Path analysis based on genetic association of yield components and insects pest in upland cotton varieties

Gossypium hirsutum L. is also called upland cotton or Mexican cotton. It is the most widely cultivated species of cotton in the whole world. Globally, about 90% of all cotton production comes from the cultivars derived from this species. Some genetic parameters like monopodial branches per plant, sympodial branches per plant, sympodial branch length, bolls per plant, boll weight, sympo-boll distance, Ginning Out Turn%, staple length (rg = 0.9199**), and fiber strength along with seed cotton yield were evaluated for their potential utilization via selection in seed cotton yield improvement. Significant positive genetic correlations were estimated for monopodial branches per plant (rg = 0.9722**), sympodial branches per plant (rg = 0.7098**), sympodial branch length (rg = 0.617**), bolls per plant (rg = 0.8271**), boll weight (rg = 0.8065**), sympo-boll distance (rg = 0.6507**), Ginning Out Turn (GOT)% (rg = 0.7541**), staple length (rg = 0.9199**), and fiber strength (rg = 0.7534**) with seed cotton yield. A path analysis of all the yield traits under study revealed strong positive direct effects of monopodial branch length (1.1556), sympo-boll distance (0.8173) and staple length (0.7633), while plant height exerted a highly strong direct negative effect (-1.2096) on yield. It is concluded that a direct selection based on monopodial branch length and sympo-boll distance, and staple length is effective, whereas, monopodial branch length, and sympodial branch length are good selection indicators via bolls per plant for yield improvement in cotton.

Download Full-text

Genetic parameters and path analysis of traits of upland cotton for the brazilian semi-arid region

Bioscience Journal ◽

10.14393/bj-v35n6a2019-42408 ◽

2019 ◽

Vol 35 (6) ◽

Author(s):

Damião Ranieri Queiroz ◽

Francisco José Correa Farias ◽

José Jaime Vasconcelos Cavalcanti ◽

Luiz Paulo de Carvalho ◽

Diogo Gonçalves Neder ◽

...

Keyword(s):

Path Analysis ◽

Upland Cotton ◽

Fiber Strength ◽

Natural Fibers ◽

Diallel Cross ◽

Cotton Yield ◽

Seed Cotton ◽

Seed Cotton Yield ◽

Cotton Genotypes ◽

Semi Arid

Upland cotton fiber is one of the most used natural fibers in the production of textile materials worldwide. For this reason, the selection of genotypes that meet the industry’s requirements is one of the main goals of cotton breeding programs. This study aimed to estimate the phenotypic and genotypic correlations among fiber traits and identify the direct and indirect effects of these traits on seed cotton yield of upland cotton genotypes in the semi-arid Brazilian Northeast. This study assessed 21 upland cotton genotypes from a complete diallel cross without reciprocals. The design was randomized blocks, with three replications and 21 treatments. The experiment was conducted in the municipality of Patos - PB, in 2015. The statistical analysis consisted of analysis of variance by the F test, phenotypic and genotypic correlation analysis, and path analysis. The studied materials revealed genetic variability for all traits. Path analysis has shown that the traits fiber elongation, fiber strength, and fiber fineness have a direct positive effect on seed cotton yield.

Download Full-text

Genetics of Inheritance and Interrelationship of Various Agronomic Traits of F2 Population in Cotton (Gossypium hirsutum L.)

Asian Journal of Research in Crop Science ◽

10.9734/ajrcs/2019/v5i1-230082 ◽

2019 ◽

pp. 1-15

Author(s):

Bilal Nawaz ◽

Saira Sattar ◽

Bilal Bashir ◽

Muhammad Jamshaid ◽

Khadim Hussain ◽

...

Keyword(s):

