Design optimization of the mixing chamber in SCR system for marine diesel engine(Diesel Engines, Performance and Emissions, NOx Strategies)

2004 ◽  
Vol 2004.6 (0) ◽  
pp. 87-92 ◽  
Author(s):  
Tae Young Oh ◽  
Joon Ho Ko ◽  
Hee Je Seong ◽  
Byeong Su Min
Keyword(s):  
Diesel Engine ◽  
Design Optimization ◽  
Diesel Engines ◽  
Marine Diesel Engine ◽  
Mixing Chamber ◽  
Performance And Emissions ◽  
Marine Diesel ◽  
Scr System

Developmetnt of New SCR System for Marine Diesel Engine

2002 ◽  
Vol 2002.4 (0) ◽  
pp. 113-114
Author(s):  
Katsunori YOGO ◽  
Masamichi ISHIKAWA ◽  
Kenji OOE ◽  
Tatsuro TSUKAMOTO
Keyword(s):  
Diesel Engine ◽  
Marine Diesel Engine ◽  
Marine Diesel ◽  
Scr System

Computer aided study of the transient performances of a highly rated sequentially turbocharged marine diesel engine

1998 ◽  
Vol 212 (3) ◽  
pp. 185-196 ◽  
Author(s):  
X Tauzia ◽  
J F Hetet ◽  
P Chesse ◽  
G Crosshans ◽  
L Mouillard
Keyword(s):  
Experimental Data ◽  
Diesel Engine ◽  
Diesel Engines ◽  
Marine Diesel Engine ◽  
Computer Aided ◽  
Compressor Surge ◽  
Marine Diesel ◽  
Valve Opening ◽  
Transient Phases ◽  
Good Agreement

The sequential turbocharging technique described in this paper leads to an improvement in the operations of highly rated diesel engines, in particular at part loads (better air admission). However, transient phases such as a switch from one turbocharger to two turbochargers can be difficult, mainly because of the inertia of the turbochargers. In order to simulate the dynamics of turbocharged diesel engines, the SELENDIA software has been extended. When applied to two different engines (12 and 16 cylinders), the program shows good agreement with the experimental data. Moreover, the compressor surge has been investigated during faulty switch processes. The software has then been used for predictive studies to evaluate the possibility of adapting sequential turbocharging to a 20-cylinder engine and to calibrate the optimum switching conditions (air and gas valve opening timing).

scholarly journals Energy Efficiency and Environmental Analysis of the Green-Hydrogen Fueled Slow Speed Marine Diesel Engine

2018 ◽  
Vol 6 (6) ◽  
Author(s):  
Nader R. Ammar
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Catalytic Reduction ◽  
Energy Content ◽  
Hydrogen Energy ◽  
Marine Diesel Engine ◽  
Slow Speed ◽  
Marine Diesel ◽  
Hydrogen Substitution ◽  
Scr System

Marine diesel engines are facing challenges to cope with the emission-reduction regulations set by the international maritime organization (IMO). Hydrogen fuel is one of the alternative fuels which can be used to reduce the exhaust gas emissions from ships. The current paper investigates the effect of using diesel-hydrogen dual fuels on the environmental, energetic and exergetic performance parameters of slow speed marine diesel engine. The investigation is performed using Engineering Equation Solver (EES) software package. As a case study, slow speed diesel engine has been investigated. The results obtained revealed that the energetic and exergetic parameters are influenced by engine load and hydrogen substitution percent. The exergy efficiency is increased by 3.65%, 8.20%, 13.99%, and 21.7% for the hydrogen substitution percentages of 10%, 20%, 30%, and 40%, respectively compared with the diesel engine at full load. Environmentally, CO and CO2 emissions are reduced and NOx emissions are increased as the hydrogen energy content increases. Dual fuel engine with input hydrogen energy fractions of 10% and 20% will comply with the required NOx emission regulations set by IMO after using selective catalytic reduction (SCR) system. It will comply with the required regulations with relative percentages of 96.4% and 98.4%, respectively.

scholarly journals Computational and experimental determination of flame radiation parameters in the combustion chamber of a marine diesel engine

2020 ◽  
pp. 98-102
Author(s):  
Б.И. Руднев ◽  
О.В. Повалихина
Keyword(s):  
Experimental Data ◽  
Diesel Engine ◽  
Combustion Chamber ◽  
Experimental Method ◽  
Diesel Engines ◽  
Flame Temperature ◽  
Marine Diesel Engine ◽  
Gas Temperature ◽  
Flame Radiation ◽  
Marine Diesel

