scholarly journals Design and Setting up of a Laboratory Drive System with Remote Monitoring and Control

2017 ◽  
Vol 15 (2) ◽  
pp. 25-30
Author(s):  
V. Dimitrov
Keyword(s):  
Remote Monitoring ◽  
Asynchronous Motor ◽  
Laboratory System ◽  
Building Automation ◽  
Monitoring And Control ◽  
Frequency Converters ◽  
Speed Regulation ◽  
Mandatory Requirement ◽  
Remote Monitoring And Control ◽  
And Control

Abstract Systems for remote monitoring and control on energy consumption, efficiency and proper operation of the controlled objects are very often used in different spheres of industry, building automation, electricity distribution network etc. Various types of intelligent energy meters, PLCs and other control devices are involved in such systems. On the other hand, soft starters are widely used in industry and building automation for control on asynchronous drives when the speed regulation is not a mandatory requirement. They are cheaper than inverters and frequency converters and allow temporal reduction of the torque and current surge during start-up, as well as smooth deceleration. This is why the study of the principles of operation and setting up of intelligent energy meters, soft starters and PLC is very important. A laboratory system has been designed and built. An asynchronous motor is controlled by a soft starter and remote monitoring and control by contemporary devices has been provided. A methodology of design and setting up has been developed.

scholarly journals Methodology for Testing of a Drive System with Remote Monitoring and Control

2017 ◽  
Vol 15 (3) ◽  
pp. 12-15
Author(s):  
V. Dimitrov
Keyword(s):  
Remote Monitoring ◽  
Asynchronous Motor ◽  
Optimal Solution ◽  
Drive System ◽  
Laboratory System ◽  
Monitoring And Control ◽  
Soft Starter ◽  
Remote Monitoring And Control ◽  
And Control ◽  
Proper Operation

Abstract A laboratory drive system with remote monitoring and control has been designed and built. An asynchronous motor controlled by a soft starter and remote monitoring and control by contemporary devices has been provided. This laboratory system is used for research and in teaching. In this paper, methodology of tests is developed. Some examinations are presented. Thus an experimental verification of the developed methodology is carried out. Systems for remote monitoring and control on energy consumption, efficiency and proper operation of the controlled objects are very often used in different spheres of industry, building automation, transport, electricity distribution network, etc. The optimal solution for each particular case could be achieved but a complex research and testing have to be previously performed using the developed methodology.

scholarly journals Remote Monitoring and Control for an Isolate Prototype Substation Model

2021 ◽  
Vol 309 ◽  
pp. 01121
Author(s):  
G Sandhya Rani ◽  
U Vijaya Laxmi ◽  
P Srividya Devi ◽  
M Naga Sandhya Rani
Keyword(s):  
Problem Solving ◽  
System Design ◽  
Real Time ◽  
Remote Monitoring ◽  
Monitoring And Control ◽  
Electrical System ◽  
Electrical Parameters ◽  
Remote Monitoring And Control ◽  
And Control

The objective of this paper is to monitor the electrical parameters like voltage, current, etc., remotely and display all the obtained real time values for a substation isolate. This paper is furnished to assure the load and electrical system equipment by the activation of relay, whenever the acquired parameters exceed the predefined values. Generally, this Proposed system design makes use of microcontroller, but the prototype of this circuit modelled in Proteus and can be executed by using ATmega 168 microcontroller. When supply is given to the designed hardware, all the sensors start sensing their respective parameters i. e., voltage, current, temperature etc., and modernize all the values on the display. Comparison between the problem-solving time values and the preordained values is continuously carried out by the microcontroller, if any of these values go beyond the pre-defined values, it sends fault alert to the relay, updates it on the screen and sends the same as an SMS through GSM for the rectification.

Система дистанційного моніторингу та керування кліматичними параметрами приміщень в процесі промислового виробництва

2020 ◽  
pp. 19-23
Author(s):  
Ігор Бережний ◽  
◽  
Адріан Наконечний ◽  
Keyword(s):  
Energy Efficiency ◽  
Comparative Analysis ◽  
Technological Process ◽  
Remote Monitoring ◽  
High Speed ◽  
Monitoring And Control ◽  
Remote Monitoring And Control ◽  
The Cost ◽  
And Control ◽  
Communication Lines

Based on the research and comparative analysis of existing systems, an algorithm for remote monitoring and control of the technological process using IoT technologies is proposed and developed. We consider a system with flexible algorithms, which combines different data protocols using Wi-Fi technology, which allows you to use this type of system in any industry safely with high speed, energy efficiency and without the cost of communication lines.

Sign in / Sign up

Export Citation Format

Share Document