Agronomic Traits ◽

Fiber Strength ◽

Cotton Yield ◽

Seed Cotton ◽

Gossypium Hirsutum L ◽

Seed Cotton Yield ◽

F2 Population ◽

Fiber Fineness ◽

Boll Weight ◽

Beak Size

Background: Cotton (Gossypium hirsutum L.) is grown in more than sixty countries worldwide. It is an important fiber crop in the world. It plays a vital role in our national economy being the source of earning of foreign exchange, therefore, it is considered to be the backbone of the economy of Pakistan. In Pakistan, millions of families are associated with cotton and textile industry for their livelihood. Results: In this experiment F2 population of the cross L. A. Frego Bract x CIM-600 and their parents was sown in randomized complete block design with three replications during normal growing season of the year 2014 to sort out best performing genotypes for yield related traits. Analysis of variance (ANOVA) revealed that parental and their F2 population showed significant differences for all the observed agronomic traits (plant height, number of monopodia branches, number of sympodial branches, number of bolls per plant, boll weight, ginning out turn, bract type, boll shape, beak size, seed cotton yield, staple length, fiber strength and fiber fineness). Estimation of correlation revealed that seed cotton yield was found positively correlated sympodial branches, fiber fineness and boll weight while ginning out turn, bract type, beak size, staple length and fiber strength were negatively associated with seed cotton yield. Epistasis was not found to be involved in any of the traits. Conclusion: The correlation and genetics study of various yield related traits provides us useful information for effective selection and sustainable breeding programs. Estimation of broad sense heritability ( ) in F2 populations for different traits vary as following order; ginning out turn>plant height>seed cotton yield>sympodia branches>fiber length>fiber strength>bolls per plant>monopodia branches>boll weight>fiber fineness with heritability 0.90, 0.79, 0.78, 0.75, 0.73, 0.71 0.67, 0.64, 0.63 and 0.50 respectively. Results suggested form heritability and correlation that these traits can be improved either through appropriate selection method or hybrid breeding programme.

Download Full-text

Genetic analysis of yield components and fiber quality parameters in upland cotton

International Multidisciplinary Research Journal ◽

10.25081/imrj.2019.v9.5284 ◽

1970 ◽

pp. 13-19

Author(s):

Bilal Nawaz, Saira Sattar, Tanwir Ahmad Malik

Keyword(s):

Upland Cotton ◽

Phenotypic Correlation ◽

Cotton Yield ◽

Seed Cotton ◽

Seed Cotton Yield ◽

Maximum Value ◽

Fiber Fineness ◽

Significant Difference ◽

Boll Weight ◽

Seed Index

The experiment was laid to analyze genetic features, genotypic and phenotypic correlation coefficients, path analysis with regression analysis among yield contributing traits in a selected F3 populations of upland cotton including parents. In this research experiment ANOVA showed significant difference among all individual plants in F3 populations. Monopodia per plant and bolls per plant possessed maximum value of PCV% and GCV%. Maximum broad sense heritability (≥ 90) was found in all recorded traits except seeds per boll, fiber length and lint percentage. Correlation studies revealed that Seed cotton yield positively correlated with all yield contributing traits i.e. plant height, monopodial branches per plant, Number of bolls per plant, boll weight, lint weight, seed index, lint index, seeds per boll, fiber fineness, fiber strength and fiber uniformity at both genotypic and phenotypic level whereas it depicted negative relationship with staple length. Path coefficient analysis showed that maximum direct positive effect was found of lint weight (2.6005) on seed cotton yield followed fiber fineness (1.2628), seed index (1.1449) and bolls per plant (1.0027). Regression study exhibited that maximum value of R2 for lint weight (0.9509) and boll weight (0.3735) depicted that 95.09% and 37.35% variation in the seed cotton yield, due to its relationship with lint weight and boll weight. It is concluded that there is a great genetic potential in F3 populations for mostly yield contributing traits for further enhancing yield. So those traits should be used as selection criteria during breeding for yield.

Download Full-text

Selection of Genotypes and Contributing Characters to Improve Seed Cotton Yield of Upland Cotton (Gossypium hirsutum L.)

Asian Research Journal of Agriculture ◽

10.9734/arja/2020/v13i130095 ◽

2020 ◽

pp. 31-41

Author(s):

M. M. A. Ali ◽

S. Kundu ◽

M. F. Alam ◽

B. K. Biswas ◽

M. Hasanuzzaman

Keyword(s):

