GDC - Y 2 O 3 Oxide Based Two Phase Nanocomposite Electrolyte

2011 ◽  
Vol 8 (4) ◽  
Author(s):  
Rizwan Raza ◽  
Ghazanfar Abbas ◽  
S. Khalid Imran ◽  
Imran Patel ◽  
Bin Zhu
Keyword(s):  
Fuel Cell ◽  
Ionic Conductivities ◽  
Morphological Properties ◽  
Scanning Calorimetry ◽  
Two Phase ◽  
Composite Electrolyte ◽  
Significant Performance ◽  
Advanced Fuel ◽  
Nanocomposite Electrolyte ◽  
Scherrer Formula

Oxide based two phase composite electrolyte (Ce0.9Gd0.1O2–Y2O3) was synthesized by coprecipitation method. The nanocomposite electrolyte showed the significant performance of power density 785 mW cm−2 and higher conductivities at relatively low temperature 550°C. Ionic conductivities were measured with ac impedance spectroscopy and four-probe dc method. The structural and morphological properties of the prepared electrolyte were investigated by scanning electron microscope (SEM). The thermal stability was determined with differential scanning calorimetry. The particle size that was calculated with Scherrer formula, 15–20 nm, is in a good agreement with the SEM and X- ray diffraction results. The purpose of this study is to introduce the functional nanocomposite materials for advanced fuel cell technology to meet the challenges of solid oxide fuel cell.

GDC-Y2O3 Oxide Based Two Phase Nanocomposite Electrolytes

2010 ◽  
Author(s):  
Rizwan Raza ◽  
Ghazanfar Abbas ◽  
Bin Zhu
Keyword(s):  
Fuel Cell ◽  
Electrochemical Impedance ◽  
Ionic Conductivities ◽  
Morphological Properties ◽  
Precipitation Method ◽  
Scanning Calorimetry ◽  
Two Phase ◽  
Nanocomposite Electrolyte ◽  
Scherrer Formula ◽  
Co Precipitation

An oxide based two phase nanocomposite electrolyte (Ce0.9Gd0.1O2) was synthesized by a co-precipitation method and coated with Yttrium oxide (Y2O3). The nanocomposite electrolyte showed the significant performance of power density 750mW/cm2 and higher conductivities at relatively low temperature 550°C. Ionic conductivities were measured with electrochemical impedance spectroscopy (EIS) and DC (4 probe method). The structural and morphological properties of the prepared electrolyte were investigated by means of High Resolution Scanning Electron Microscopy (HRSEM). The thermal stability was determined with Differential Scanning Calorimetry (DSC). The particle size was calculated with Scherrer formula and compare with SEM results, 15–20 nm is in a good agreement with the SEM and X-ray diffraction (XRD) results. The purpose of the study to introduce the functional nanocomposite materials, for advanced fuel cell technology (NANOCOFC) to meet the challenges of solid oxide fuel cell (SOFC).

scholarly journals Different approaches to obtain functionalized alumina as additive in polymer electrolyte membranes

2021 ◽  
Author(s):  
Lucia Mazzapioda ◽  
Mirko Sgambetterra ◽  
Akiko Tsurumaki ◽  
Maria Assunta Navarra
Keyword(s):  
Fuel Cell ◽  
Aluminum Oxide ◽  
Thermal Analyses ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Composite Electrolyte ◽  
Fuel Cell Performance ◽  
Operation Temperature ◽  
Electrolyte Membranes

AbstractA series of sulfated aluminum oxides (S-Al2O3), investigated as an electrolyte additive in Nafion membranes, was synthesized via three different methods: (i) sol–gel sulfation starting from an aluminum alkoxide precursor, (ii) room temperature sulfation of fumed aluminum oxide, and (iii) hydrothermal sulfation of fumed aluminum oxide. Through the characterization of the synthesized S-Al2O3 by means of X-ray diffraction (XRD), thermogravimetric analysis (TGA), and infrared (IR) spectroscopy, a higher sulfation rate was found to be achieved via a hydrothermal sulfation, and the coordination state of sulfate groups was identified as monodentate. By using this hydrothermally synthesized S-Al2O3 as additive, a composite Nafion-based membrane was realized and compared to plain Nafion, by means of thermal analyses and fuel cell tests. Although higher hydration degree was found for the undoped membrane by differential scanning calorimetry (DSC), improved retention of fuel cell performance upon the increase of operation temperature was observed by using the composite electrolyte, confirming the stabilizing effect of the acidic inorganic additive.

