scholarly journals Study on Correlation between Compressive Strength and Compressional Wave Velocity for CLSM According to Curing Time

2015 ◽  
Vol 16 (11) ◽  
pp. 5-11 ◽  
Author(s):  
Woojin Han ◽  
Jongsub Lee ◽  
Samdeok Cho ◽  
Jinhwan Kim ◽  
Yonghoon Byun
2020 ◽  
Vol 12 (4) ◽  
pp. 1379 ◽  
Author(s):  
Marzouk Mohamed Aly Abdelhamid ◽  
Dong Li ◽  
Gaofeng Ren

Carbonate building materials and engineering constructions are exposed to severe seasonal environmental fluctuations and result in a full or partial disintegration, especially in cold regions, and employment of nondestructive methods for evaluating the durability of building materials subject to frost weathering is gaining great significance. This research aims to obtain reliable relationships between unconfined compressive strength decrease and nondestructive parameters variations of limestone types under frost conditions and provide useful information regarding their durability in order to ensure the long-term viability or sustainability of these materials used for constructions against frost conditions. In this study, five important types of Chinese limestone used as construction materials were subjected to 50 frost cycles. Unconfined compressive strength, compressional wave velocity and spatial attenuation, and porosity were obtained at the end of every 10 cycles. As a result of progression in frost cycles, the increase and decrease rates were determined at the end of every 10 cycles, and the relationships between them were obtained to predict the loss ratios of unconfined compressive strength (RDσc). Results indicated that at the end of 40th cycles, there was a high correlation between RDσc and spatial attenuation loss with an R2 of 0.8584. Furthermore, there was also a strong relationship between RDσc and compressional wave velocity decrease after the end of 20th and 50th cycles with an R2 of 0.9089 and 0.9025, respectively. Therefore, these relations are reliable to provide useful information for durability and viability of studied samples under frost conditions and support the use of the ultrasonic measurements. It can also be successfully used for pre-estimation of unconfined compressive strength loss of studied limestone types against frost weathering without any tests.


Author(s):  
L. Dobereiner ◽  
M. H. de Freitas

AbstractIt is proposed that coverage of the class of material described in BS 5930 as weak rock, is in need of improvement.Results from research into the behaviour of weak sandstone (0.5-20 MPa uniaxial compressive strength) are presented to illustrate this need. The strength, deformability, and propagation of compressional waves are reported for weak sandstones and recommendations presented for describing these materials and for testing their strength and deformability. Problems associated with the measurement of compressional wave velocity are also considered.An index test for assessing the strength of weak sandstone (the index of vacuum saturated moisture content) is described and presented.


Sign in / Sign up

Export Citation Format

Share Document