scholarly journals IMPROVING OF THE UNMANNED AERIAL VEHICLES GROUP CONTROL SYSTEM

2015 ◽  
Vol 0 (6) ◽  
pp. 101
Author(s):  
T. Yu. Morozova ◽  
I. A. Ivanova ◽  
V. V. Nikonov ◽  
A. A. Grishin
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Aerial Vehicles ◽  
Group Control

scholarly journals Virtual Electric Dipole Field Applied to Autonomous Formation Flight Control of Unmanned Aerial Vehicles

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4540
Author(s):  
Leszek Ambroziak ◽  
Maciej Ciężkowski
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Flight Control ◽  
Electric Dipole ◽  
Potential Field ◽  
Control Algorithm ◽  
Formation Flight ◽  
Potential Fields ◽  
Dipole Potential ◽  
Aerial Vehicles

The following paper presents a method for the use of a virtual electric dipole potential field to control a leader-follower formation of autonomous Unmanned Aerial Vehicles (UAVs). The proposed control algorithm uses a virtual electric dipole potential field to determine the desired heading for a UAV follower. This method’s greatest advantage is the ability to rapidly change the potential field function depending on the position of the independent leader. Another advantage is that it ensures formation flight safety regardless of the positions of the initial leader or follower. Moreover, it is also possible to generate additional potential fields which guarantee obstacle and vehicle collision avoidance. The considered control system can easily be adapted to vehicles with different dynamics without the need to retune heading control channel gains and parameters. The paper closely describes and presents in detail the synthesis of the control algorithm based on vector fields obtained using scalar virtual electric dipole potential fields. The proposed control system was tested and its operation was verified through simulations. Generated potential fields as well as leader-follower flight parameters have been presented and thoroughly discussed within the paper. The obtained research results validate the effectiveness of this formation flight control method as well as prove that the described algorithm improves flight formation organization and helps ensure collision-free conditions.

Modeling and control of a quadrotor tail-sitter unmanned aerial vehicles

2021 ◽  
pp. 095965182110504
Author(s):  
Hongbo Xin ◽  
Yujie Wang ◽  
Xianzhong Gao ◽  
Qingyang Chen ◽  
Bingjie Zhu ◽  
...  
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Unmanned Aerial Vehicle ◽  
Euler Angle ◽  
Level Flight ◽  
Aerial Vehicles ◽  
Flight Mode ◽  
Aerial Vehicle ◽  
Hover Flight ◽  
And Control

The tail-sitter unmanned aerial vehicles have the advantages of multi-rotors and fixed-wing aircrafts, such as vertical takeoff and landing, long endurance and high-speed cruise. These make the tail-sitter unmanned aerial vehicle capable for special tasks in complex environments. In this article, we present the modeling and the control system design for a quadrotor tail-sitter unmanned aerial vehicle whose main structure consists of a traditional quadrotor with four wings fixed on the four rotor arms. The key point of the control system is the transition process between hover flight mode and level flight mode. However, the normal Euler angle representation cannot tackle both of the hover and level flight modes because of the singularity when pitch angle tends to [Formula: see text]. The dual-Euler method using two Euler-angle representations in two body-fixed coordinate frames is presented to couple with this problem, which gives continuous attitude representation throughout the whole flight envelope. The control system is divided into hover and level controllers to adapt to the two different flight modes. The nonlinear dynamic inverse method is employed to realize fuselage rotation and attitude stabilization. In guidance control, the vector field method is used in level flight guidance logic, and the quadrotor guidance method is used in hover flight mode. The framework of the whole system is established by MATLAB and Simulink, and the effectiveness of the guidance and control algorithms are verified by simulation. Finally, the flight test of the prototype shows the feasibility of the whole system.

scholarly journals Design and Fabrication of Voice Controlled Unmanned Aerial Vehicle

2016 ◽  
Vol 5 (3) ◽  
pp. 205
Author(s):  
S. Sakthi Anand ◽  
R. Mathiyazaghan
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Unmanned Aerial Vehicle ◽  
Voice Recognition ◽  
Search And Rescue ◽  
Voice Input ◽  
Recognition Process ◽  
Aerial Vehicles ◽  
Aerial Vehicle ◽  
The Voice

<p class="Default">Unmanned Aerial Vehicles have gained well known attention in recent years for a numerous applications such as military, civilian surveillance operations as well as search and rescue missions. The UAVs are not controlled by professional pilots and users have less aviation experience. Therefore it seems to be purposeful to simplify the process of aircraft controlling. The objective is to design, fabricate and implement an unmanned aerial vehicle which is controlled by means of voice recognition. In the proposed system, voice commands are given to the quadcopter to control it autonomously. This system is navigated by the voice input. The control system responds to the voice input by voice recognition process and corresponding algorithms make the motors to run at specified speeds which controls the direction of the quadcopter.</p>

Flight Control System Onboard Embedded Software for Small Unmanned Aerial Vehicles

2010 ◽  
Vol 20-23 ◽  
pp. 1528-1533
Author(s):  
Jin Jun Rao ◽  
Tong Yue Gao ◽  
Zhen Jiang ◽  
Zhen Bang Gong
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Flight Control ◽  
Genetic Architecture ◽  
Flight Control System ◽  
Aerial Vehicles ◽  
Operation Procedure ◽  
Function Modules ◽  
Task Processing ◽  
And Function

The onboard software of the flight control system (FCS) plays important role for small unmanned aerial vehicles’ performance. In this paper, the characteristics difficulties of the FCS software are analyzed firstly, then the compositions of the software are introduced using HIPO method. A genetic architecture of onboard software is presented to coordinate and organize the software and function modules, and an unique task scheduling strategy is designed and applied to realize multi-task processing. Finally, on the basis of the elementary operation procedure of the software, the flight experiment is implemented, and the feasibility and reliability of the onboard software is validated.

Sign in / Sign up

Export Citation Format

Share Document