scholarly journals Implementation of Height Measurement System Based on Pressure Sensor BMP085

2017 ◽  
Author(s):  
Gao-ping LIU ◽  
Wang-ming ZHANG ◽  
Huan-huan TIE
Keyword(s):  
Measurement System ◽  
Pressure Sensor ◽  
Height Measurement

Measurement and Calibration of the Displacement and Pressure in Automatic Wheelset Assembly Machine

2012 ◽  
Vol 184-185 ◽  
pp. 296-300
Author(s):  
Jun Xiao ◽  
Rong Fang ◽  
Xin Cheng ◽  
Jian Bin Han
Keyword(s):  
Error Analysis ◽  
Measurement System ◽  
Curve Fitting ◽  
Pressure Sensor ◽  
Displacement Measurement ◽  
Zero Drift ◽  
Measurement Systems ◽  
System Pressure

This paper introduces the measurement systems of the oil cylinder in automatic wheelset assembly machine, theoretically analyzes the error of the displacement measurement system by curve fitting, and gets verification the error analysis in practice. This paper also calibrates pressure sensor from zero drift, slope of the output of the pressure sensor to guarantee the system pressure, and compensated pressure sensor value consistent.

A Height Measurement Based on Laser Triangulation Probe and a Two Dimensional Image Measurement System for Smart Manufacturing

2015 ◽  
Vol 764-765 ◽  
pp. 1324-1328
Author(s):  
Pen Han Chen ◽  
Chien Hung Liu ◽  
Yu Fen Chen ◽  
Hung Sheng Chiu ◽  
Yu Chi Liu
Keyword(s):  
Measurement System ◽  
Smart Manufacturing ◽  
Measuring Error ◽  
Laser Triangulation ◽  
Two Dimensional ◽  
Image Measurement ◽  
Height Measurement ◽  
Dimensional Image ◽  
Two Dimensional Image ◽  
Auto Focusing

This paper integrated a laser triangulation probe with a two-dimensional image measurement system to measure the height of an object using the auto-focusing method. In the laser triangulation probe, the laser diode was used as the light source and one-dimensional position sensitive detector was adopted to receive the position of the laser spots to detect the height. The laser triangulation probe was used for small height measurement and the auto-focusing method was used for large height measurement. Two standard gauges with thicknesses of 8mm and 8.5mm were used to verify our proposed method. With height difference of 500μm, the experiment results showed the measuring error was within ±3μm and standard deviation was about 0.1μm.

Peak Height Measurement System for Pulsed Laser Experiments

1973 ◽  
Vol 44 (8) ◽  
pp. 978-981 ◽  
Author(s):  
Robert L. Swofford ◽  
W. M. McClain
Keyword(s):  
Measurement System ◽  
Pulsed Laser ◽  
Peak Height ◽  
Height Measurement ◽  
Laser Experiments

scholarly journals Optical in-process height measurement system for process control of laser metal-wire deposition

2020 ◽  
Vol 62 ◽  
pp. 23-29 ◽  
Author(s):  
Shigeru Takushima ◽  
Daiji Morita ◽  
Nobuhiro Shinohara ◽  
Hiroyuki Kawano ◽  
Yasuhiro Mizutani ◽  
...  
Keyword(s):  
Process Control ◽  
Measurement System ◽  
Metal Wire ◽  
Height Measurement

scholarly journals Design of automatic measurement system for pre-tightening parameters of multi-axis wrist force pressure sensor

2020 ◽  
Vol 24 (3 Part A) ◽  
pp. 1521-1528
Author(s):  
Zhihao Xu ◽  
Yizhen Lin ◽  
Qingjun Zhang ◽  
Nanzhe Ding ◽  
Xiaobai Zhang
Keyword(s):  
Measurement System ◽  
Pressure Sensor ◽  
Force Sensor ◽  
Parameter Measurement ◽  
Constant Current ◽  
Source Power ◽  
Data Collector ◽  
Sensor Module ◽  
Upper Computer ◽  
Force Pressure

Aiming at the shortcomings of low efficiency and poor accuracy of the existing pressure sensor pre-tightening parameter measurement system, an automatic multi-axis wrist force sensor pre-tightening parameter measurement system is designed. The multi-axis wrist force sensor module is used to collect real-time tension signal from the loaded hand wheel. After amplification, the signal is transmitted to the multi-channel gating module through RS485 communication module to realize the tested sensing. After fast switching and constant current source power supply control function, the data collector collects the pull signal obtained by multi-axis wrist force pressure sensor and transmits it to the upper computer of the system designed by LabVIEW through RS485 bus. The upper computer controls and collects the pressure sensor according to the pull signal feedback from the data collector, and the pre-tightening displacement of multi-axis wrist force sensor is determined by parameters such as axial displacement and friction resistance moment. The experimental results show that the designed system can fully measure the pre-tightening parameters of the sensor, and the starting moment measurement error is only 0.102%. The system can meet the requirements of batch measurement and calibration of multi-axis wrist force sensor with accuracy of 1%-0.1%.

Sign in / Sign up

Export Citation Format

Share Document