PID-CSA and Skyhook-CSA intelligent approaches have been compared to the passive suspension system. The performances of the PID controller and Skyhook controller are optimised by Cuckoo Search (CS) Algorithm, respectively. The system’s mean square error (MSE) is defined as an objective function for optimising the proposed controllers. The performance of the proposed PID-CSA and Skyhook-CSA controllers are evaluated with the passive suspension system in the form of body acceleration, body displacement, and tire acceleration. The sinusoidal road profile is set as the disturbance of this system. The percentage improvement for body acceleration and body displacement achieved about 25% for the PID-CSA controller and 1-4% for Skyhook-CSA. These simulated results reflect that the proposed controllers outperformed in comparison with other considered methods to obtain the most effective vehicle stability and ride comfort.

scholarly journals Dynamic Analysis of an Optimal Active Suspension System Using Global Search Optimization

2018 ◽  
Vol 7 (3.17) ◽  
pp. 43
Author(s):  
Muna Khalil Shehan ◽  
B B. Sahari ◽  
Nawal Aswan B. Abdul Jalil ◽  
Tang Sai Hong ◽  
Azizan B. As'arry
Keyword(s):  
Ride Comfort ◽  
Active Suspension ◽  
Global Search ◽  
Suspension System ◽  
Index Formula ◽  
Passive Suspension ◽  
Active Elements ◽  
Search Optimization ◽  
Passive Suspension System ◽  
Quarter Car

This paper addresses ride comfort for quarter car active suspension system. Suspension dynamics are modelled by using two degree of freedom vibrating system, linear with time invariant quarter car model to capture the system dynamics when it is subjected to the road disturbance with different velocities. Global search optimization method is a strategy that overcomes the defects of the suspension system performance index formula, objective function (discontinuity, non-smooth) is used to find the optimal suspension spring stiffness and damping coefficient. The optimal active suspension system design is tested when the active elements is malfunctioned. The optimal design is compared with optimal passive suspension system in terms of ride comfort. The results showed that the optimal passive elements of optimal active suspension system provided better ride comfort ( ) even at the absent of the active elements compared to optimal passive suspension system. 

Design and optimization of a semi-active suspension system for a two-wheeled vehicle using a full multibody model

2016 ◽  
Vol 231 (4) ◽  
pp. 630-646 ◽  
Author(s):  
A Khadr ◽  
A Houidi ◽  
L Romdhane
Keyword(s):  
Ride Comfort ◽  
Optimization Procedure ◽  
Active Suspension ◽  
Suspension System ◽  
Multi Objective Optimization ◽  
Nsga Ii ◽  
Passive Suspension ◽  
Multi Objective ◽  
Wheeled Vehicle ◽  
Passive Suspension System

This paper focuses on the design and the optimization of a semi-active suspension system used in a full dynamic model of a two-wheeled vehicle. The two-wheeled vehicle is considered as a multibody system. The equations of motion are obtained by applying an approach used widely in the robotic modeling field. Two basic strategies, called the continuous skyhook and the modified skyhook, are used to control the semi-active suspension system. Using the developed model, a multi-objective optimization procedure, based on Genetic Algorithms (NSGA-II), is proposed. The objective is to optimize the parameters of the two control laws of the semi-active suspension systems, in order to improve the ride comfort and the safety. To study the effectiveness of this approach, the results of the optimization are used in different simulations and the results are compared with those obtained from a simulation of a two-wheeled vehicle equipped with a passive suspension system. The results show that both control strategies of the semi-active suspension system give an improvement compared to the passive suspension system. Moreover, the multi-objective optimization results show that the simplified law “Modified Skyhook” ensures a higher ride safety, whereas the “Continuous Skyhook” is more effective in obtaining a higher level of ride comfort.

Sign in / Sign up

Export Citation Format

Share Document