scholarly journals Permeability of the Mixture of Fine Grained Soil and Fly Ash from Fluidized Bed Combustion

Author(s):  
Karolina Knapik ◽  
Joanna Bzówka

Abstract Based on known correlations permeability was calculated for the mixtures containing various proportions of selected FBC fly ash, Speswhite kaolin and lime. The influence of initial water content of the mixtures was also considered. The study was limited to the first four weeks of curing time. Results of calculations were discussed on the background of previously obtained observations for mixtures of tested materials.

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2527
Author(s):  
Natalia Wielgus ◽  
Jan Kubica ◽  
Marcin Górski

This paper presents novel research on a fluidized bed combustion (FBC) fly ash-based geopolymer as a contribution to the problem of FBC fly ash disposal, and a proposal for a new geopolymer composition—an environmentally friendly material that is possible to use in construction. Geopolymer samples of various composition (containing FBC fly ash as the main raw material, metakaolin and CRT glass as additional components, and sodium silicate and sodium hydroxide as activators) were subjected to flexural and compressive strength tests. An investigation on the effect of the demolding time was carried out on one selected mixture. The test showed that both the composition and the demolding time have a decisive influence on the basic mechanical properties. A mixture containing FBC fly ash to metakaolin in a mass ratio of 3:1, removed from the mold after 14 days, was found to be the best in terms of the mechanical parameters expected from a material that could be used in construction, e.g., for the production of precast elements. According to the results obtained, FBC fly ash is a promising and environmentally friendly raw material for the production of geopolymer, with good mechanical properties and low density. Moreover, a high compressive strength can be obtained by curing the geopolymer at ambient temperature.


2014 ◽  
Vol 1054 ◽  
pp. 148-153
Author(s):  
Tereza Otcovská ◽  
Pavel Padevět

Fly ash is a waste product produced during combustion of coal. There are two basic types of fly ash. According to the type of combustion, there is produces pulverised coal combustion (PCC) fly ash or fluidized bed combustion (FBC) fly ash. Use of fly ash additives influences moisture properties of binder gels (cement paste). The particular object of interest of this post is capillary action of water in the binder gels with different concentration of fly ash in the mixture. There are substantial differences among moisture properties of binder gels with FBC fly ash additives compared with the binder gels with PCC fly ash additives.


2020 ◽  
Author(s):  
Natalia Paszek ◽  
Marcin Górski

ThispaperpresentsastudyintothemechanicalbehaviourofFluidizedBedCombustion (FBC)fly ash-based geopolymer.FBCflyashisaby-product of a burning of a solid fuel (hard coal in case of this study) in a furnace at a low temperature. FBC fly ash is a type of a waste which is more difficult to recycle than pulverized fly ash.UsingFBCflyashin geopolymers offers one possible way to recycle it. The main goals of the investigation were to determine the influence of curing temperature and curing conditions on the strength of FBC fly ash-based geopolymer; to determine the changes of strength over time and the changes of the temperature inside the geopolymer during the curing process. Tests have shown that the strength of the geopolymer generally increases in line with the increase of a curing temperature. The compressive strength stabilizes after 5 days of curing and yet continues to gain extra strength over the longer term. Theflexuralbehaviourisnotmonotonicandthereforehardtopredict.The temperature inside the geopolymer rises rapidly until reaching around 27.5°C and then decreases steadily. Keywords: geopolymer, Fluidized Bed Combustion Fly ash, temperature, strength


Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 690
Author(s):  
Artur Łagosz ◽  
Tomasz Tracz ◽  
Radosław Mróz

A significant reduction in the CO2 emission associated with cement production is obtained by partially replacing Portland cement with supplementary cementing materials (SCM’s): e.g., siliceous fly ash or granulated blast furnace slag. In the near future, the limited availability of these materials will do more attractive to use ashes from combustion in fluidized bed boilers, which currently are mainly deposited in various landfills. Paper identifies the effect of Fluidized Bed Combustion (FBC) fly ash from both hard and brown coal combustion on the durability of mortars exposed to sodium and magnesium sulfate solution at different curing temperature: 20 and 5 °C. The evaluation was based on the results of long-term linear changes of mortar samples made with Portland cement and different amounts of FBC fly ash addition stored in a corrosive environment, as well as the evaluation of the type of formed corrosion products using XRD and microstructural studies (SEM/EDS). It has been shown that amount of FBC fly ashes used in binders significantly determines sulfate resistance of prepared cements as well as its chemical composition. By using fluidized ashes, the sulfate resistance of cement binders can be achieved with their content even of 15%.


2014 ◽  
Vol 4 (5) ◽  
pp. 706-710
Author(s):  
C. M. Chan ◽  
H. Y. Yong

When a soil is disturbed upon remolding, it may lose part or all of its strength. As time passes, the structural arrangement of the soil particles would be restored to a stable form and the soil would regain hardness under constant volume and water content. The process is known as “thixotropic hardening”. On another note, dredged marine soils of the fine-grained type can be reused as a backfill material instead of being disposed to the open sea. The rest period required for the relocated soil to regain strength and stiffness, i.e. thixotropic hardening, needs to be estimated precisely. For this purpose, a study on the phenomena of strength and stiffness gain by a dredged marine clay was carried out. The strength and stiffness improvement with time was measured using the vane shear and fall cone tests respectively. The clay was remolded at different water contents in multiples of the soil’s liquid limit (LL), namely 0.75LL, 1.00LL and 1.25LL, in order to evaluate the effect of initial water content on thixotropic hardening. A separate series of samples were prepared with light solidification using cement, to examine the possibilities of enhancing the soil’s improvement in a shorter rest period. The results showed the dredged marine clay can potentially be used as a backfill material for reclamation works, with lower initial water content and light solidification contributing to accelerated better performance


2015 ◽  
Vol 1106 ◽  
pp. 29-32
Author(s):  
Denisa Orsakova ◽  
Rudolf Hela ◽  
Petr Novosad ◽  
Jaroslav Valek

One of the possibilities how to activate fly ash in cement composites is to add calcium oxide as a chemical activator. This addition can improve pH of composites. Because fluidized bed combustion (FBC) fly ash contain around 15% of calcium oxide, we decided to add FBC fly ash into binder system of cement composite with classic fly ash.Three mixtures were designed. First one contain in binder system only cement and classic fly ash. In second and third mixture was part (25% resp. 50%) of classic fly ash replaced by FBC fly ash. Consistency, shrinkage, compressive strength and freeze-thaw resistance were tested. Microstructure was detected by XRD and TG analyses.


Sign in / Sign up

Export Citation Format

Share Document