Analysis and Modeling of Novel Low-Temperature SOFC With a Co-Ionic Conducting Ceria-Based Composite Electrolyte

2009 ◽  
Vol 7 (1) ◽  
Author(s):  
Jianbing Huang ◽  
Jinliang Yuan ◽  
Zongqiang Mao ◽  
Bengt Sundén
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Low Temperature ◽  
Ionic Conductivities ◽  
Doped Ceria ◽  
Operating Characteristics ◽  
Composite Electrolyte ◽  
Ionic Conducting ◽  
Ion Proton ◽  
Oxide Ion

In recent years, ceria-based composites (CBCs) have been developed as electrolytes for low-temperature solid oxide fuel cells. These materials exhibit extremely high ionic conductivities at 400–600°C. It has also been found that both oxide ion and proton can be conducted in the CBC electrolytes, which makes such co-ionic conducting fuel cell distinct from any other types of fuel cells. In this study, a model involving three charge carriers (oxide ion, proton, and electron) is developed to describe the fuel cell with CBC electrolytes. Various operating characteristics of the fuel cell with CBC electrolytes are investigated, compared to those of the fuel cell with doped ceria electrolytes. The results indicate that the CBC electrolyte behaves as a pure ionic conductor, the cell is more efficient, and a higher output is expected at low temperatures under the same pressure operation than that of the cell with doped ceria electrolytes.

Injectable in-situ Forming Depot Of Doxycycline Hyclate/α-Cyclodextrin Complex using PLGA for Periodontitis Treatment: Preparation, Charac-terization, and In-Vitro Evaluation

2020 ◽  
Vol 17 ◽  
Author(s):  
Elham Khodaverdi ◽  
Farhad Eisvand ◽  
Mohammad Sina Nezami ◽  
Seyedeh Nesa Rezaeian Shiadeh ◽  
Hossein Kamali ◽  
...  
Keyword(s):  
Complex Form ◽  
Docking Studies ◽  
Morphological Properties ◽  
Burst Release ◽  
Cyclodextrin Complex ◽  
Doxycycline Hyclate ◽  
Scanning Calorimetry ◽  
In Situ Forming

Background:: Doxycycline (DOX) is used in treating a bacterial infection, especially for periodontitis treatment. Objective: To reduce irritation of DOX for subgingival administration and increase the chemical stability and against enzy-matic, the complex of α-cyclodextrin with DOX was prepared and loaded into injectable in situ forming implant based on PLGA. Methods:: FTIR, molecular docking studies, X-ray diffraction, and differential scanning calorimetry was performed to char-acterize the DOX/α-cyclodextrin complex. Finally, the in-vitro drug release and modeling, morphological properties, and cellular cytotoxic effects were also evaluated. Results:: The stability of DOX was improved with complex than pure DOX. The main advantage of the complex is the al-most complete release (96.31 ± 2.56 %) of the drug within 14 days of the implant, whereas in the formulation containing the pure DOX and the physical mixture the DOX with α-cyclodextrin release is reached to 70.18 ± 3.61 % and 77.03 ± 3.56 %, respectively. This trend is due to elevate of DOX stability in the DOX/ α-cyclodextrin complex form within PLGA implant that confirmed by the results of stability. Conclusion:: Our results were indicative that the formulation containing DOX/α-cyclodextrin complex was biocompatible and sustained-release with minimum initial burst release.

Characterization of Nostoc muscorum NCCU-442 Derived Poly-3- hydroxybutyrate (PHB) and Polyethylene Glycol (PEG) Blends

2020 ◽  
Vol 10 (3) ◽  
pp. 200-207
Author(s):  
Sabbir Ansari ◽  
Tasneem Fatma
Keyword(s):  
Thermal Properties ◽  
Polyethylene Glycol ◽  
Morphological Properties ◽  
Morphological Alteration ◽  
Nostoc Muscorum ◽  
Microbial Culture ◽  
Polymer Science ◽  
Mixed Microbial Culture ◽  
Scanning Calorimetry ◽  
Casting Technique

Background: Poly-3-hydroxybutyrate (PHB) has attracted much consideration as biodegradable biocompatible polymer. This thermoplastic polymer has comparable material properties to polypropylene. Materials with more valuable properties may result from blending, a common practice in polymer science. Objective: In this paper, blends of PHB (extracted from cyanobacterium Nostoc muscorum NCCU- 442 with polyethylene glycol (PEG) were investigated for their thermal, tensile, hydrophilic and biodegradation properties. Methods: Blends were prepared in different proportions of PHB/PEG viz. 100/0, 98/2, 95/5, 90/10, 80/20, and 70/30 (wt %) using solvent casting technique. Morphological properties were investigated by using Scanning Electron Microscopy (SEM). Differential scanning calorimetry and thermogravimetric analysis were done for thermal properties determination whereas the mechanical and hydrophilic properties of the blends were studied by means of an automated material testing system and contact angle analyser respectively. Biodegradability potential of the blended films was tested as percent weight loss by mixed microbial culture within 60 days. Results: The blends showed good misciblity between PEG and PHB, however increasing concentrations of plasticizer caused morphological alteration as evidenced by SEM micrographs. PEG addition (10 % and above) showed significant alternations in the thermal properties of the blends. Increase in the PEG content increased the elongation at break ratio i.e enhanced the required plasticity of PHB. Rate of microbial facilitated degradation of the blends was greater with increasing PEG concentrations. Conclusion: Blending with PEG increased the crucial polymeric properties of cyanobacterial PHB.

