GNSS signals ionospheric propagation characteristics in space service volume

Author(s):  
Kui Lin ◽  
Xingqun Zhan ◽  
Jihong Huang
2004 ◽  
Vol 22 (5) ◽  
pp. 1705-1718 ◽  
Author(s):  
J. LaBelle

Abstract. For over a decade, Dartmouth College has operated programmable radio receivers at multiple high-latitude sites covering the frequency range 100-5000kHz with about a 1-s resolution. Besides detecting radio emissions of auroral origin, these receivers record characteristics of the ionospheric propagation of natural and man-made signals, documenting well-known effects, such as the diurnal variation in the propagation characteristics of short and long waves, and also revealing more subtle effects. For example, at auroral zone sites in equinoctial conditions, the amplitudes of distant transmissions on MF/HF frequencies are often enhanced by a few dB just before they fade away at dawn. The polarization and/or direction of the arrival of ionospherically propagating signals in the lower HF range (3-5MHz) show a consistent variation between pre-midnight, post-midnight, and pre-dawn conditions. As is well known, magnetic storms and substorms dramatically affect ionospheric propagation; data from multiple stations spanning the invariant latitude range 67-79° reveal spatial patterns of propagation characteristics associated with magnetic storms and substorms. For example, in the hours preceding many isolated substorms, favorable propagation conditions occur at progressively lower latitudes as a function of time preceding the substorm onset. For some of these effects, explanations follow readily from elementary ionospheric physics, but understanding others requires further investigation.Key words. Magnetospheric physics (annual phenomena) – Radio science (ionosphere propagation; radio-wave propagation)6


2013 ◽  
Vol 133 (12) ◽  
pp. 954-960 ◽  
Author(s):  
Akihiro Ametani ◽  
Kazuki Kawamura ◽  
Asha Shendge ◽  
Naoto Nagaoka ◽  
Yoshihiro Baba

2014 ◽  
Vol E97.B (10) ◽  
pp. 2083-2092 ◽  
Author(s):  
Yoshio KARASAWA ◽  
Ichiro OSHIMA ◽  
Fatahuddin TAMRIN ◽  
Yui SAKAMOTO ◽  
Rizwan ARIF ◽  
...  

2014 ◽  
Vol E97.C (9) ◽  
pp. 880-887 ◽  
Author(s):  
Mingzhe RONG ◽  
Tianhui LI ◽  
Xiaohua WANG ◽  
Dingxin LIU ◽  
Anxue ZHANG

2021 ◽  
Vol 11 (9) ◽  
pp. 3951
Author(s):  
Hui Zhao ◽  
Huiyuan Li ◽  
Haitao Zhao ◽  
Leisheng Li ◽  
Jian Li

The influence of different bend curvatures on the detonation wave propagation was analyzed by an advanced numerical simulation system. The mechanism of propagation properties is revealed by cellular structure, internal and external boundary pressure distribution, propagation process of detonation wave and chemical reaction. The cellular structure and detonation wave front of bend with different curvature are very different. The simulation results show that the detonation wave with regular cell structure propagating through the curved parts induces detonation cell size increased by diffraction near the inner wall while detonation reflected on the bottom surface resulting in decrease of cell size. Detonation wave was affected by the rarefaction wave and compression wave in the bent pipe. The pressure distribution of the bend shows that the peak pressure in the 450 curvature is the largest, which should be paid more attention in industrial design. The chemical reaction could indicate the propagation characteristics of detonation wave, and different propagation characteristics have different profiles of chemical components.


Sign in / Sign up

Export Citation Format

Share Document