Improving the signal-to-noise ratio of the beat note between a frequency comb and a tunable laser using a dynamically tracking optical filter

In this paper, we propose an optical transmission system of 128 quadrature amplitude modulation for dense wavelength division multiplexing. In such a system, Gaussian optical filtering is used to get an appropriate photonic carrier. Theoretical analysis and simulation computation show that the modulated multi-carrier photonic signals with the wavelength spacing of 0.7 nm can transmit for over 80 km with the standard single mode fiber. Using digital signal processing algorithms to compensate the transmission impairments, the transmission rate of the single-carrier photonic signal can reach up to 904 Gbps and the spectral efficiency of the transmission can reach up to 10.33 bps/Hz. When this technology is applied to a dense wavelength division multiplexing system with N channels, the huge message capacity of N × 904 Gbps can be realized. Furthermore, we find that the bit error rate and the error vector magnitude are similarly influenced by the optical signal-to-noise ratio and the bandwidth of the Gaussian optical filter. The influence presents mostly a synchronization trend with the change of the optical signal-to-noise ratio and the bandwidth of Gaussian optical filter.

Download Full-text

Determination of the Best Emulsion for the Microscopy of Crystals

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096886 ◽

1981 ◽

Vol 39 ◽

pp. 32-33

Author(s):

David A. Grano ◽

Kenneth H. Downing

Keyword(s):

Spatial Frequency ◽

Information Transfer ◽

Signal To Noise Ratio ◽

Experimental Situation ◽

Photographic Emulsion ◽

Modulation Transfer ◽

Signal To Noise ◽

Frequency Space ◽

Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Download Full-text

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100097703 ◽

1981 ◽

Vol 39 ◽

pp. 226-227

Author(s):

W. Kunath ◽

K. Weiss ◽

E. Zeitler

Keyword(s):

Signal To Noise Ratio ◽

Carbon Support ◽

Electronic System ◽

Optic Axis ◽

Hollow Cone ◽

Signal To Noise ◽

Bright Field ◽

Noise Ratio ◽

Single Field ◽

Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

Download Full-text

Information capacity and bandwidth limitations in the SEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100152392 ◽

1989 ◽

Vol 47 ◽

pp. 84-85

Author(s):

D. C. Joy ◽

R. D. Bunn

Keyword(s):

Signal To Noise Ratio ◽

Critical Dimension ◽

Information Capacity ◽

Acquisition Time ◽

Signal To Noise ◽

Sem Image ◽

Probe Size ◽

Minimum Number ◽

Noise Ratio ◽

Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

Download Full-text

Speech Reception in the Presence of Classroom Noise

Language Speech and Hearing Services in Schools ◽

10.1044/0161-1461.1004.221 ◽

1979 ◽

Vol 10 (4) ◽

pp. 221-230 ◽

Cited By ~ 2

Author(s):

Veronica Smyth

Keyword(s):

Signal To Noise Ratio ◽

Learning Processes ◽

Speech Discrimination ◽

Signal To Noise ◽

Speech Reception ◽

Monosyllabic Words ◽

Noise Ratio

Three hundred children from five to 12 years of age were required to discriminate simple, familiar, monosyllabic words under two conditions: 1) quiet, and 2) in the presence of background classroom noise. Of the sample, 45.3% made errors in speech discrimination in the presence of background classroom noise. The effect was most marked in children younger than seven years six months. The results are discussed considering the signal-to-noise ratio and the possible effects of unwanted classroom noise on learning processes.

Download Full-text