A prospective study of anti-vibration mechanism of microfluidic fuel cell via novel two-phase flow model

Energy ◽  
2021 ◽  
Vol 218 ◽  
pp. 119543
Author(s):  
Jingxian Chen ◽  
Peihang Xu ◽  
Jie Lu ◽  
Tiancheng Ouyang ◽  
Chunlan Mo
Keyword(s):  
Fuel Cell ◽  
Prospective Study ◽  
Flow Model ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Two Phase ◽  
Vibration Mechanism ◽  
Microfluidic Fuel Cell ◽  
A Prospective Study

scholarly journals Structural, thermal and electrical properties of composites electrolytes (1−x) CsH2PO4/x ZrO2 (0 ≤ x ≤ 0.4) for fuel cell with advanced electrode

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Deshraj Singh ◽  
Pawan Kumar ◽  
Jitendra Singh ◽  
Dharm Veer ◽  
Aravind Kumar ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Solid Acid ◽  
Thermal Characterization ◽  
Dihydrogen Phosphate ◽  
Conducting Material ◽  
Scanning Calorimetry ◽  
Milling Method ◽  
Thermal And Electrical Properties ◽  
Properties Of Composites

AbstractComposites proton conducting material based on cesium dihydrogen phosphate (CDP) doped with zirconium oxide (1−x) CsH2PO4/x ZrO2 were synthesized with different concentration having in the range such as x = 0.1, 0.2, 0.3 and 0.4 by ball milling method. The prepared solid acid composites were dried at 150 °C for 6 h. Structural and thermal characterization of solid acid composite proton electrolytes were carried out by X-ray diffractometer, Fourier transform infrared spectroscopy, and Raman spectroscopy respectively. Phase transition of the prepared materials was carried out by using differential scanning calorimetry and conductivity was measured by LC Impedance meter in the range 1 Hz to 400 kHz. The ionic conductivity of ZrO2 doped CsH2PO4 (CDP) was increased up to 1.3 × 10–2 S cm−1 at the 280 °C under environment atmospheric humidification which showed high stability as compared to pure CsH2PO4 (CDP). This obtaining result would be useful for establishing and design the next generation fuel cell.

Synthesis and Evaluation of Cellulose-Based, 1,2,3-Triazolium-Functionalized Polymerized Ionic Liquids: Thermal Transitions, Ionic Conductivities, and Morphological Properties

2021 ◽  
Vol 3 (2) ◽  
pp. 1097-1106
Author(s):  
Rose J. Miller ◽  
Vanessa M. Smith ◽  
Stacy A. Love ◽  
Sarah M. Byron ◽  
David Salas-de la Cruz ◽  
...  
Keyword(s):  
Ionic Liquids ◽  
Ionic Conductivities ◽  
Morphological Properties ◽  
Thermal Transitions

scholarly journals Rheological, Thermal, Superficial, and Morphological Properties of Thermoplastic Achira Starch Modified with Lactic Acid and Oleic Acid

Molecules ◽  
2019 ◽  
Vol 24 (24) ◽  
pp. 4433 ◽  
Author(s):  
Carolina Caicedo ◽  
Rocío Yaneli Aguirre Loredo ◽  
Abril Fonseca García ◽  
Omar Hernán Ossa ◽  
Aldo Vázquez Arce ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Oleic Acid ◽  
Complex Viscosity ◽  
Thermoplastic Starch ◽  
Residual Energy ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Rheological Analysis ◽  
Acid Agent

The modification of achira starch a thermoplastic biopolymer is shown. Glycerol and sorbitol, common plasticizers, were used in the molten state with organic acids such as oleic acid and lactic acid obtaining thermodynamically more stable products. The proportion of starch:plasticizer was 70:30, and the acid agent was added in portions from 3%, 6%, and 9% by weight. These mixtures were obtained in a torque rheometer for 10 min at 130 °C. The lactic acid managed to efficiently promote the gelatinization process by increasing the available polar sites towards the surface of the material; as a result, there were lower values in the contact angle, these results were corroborated with the analysis performed by differential scanning calorimetry and X-ray diffraction. The results derived from oscillatory rheological analysis had a viscous behavior in the thermoplastic starch samples and with the presence of acids; this behavior favors the transitions from viscous to elastic. The mixture of sorbitol or glycerol with lactic acid promoted lower values of the loss module, the storage module, and the complex viscosity, which means lower residual energy in the transition of the viscous state to the elastic state; this allows the compounds to be scaled to conventional polymer transformation processes.

Sign in / Sign up

Export Citation Format

Share Document