Correlation Coefficient ◽

Upland Cotton ◽

Main Stem ◽

Research Centre ◽

Genetic Advance ◽

Cotton Yield ◽

Seed Cotton ◽

Seed Cotton Yield ◽

Boll Weight ◽

High Heritability

The experiment was conducted at Cotton Research Centre, Chowgacha, Jessore during 2015-2016 with twenty genetically diverged genotypes, with a view to select desirable genotypes and important characters enhancing seed cotton yield in upland cotton. The experiment was laid out in RCBD with three replications. The unit plot size was 4.5 m x 4.5 m and the spacing, 45 cm ×90 cm. Data were recorded from randomly selected ten plants on monopodial branches plant-1, primary sympodial branches plant-1,secondary sympodial branches plant-1, main stem nodes plant-1, days to 1st (5%) flowering, days to 1st boll splitting, bolls plant-1, single boll weight (g), unburst bolls plant-1, plant height (cm), seeds boll-1, seed cotton yield (kg ha-1). The genotype JA-08/D produced the highest seed cotton yield (3430 kg ha-1) followed by two genotypes JA-08/C (3329 kg ha-1) and JA-08/E (3226 kg ha-1). Though high heritability (90.36-97.46%) were estimated for four characters but high heritability along with high genetic advance values were observed for bolls plant-1, boll weight and seeds boll-1. The moderate heritability (83.58%) with high genetic advance (48.54%) suggests seed cotton yield is controlled by additive and non-additive genetic factors. In general, genotypic correlation coefficient was higher than corresponding phenotypic correlation coefficient due to inherent potential of the genotypes for expressing the individual characters. However, six characters, secondary sympodial branches plant-1, main stem nodes plant-1, days to 1st flowering, bolls plnat-1, boll weight and seeds boll-1 showed positive and significant association. Upon partitioning the correlation coefficients of seed cotton yield with other characters confirmed significant contribution of three characters like bolls plant-1, boll weight and seeds boll- 1. Therefore, three genotypes, JA-08/D, JA-08/C and JA-08/E and three characters, bolls plant-1, boll weight and seeds boll- 1 may be considered by the breeders for improving seed cotton yield in upland cotton.

Download Full-text

Yield and some agronomic parameters of upland cotton as affected by planting dates

International Journal of Cotton Research and Technology ◽

10.33865/ijcrt.002.01.0357 ◽

2020 ◽

Vol 2 (1) ◽

pp. 37

Author(s):

Waqas Ahmed Lashari ◽

Salma Naimatullah ◽

Hamza Afzal

Keyword(s):

Plant Height ◽

Upland Cotton ◽

Planting Date ◽

Research Station ◽

Cotton Yield ◽

Seed Cotton ◽

Planting Dates ◽

Seed Cotton Yield ◽

Average Maximum ◽

Boll Weight

A field experiment was conducted at ICI Research Farm, Multan to evaluate the effect of different sowing dates on plant height, number of monopodia, number of sympodia, number of bolls per plant, boll weight, seed cotton yield kg/ha of two upland cotton varieties (ICI-2121 and ICI-2424) developed by ICI Pakistan Limited, Multan against a standard check variety IUB-2013 during 2019, and 2020 years. These varieties were planted on 1st April, 15th April, 1st May, 15th May, 1st June, and 15th June, at ICI Cotton Research Station, 19-Kasi Vehari Road, Multan. Results revealed that statistically highly significant differences in planting dates were observed for all the parameters studied except number of monopodial branches and boll weight which depicted non-significant differences. Regarding varieties and interaction between varieties and planting times, similar trend of statistical differences was observed. As regards to planting dates, generally, all the parameters under study showed their maximum performance when crop was planted on 1st May followed by 1st April planting date, whereas, minimum performance of the parameters was recorded when the crop was planted on 15th June followed by 1st June. Regarding varietal performance, on an average, maximum plant height (146cm) was observed in ICI-2121 followed by IUB-2013. Same trend of performance of varieties regarding number of monopodia and sympodia per plant was observed. Regarding average number of bolls per plant in different varieties, it was observed that ICI-2121 produced maximum (32 bolls) followed by ICI-2424 (31 bolls) and IUB-2013 (28 bolls) irrespective of planting dates. The same trend of varietal performance regarding boll weight was recorded. When seed cotton yield (kg/ha) was evaluated, on an average of varieties, ICI-2121 produced maximum seed cotton yield (1228 kg/ha) followed by ICI-2424 and IUB-2013 which produced 1147 and 1046 kg/ha seed cotton yield respectively irrespective of planting dates. It was concluded that under agro-climatic conditions of Multan, 1st May planting date was evaluated as optimum cotton sowing time. Before or after 1st May, this study does not recommend growing cotton in this particular zone. Among cotton varieties, ICI-2121 is recommended for sowing under this planting time being producing higher yields.