Температура пламени и степень черноты определяют его собственное излучение. Однако оценка указанных параметров на стадии проектирования судовых дизелей представляет собой трудную и еще пока нерешенную проблему. Последнее обусловливается сложностью достоверного математического моделирования процесса сгорания топлива в дизельных двигателях и весьма высокой стоимостью экспериментальных исследований в этой области. Целью данной статьи является разработка расчетно-экспериментального метода определения параметров излучения пламени в камере сгорания судового дизеля 6 ЧН 24/36. Показано, что оценка величины температуры пламени в камере сгорания в функции угла поворота коленчатого вала может быть выполнена по температуре газов, найденной из экспериментальной или расчетной индикаторной диаграммы и специального параметра. Последний определяется на основании зависимости, полученной путем обобщения экспериментальных данных по измерениям температуры пламени на ряде дизельных двигателей. Представлены результаты по температуре пламени для судового дизеля 6 ЧН 24/36, полученные с использованием разработанного расчетно-экспериментального метода. Установлено, что с ростом нагрузки температура пламени возрастает. При этом в диапазоне изменения нагрузки дизеля от 50% до 100% от номинальной мощности увеличение температуры пламени примерно в два раза превышает увеличение температуры газов. Использование полученных результатов для оценки собственных потоков излучения пламени в камере сгорания судового дизеля 6 ЧН 24/36 и сопоставление их с известными экспериментальными данными показало сходимость в пределах 10 – 15%. The flame temperature and radiating power are determined with its own radiation. However, the assessment of these parameters at the design stage of marine diesel engines is a complicated and still unsolved problem. The latter is due to the complexity of reliable mathematical modeling of the fuel combustion process in diesel engines and the very high cost of experimental research in this area. The purpose of this article is to develop a computational and experimental method for determining the parameters of flame radiation in the combustion chamber of marine diesel engine 6 ChN 24/36. It is shown that the estimation of the value of flame temperature in the combustion chamber as a function of the crankshaft rotation angle can be performed using the gas temperature found from the experimental or calculated indicator diagram and a special parameter. The latter is determined on the basis of the dependence obtained by generalizing experimental data of the flame temperature measurements at a number of diesel engines. The results on the flame temperature for marine diesel engine 6 ChN 24/36, obtained using the developed computational and experimental method, are presented. It has been found that the flame temperature increases with increasing load. At the same time, in the range of diesel load variation from 50% to 100% of the nominal power, an increase in the flame temperature is approximately twice more than an increase in the gas temperature. The use of the results obtained to assess the intrinsic fluxes of flame radiation in the combustion chamber of marine diesel engine 6 ChN 24/36 and their comparison with the known experimental data showed the convergence within 10 - 15%.

An Experimental Study on Fuel Economy Improvement of a Marine Diesel Engine Using a Sequential Turbocharging System

2018 ◽  
Author(s):  
Hechun Wang ◽  
Xiannan Li ◽  
Yinyan Wang ◽  
Hailin Li
Keyword(s):  
Diesel Engine ◽  
Fuel Economy ◽  
Diesel Engines ◽  
Engine Speed ◽  
Single Stage ◽  
Marine Diesel Engine ◽  
Nox Emissions ◽  
Engine Operation ◽  
Marine Diesel ◽  
High Torque

Marine diesel engines usually operate on a highly boosted intake pressure. The reciprocating feature of diesel engines and the continuous flow operation characteristics of the turbocharger (TC) make the matching between the turbocharger and diesel engine very challenging. Sequential turbocharging (STC) technology is recognized as an effective approach in improving the fuel economy and exhaust emissions especially at low speed and high torque when a single stage turbocharger is not able to boost the intake air to the pressure needed. The application of STC technology also extends engine operation toward a wider range than that using a single-stage turbocharger. This research experimentally investigated the potential of a STC system in improving the performance of a TBD234V12 model marine diesel engine originally designed to operate on a single-stage turbocharger. The STC system examined consisted of a small (S) turbocharger and a large (L) turbocharger which were installed in parallel. Such a system can operate on three boosting modes noted as 1TC-S, 1TC-L and 2TC. A rule-based control algorithm was developed to smoothly switch the STC operation mode using engine speed and load as references. The potential of the STC system in improving the performance of this engine was experimentally examined over a wide range of engine speed and load. When operated at the standard propeller propulsion cycle, the application of the STC system reduced the brake specific fuel consumption (BSFC) by 3.12% averagely. The average of the exhaust temperature before turbine was decreased by 50°C. The soot and oxides of nitrogen (NOx) emissions were reduced respectively. The examination of the engine performance over an entire engine speed and torque range demonstrated the super performance of the STC system in extending the engine operation toward the high torque at low speed (900 to 1200 RPM) while further improving the fuel economy as expected. The engine maximum torque at 900 rpm was increased from 1680Nm to 2361 Nm (40.5%). The average BSFC over entire working area was improved by 7.4%. The BSFC at low load and high torque was significantly decreased. The application of the STC system also decreased the average NOx emissions by 31.5% when examined on the propeller propulsion cycle.

scholarly journals Study on Optimization Simulation of Scr Denitration System for Marine Diesel Engine

2018 ◽  
Vol 25 (s3) ◽  
pp. 13-21
Author(s):  
Jun Du ◽  
Ruo Nan Li ◽  
Xin Wu ◽  
Yan Zhang
Keyword(s):  
Diesel Engine ◽  
Gas Flow ◽  
Rapid Development ◽  
Marine Diesel Engine ◽  
Engine Exhaust ◽  
Shipbuilding Industry ◽  
Optimization Simulation ◽  
Marine Diesel ◽  
System Selection ◽  
Scr System

Abstract With the rapid development of shipbuilding industry exhaust world is also very harmful one kind of environmental issues, and the ship marine diesel engine exhaust gas is mainly produced, so in recent years it has developed a diesel engine SCR system. SCR system can control emissions of nitrogen oxides in the exhaust of vessel, furthermore air pollution can be reduced. The main goal of article was using fluent software to correct SCR system selection and flue gas flow under different size best deflector arrangement is simulated. Next goal is further optimize the structure of the SCR system.

Sign in / Sign up

Export Citation Format

Share Document