An Advanced Fuel Laser Fusion and Volume Compression ofp-11B Laser-Driven Targets

1991 ◽  
Vol 19 (1) ◽  
pp. 43-51 ◽  
Author(s):  
George H. Miley ◽  
Heinrich Hora ◽  
Lorenzo Cicchitelli ◽  
Gregorios V. Kasotakis ◽  
Robert J. Stening
1987 ◽  
Vol 42 (10) ◽  
pp. 1239-1240a ◽  
Author(s):  
Heinrich Hora

Since C. Yamanaka et al. demonstrated that the best fusion gains from laser irradiated pellets result only when central shocks are avoided and an ideal volume compression is achieved, the problems o f the central (spark) ignition with necessary densities of 1000 times the solid state may be overcome. Based on an analytical formula of volume ignition, the new conditions should provide reactor adequate laser fusion with compression to 50 to 100 times solid state.


1998 ◽  
Vol 60 (4) ◽  
pp. 743-760 ◽  
Author(s):  
HEINRICH HORA ◽  
H. AZECHI ◽  
Y. KITAGAWA ◽  
K. MIMA ◽  
M. MURAKAMI ◽  
...  

The recent high core gains of 29% in laser fusion experiments at the LLE Rochester are evaluated and compared with related earlier measurements where surprisingly the self-similarity model for volume compression provides a common description. This is a proof that the isentropic conditions of stagnation-free compression were mostly fulfilled at the optimized experimental gains, in contrast to highly entropy-producing shock and central spark conditions. Some projections are given of how these results may be generalized to volume ignition for the parameters of the NIF (National Ignition Facility). The proof of stagnation-free volume compression for the best laser fusion gains indicates the advantages of volume ignition, which not only is ‘robust’ and simply follows the natural adiabatic compression, but also is much less sensitive to instabilities and mixing. However, its essential advantage is that it is free from symmetry problems – in contrast to spark ignition, with its spherical detonation front.


1978 ◽  
Vol 6 (2) ◽  
pp. 192-199 ◽  
Author(s):  
Hiroaki NISHIMURA ◽  
Akio TAMURA ◽  
Yuji YANASE ◽  
Nagatoshi BANJOYA ◽  
Sadao NAKAI ◽  
...  
Keyword(s):  

1981 ◽  
Author(s):  
V. W. Slivinsky
Keyword(s):  

Author(s):  
Juan Manuel Restrepo-Flórez ◽  
Christos T. Maravelias

Advanced fuel design through integration of chemistries leading to different components: alcohols (blue); ethers (green); and olefins, parafins, and aromatics (yellow).


Author(s):  
Rizwan Raza ◽  
Ghazanfar Abbas ◽  
S. Khalid Imran ◽  
Imran Patel ◽  
Bin Zhu

Oxide based two phase composite electrolyte (Ce0.9Gd0.1O2–Y2O3) was synthesized by coprecipitation method. The nanocomposite electrolyte showed the significant performance of power density 785 mW cm−2 and higher conductivities at relatively low temperature 550°C. Ionic conductivities were measured with ac impedance spectroscopy and four-probe dc method. The structural and morphological properties of the prepared electrolyte were investigated by scanning electron microscope (SEM). The thermal stability was determined with differential scanning calorimetry. The particle size that was calculated with Scherrer formula, 15–20 nm, is in a good agreement with the SEM and X- ray diffraction results. The purpose of this study is to introduce the functional nanocomposite materials for advanced fuel cell technology to meet the challenges of solid oxide fuel cell.


Physics World ◽  
2012 ◽  
Vol 25 (04) ◽  
pp. 6-6
Author(s):  
Simon Perks
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document