Numerical analysis of the torsion problem using nonconforming finite elements

2018 ◽  
Vol 12 (1) ◽  
pp. 47-55
Author(s):  
A. Garanza ◽  
M. Gawlik ◽  
F.T. Suttmeier
2010 ◽  
Vol 3 (3) ◽  
pp. 346-356 ◽  
Author(s):  
G. Savaris ◽  
P. H. Hallak ◽  
P. C. A. Maia

The objective of this article is to present the results obtained in a study on the interaction between the behavior of the structure and the foundation settlements and verify the influence of normal load distribution on the columns. In this mechanism, known as structure soil interaction (SSI), as the building is constructed, a transfer of loads occurs from the columns which tend to settle more to those that tend to settle less. The study was conducted in a building which had its settlements monitored from the beginning of construction. For this purpose, a linear tridimensional numerical model was constructed and numerical analysis was performed, using the finite elements method. In these analyses, numerical models corre- sponding to the execution of each floor were used, considering the settlements measured in each stage of the construction. The results of analy- ses showed that the effect of SSI are significant for calculating the normal efforts on the columns, particularly on those located in the first floors.


2019 ◽  
Vol 21 (2) ◽  
pp. 1-5
Author(s):  
Marcin Nabrdalik ◽  
Michał Sobociński

Abstract The paper presents analysis of stress distribution in the friction node of knee joint endoprosthesis where sleds are made of various titanium alloys and CoCrMo cooperate with spherical polyethylene inserts. Currently used titanium alloys consists of Nb, Ta, Zr or Mo and with lesser value of Young’s modulus than Ti6Al4V alloy, or steel CoCrMo, which significantly varies from other metal materials. The obtained results make it possible to indicate the “weak points” of the accepted solution, and thus counteract the subsequent effects resulting from premature wear of endoprosthesis elements. The analysis was conducted with numerical method of ADINA System 8.6. The Finite Elements Method allowed to compute and present stress distribution quickly in all elements of the model.


Sign in / Sign up

Export Citation Format

Share Document