scholarly journals Effects of Net Height Scale on Badminton Performance and Satisfaction among Children

2021 ◽  
Vol 9 (6) ◽  
pp. 1272-1283
Author(s):  
Henry Kota Pirak ◽  
Mohamad Nizam Nazarudin ◽  
Mohd Firdaus Abdullah
Keyword(s):  
Author(s):  
Han Wang ◽  
Yuquan Li

This paper presented the scaling evaluation of the two-phase natural circulation process between an assumed nuclear power plant and three test facilities with full pressure simulation and three different height scales, which were 1:2, 1:3 and 1:4. The Hierarchical Two-Tiered Scaling (H2TS) Methodology was adopted. By top-down scaling analysis, several characteristic time ratios were obtained, and then the calculation method of the scaling distortion were investigated. It has been found that the dominant processes in two-phase natural circulation can be well preserved no matter what the height scale is.


2018 ◽  
Vol 618 ◽  
pp. A60 ◽  
Author(s):  
M. Karlický ◽  
L. Yasnov

Aims. The zebra structures observed in radio waves during solar flares are some of the most important structures used as diagnostics of solar flare plasmas. We here not only analyze the so-called double plasma-resonance (DPR) surfaces, but also estimate the effects of their form on the size of the zebra sources and brightness temperature. Methods. To compute the DPR surfaces, we used numerical and analytical methods. Results. We found that except for the case of a constant magnetic field across the loop, the DPR surfaces deviate from the constant plasma density surfaces. We found that the regime with a finite height scale has three forms of resonance surfaces depending on the magnetic field variation across the loop. This magnetic field variation also determines if in the generated zebra structure, an increase in gyro-harmonic number leads to an increase or decrease of the zebra stripe frequency. In the case with an infinite height scale, the resonance surfaces are parallel to the loop axis. Furthermore, we found that for highly polarized zebra structures that are generated at DPR surfaces close to the plasma frequency, the zebra emission is limited to the narrow escaping cone and the emitting source area increases with increasing viewing angle compared to the loop axis. Moreover, with increasing deviation of the DPR surfaces from those of constant density surfaces, the frequency bandwidth of the DPR emission increases and can cause the zebra stripes to overlap, which limits the zebra generation. For the zebra structures observed on 14 February 1999, 6 June 2000, and 1 August 2010 and the observed view perpendicular to the loop axis, we estimated that the brightness temperature is 3.67 × 1014 K, 6.58 × 1013 K, and 7.35 × 1015 K, respectively. These brightness temperatures are much lower than those derived for the view along the loop axis (up to 1017 K), and thus are more realistic. The area of the emitting source for coronal loops in the view perpendicular to the loop axis can be larger by several orders of magnitude than that in the view along the loop axis.


2010 ◽  
Vol 720 (2) ◽  
pp. 1417-1431 ◽  
Author(s):  
K. G. Puschmann ◽  
B. Ruiz Cobo ◽  
V. Martínez Pillet
Keyword(s):  

2012 ◽  
Vol 174-177 ◽  
pp. 2657-2661
Author(s):  
Ying Hua Bao ◽  
Yu Nan Zhang ◽  
Lei Wang

The article aimed at the problems in the spatial scale occurred in the process of the fusion of elevated rail transit line and city space. Study on D/H for each spatial dimension of the overhead line and city space convergence. Use theoretical analysis methods from the perspective of characteristics and double scales. The results show that the elevated rail transit line height scale range for 6.5m-8m,the suitability D / H is between 2-3 for overhead line and road with typical street section, and space near the elevated line should be carried out in details in the elevation below 12m.


2013 ◽  
Vol 465-466 ◽  
pp. 1191-1195
Author(s):  
Mohd Shahir Yahya ◽  
Thiyagu Palaniandy ◽  
Noor Yasmin Zainun ◽  
Musli Mohammad

This paper explains the measurement of anthropometricdimensions ofprimary school children and investigation ofrisk factors associated with musculoskeletal disorders (MSDs) among primary school children. A total of 266 students within three different schools were participated in anthropometric data measurements and questionnaire survey of the MSDs prevelance complain among them. Ten anthropometric measurements (Stature, Sitting height, Sitting shoulder height, Popliteal height, Hip breadth, Elbow seat height, Buttock-popliteal length, Buttock-knee length, Thigh clearance and Weight) were used. Martin type anthropometer set, height scale and weighing scale were used as a direct measurement method for the data collection on this study. Musculoskeletal symptoms were recorded using Modified Nordic Body Map Questionnaires. In addition Rapid Upper Limb Assessment (RULA) was used to assess the awkward posture of the school children for both designs. The results of the proposed furniture shows a better RULA final score for each group of muscles which give a score ranging from only 1 to 2 (Acceptable Posture) compared to the existing furniture that need further investigation. This anthropometrics data is very useful to the furniture manufacturer in designing school furniture in order to reduce the mismatch between furniture designed and Malaysian primary school children.


2000 ◽  
Vol 403 ◽  
pp. 67-88 ◽  
Author(s):  
WENXIAN LIN ◽  
S. W. ARMFIELD

The weak axisymmetric fountain that results from the injection of a dense fluid upwards into a large container of homogeneous fluid of lower density is studied numerically. Using a time-accurate finite volume code, the behaviour of fountains with both a uniform and a parabolic profile of the discharge velocity at the source has been investigated. The evolution of the transient fountain flow has been analysed and two distinct stages have been identified. The time series of the passage of the fountain front has been presented and the initial, temporary and final characteristic fountain heights have been determined and scaled with the Froude number at the source. At steady state, the final fountain height and the fountain width are found to be the height and horizontal length scales which provide the full parameterization of the flow in the fountain core. The vertical velocity and temperature on the symmetry axis have been scaled with the height scale and an explicit correlation is also obtained for the former. The radial distributions of both the vertical and horizontal velocities in the zone of self-similarity in the fountain core at steady state have been scaled with the two length scales and empirical correlations have been obtained.


Author(s):  
Jia Zhong ◽  
Nan Wang ◽  
Yuquan Li ◽  
Yang Shi

The Advanced Core cooling Mechanism Experiment (ACME) facility is a 1/3 height scale, high pressure, 1/54.3 power scale and 1/94 volume scale simulation of CAP1400 PWR. A series of twenty-one small break loss of coolant accident (SBLOCA) tests were performed at ACME to collect thermal-hydraulic data for computer code assessment and to support the license of CAP1400. The tests included a range of hot-leg or cold-leg break, double ended direct vessel injection (DEDVI) line break, inadvertent ADS actuation and double ended pressure balance line (PBL) break accidents. The purpose of this paper is to describe the test data of the typical SBLOCA, and to analyze the mixing of liquid in Reactor Pressure Vessel (RPV) downcomer. Furthermore, the trend of RPV downcomer temperature and the temperature distribution in RPV downcomer are investigated.


Sign in / Sign up

Export Citation Format

Share Document