Download Full-text

Heritability and correlation analysis of morphological and yield traits in genetically modified cotton

10.21203/rs.3.rs-17787/v1 ◽

2020 ◽

Author(s):

Abdul Rehman ◽

Nida Mustafa ◽

Du Xiongming ◽

Muhammad Tehseen Azhar

Keyword(s):

Plant Height ◽

Fiber Length ◽

Fiber Strength ◽

Cotton Yield ◽

Seed Cotton ◽

Plant Seed ◽

Seed Cotton Yield ◽

Fiber Fineness ◽

Boll Weight ◽

Seed Index

Abstract Background Cotton is known for its fiber and it is grown in tropical and sub-tropical areas of the world. It has a significant role in GDP of Pakistan. Therefore, present two years research was conducted to estimate heritability and association among various yield contributing parameters of cotton. The selected genotypes of cotton were hybridized in green house of the department. The F 0 cotton seed along with parents were planted in the field conditions during May, 2018. The sowing of this experiment was completed in three replications followed by RCBD. The data was recorded at maturity for various agronomic traits including plant height, number of bolls per plant, number of sympodial branches per plant, seed cotton yield, boll weight, seed index, ginning out turn, fiber length, fiber strength, and fiber fineness. Level of significance of data was computed by ANOVA to assess the difference among cotton genotypes which was used for estimation of heritability and correlation analysis among the related traits. Results Association analysis revealed that seed cotton yield had significant positive relationship with plant height, number of bolls per plant, number of sympodial branches per plant, ginning out turn, staple length and fiber strength. Staple length and fiber strength were negatively linked with each other. Estimates of heritability were high for all observed traits except number of sympodial branches per plant and boll weight. Conclusion The parent IUB-222 was found best for plant height, number of bolls per plant, boll weight, ginning out turn, seed cotton yield and seed index. NIAB-414 and VH-367 were identified best parents for fiber length, strength and fineness. Among crosses NIAB-414 × IUB-222 was best for number of bolls per plant, seed index, seed cotton yield and fiber fineness. Whereas, cross NIAB-414 × CIM-632 was good for plant height. The combination of A555 × CIM-632 was best for number of sympodial branches per plant, boll weight, fiber length and strength. VH-367 × CIM-632 proved best for ginning out turn. The correlation results from this study would be helpful to breed cotton cultivars with good yield and quality characters. Broad sense heritability was high for all of parameters which provides the strong evidence that selection in early generations can improve the performance of these traits.

Download Full-text

Heritability and correlation analysis of morphological and yield traits in genetically modified cotton

10.21203/rs.3.rs-17787/v3 ◽

2020 ◽

Author(s):

Abdul Rehman ◽

Nida Mustafa ◽

Du Xiongming ◽

Muhammad Tehseen Azhar

Keyword(s):

Plant Height ◽

Fiber Length ◽

Fiber Strength ◽

Cotton Yield ◽

Seed Cotton ◽

Plant Seed ◽

Seed Cotton Yield ◽

Fiber Fineness ◽

Boll Weight ◽

Seed Index

Abstract Background: Cotton is known for fiber extraction and it is grown in tropical and sub-tropical areas of the world due to having hot weather. Cotton crop has a significant role in GDP of Pakistan. Therefore, the two-years research was conducted to estimate heritability and association among various yield contributing parameters of cotton, i.e., plant height, number of bolls per plant, number of sympodial branches per plant, seed cotton yield, boll weight, seed index, ginning outturn (GOT), fiber length, fiber strength, and fiber fineness. Results: Association analysis revealed that seed cotton yield had significant positive correlation with plant height, number of bolls per plant, number of sympodial branches per plant, ginning outturn (GOT), staple length and fiber strength. Staple length and fiber strength were negatively linked with each other. Estimates of heritability were high for all of the traits except number of sympodial branches per plant and boll weight.Conclusion: The parent IUB-222 was found to be the best for plant height, number of bolls per plant, boll weight, ginning outturn (GOT), seed cotton yield and seed index. The genotypes namely NIAB-414 and VH-367 were identified as the best parents for fiber length, strength and fineness. Among the crosses NIAB-414 × IUB-222 was the best for number of bolls per plant, seed index, seed cotton yield and fiber fineness, whereas, cross of NIAB-414 × CIM-632 was good for plant height. The combination of A555 × CIM-632 was the best for number of sympodial branches per plant, boll weight, fiber length and strength, and VH-367 × CIM-632 proved the best for ginning outturn (GOT).

Download Full-text

Heritability and correlation analysis of morphological and yield traits in genetically modified cotton

10.21203/rs.3.rs-17787/v2 ◽

2020 ◽

Author(s):

Abdul Rehman ◽

Nida Mustafa ◽

Du Xiongming ◽

Muhammad Tehseen Azhar

Keyword(s):

Plant Height ◽

Fiber Length ◽

Fiber Strength ◽

Cotton Yield ◽

Seed Cotton ◽

Plant Seed ◽

Seed Cotton Yield ◽

Fiber Fineness ◽

Boll Weight ◽

Seed Index

Abstract Background Cotton is known for fiber extraction and it is grown in tropical and sub-tropical areas of the world due to having hot weather. Cotton crop has a significant role in GDP of Pakistan. Therefore, the two years research was conducted to estimate heritability and association among various yield contributing parameters of cotton i.e. plant height, number of bolls per plant, number of sympodial branches per plant, seed cotton yield, boll weight, seed index, GOT, fiber length, fiber strength, and fiber fineness. Results Association analysis revealed that seed cotton yield had significant positive correlation with plant height, number of bolls per plant, number of sympodial branches per plant, GOT, staple length and fiber strength. Staple length and fiber strength were negatively linked with each other. Estimates of heritability were high for all of the traits except number of sympodial branches per plant and boll weight. Conclusion The parent IUB-222 was found to be best for plant height, number of bolls per plant, boll weight, GOT, seed cotton yield and seed index. The genotypes namely NIAB-414 and VH-367 were identified as best parents for fiber length, strength and fineness. Among the crosses NIAB-414 × IUB-222 was best for number of bolls per plant, seed index, seed cotton yield and fiber fineness, whereas, cross of NIAB-414 × CIM-632 was good for plant height. The combination of A555 × CIM-632 was best for number of sympodial branches per plant, boll weight, fiber length and strength, and VH-367 × CIM-632 proved best for GOT.

Download Full-text

Causation studies for Kapas yield, yield components and lint quality traits in Mexican cotton (Gossypium hirsutum L.)

Environment Conservation Journal ◽

10.36953/ecj.2021.22341 ◽

2021 ◽

Vol 22 (3) ◽

pp. 357-363

Author(s):

Mudhalvan S ◽

S. Rajeswari ◽

L. Mahalingam ◽

P. Jeyakumar ◽

M. Muthuswami ◽

...

Keyword(s):

Plant Height ◽

Fiber Strength ◽

Block Design ◽

F1 Hybrids ◽

Fibre Strength ◽

Cotton Yield ◽

Seed Cotton ◽

Seed Cotton Yield ◽

Randomized Block Design ◽

Boll Weight

Cotton is a very important crop that consists of traits with different associationship due to genetic and environmental factors. In order to determine the degree of association between seed cotton yield and important traits, a study was done using an RBD experiment with 30 hybrids. Seed cotton yield, plant height, GOT, number of sympodial braches, boll weight, bolls per plant, span length, fineness and strength data were collected and analysed. The experiment was done with 30 F1 hybrids have delivered through Line x Tester mating configuration utilizing six lines and five testers were planted in a Randomized Block Design (RBD) with two replications at the Department of Cotton, TNAU, Coimbatore. Seed cotton yield per plant was found to have significant positive genotypic connection with boll weight (0.5810), number of bolls per plant (0.3867), plant height (0.422) and ginning percent (0.2182) however altogether and contrarily related with consistency proportion at genotypic level. The phenotypic relationship esteems likewise uncovered that seed cotton yield per plant had highly huge and positive phenotypic connection with number of bolls per plant (0.3470) and boll weight (0.4763). Path coefficients were processed to assess the commitment of individual characters to yield in cotton. The way investigation demonstrated high certain immediate impact of number of bolls per plant (0.4743) and fiber strength (0.6880) on seed cotton yield. Micronaire value displayed high sure circuitous impact on seed cotton yield through range length (0.3393), the outcome showed that number of bolls per plant had a high sure relationship with seed cotton yield and sympodial per plant recorded low certain connection with seed cotton yield. It was therefore concluded that selection of high yielding cotton hybrids could emphasize more on lint yield, boll weights, plant height and bolls per plant for better-performing lines. Gin outturn and fibre strength could be used indirectly to improve seed cotton yield through other traits.

Download Full-text