scholarly journals Synthesis and Crystal Structure of the New Telluric Acid Adduct (RbCl)3·Te(OH)6

2012 ◽  
Vol 67 (1) ◽  
pp. 1-4
Author(s):  
Dirk Mahlmeister ◽  
Elisabeth Irran

The new telluric acid adduct (RbCl)3 ・ Te(OH)6 was prepared by dissolving RbCl and Te(OH)6 in the molar ratio of 3 : 1 in deionized water at r. t. and slow evaporation of the solvent in air. The crystal structure of the colorless crystals was determined with single-crystal X-ray diffraction (trigonal space group: R3̄c (no. 167), a = 14.4392(8), c = 10.4301(16) Å , Z = 6). In (RbCl)3 ・ Te(OH)6, the rubidium atom is surrounded by five chlorine and four oxygen atoms in form of an irregular tricapped trigonal prism. Each tellurium atom is octahedrally surrounded by six oxygen atoms. The Te(OH)6 octahedra and the RbCl5O4 polyhedra are linked to a dense three-dimensional network which is additionally strengthened by hydrogen bonds.

1997 ◽  
Vol 52 (2) ◽  
pp. 256-258 ◽  
Author(s):  
Evgeni V. Avtomonov ◽  
Rainer Grüning ◽  
Jörg Lorberth

Abstract The crystal structure of the title compound has been determined by X-ray diffraction methods. Due to the Lewis acidic character of the iodine substituent a “zig-zag” chain is formed via intermolecular interactions (2.933(4) A) between iodine and oxygen atoms of theocarbamate moiety. A three-dimensional network is formed through hydrogen-bridging (2.04 A) between NH-groups and the oxygen atoms of the neighbouring carbamate group of the next molecule.


1993 ◽  
Vol 48 (7) ◽  
pp. 886-892 ◽  
Author(s):  
Adalbert Lossin ◽  
Gerd Meyer

Single crystals of CsPr2(CH3COO)7 were obtained from an acetic acid solution of Pr(CH3COO)3 • H2O and Cs2CO3 in a molar ratio of 4:1 at 120°C. It crystallizes in the triclinic system, PĪ (no. 2), Z = 2, a = 1028.1(5), b = 1034.6(5), c = 1199.4(6) pm, α = 84.82(2), β = 67.07(3), γ = 76.01(2)°, Vm = 343.3(3) cm3/mol, R = 0.031, Rw = 0.027. The crystal structure contains infinite chains, 1∞[Pr2(CH3COO)6], running along the [110] direction. The chains are built up by bridging acetate ions coordinated to two crystallographically different Pr3+ ions which are both surrounded by 9 oxygen ligands. These chains are linked by “intercalated” Cs(CH3COO) to layers parallel (100). Cs+ has contacts to oxygen atoms of neighbouring layers, such that a three-dimensional network is formed.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Idelle Nono Kamga ◽  
Augustin Nkwento Nana ◽  
Bridget Ndoye Ndosiri ◽  
Frédéric Capet ◽  
Michel Foulon ◽  
...  

Abstract A new salt (CH6N3)[t-Cr(C2O4)2(H2O)2]·2H2O (1) (CH6N3 + = guanidinium cation) has been synthesized and characterized by single-crystal X-ray diffraction, FT-IR and UV–Vis spectroscopies, elemental and thermogravimetric analyses. In the crystal structure of 1, the chromate(III) ion lies on an inversion center in the form of an elongated octahedron. The coordination sphere consists of four oxygen atoms of two chelating oxalato ligands in the equatorial plane and two axial oxygen atoms of water ligands. The structural feature of focal interest in the structure of 1 is the formation of pillars of [Cr(C2O4)2(H2O)2]− complex anions and CH6N3 + guanidinium cations, with the next-neighbor cations rotated by an angle of 60° relative to each other. O–H···O and N–H···O hydrogen bonds play an important role in the construction of the three-dimensional network. The electron paramagnetic resonance (EPR) and magnetic properties of 1 have also been investigated.


Author(s):  
Ana Paula Lopes de Melo ◽  
Leandro Bresolin ◽  
Bianca Barreto Martins ◽  
Vanessa Carratu Gervini ◽  
Adriano Bof de Oliveira

The reaction in methanol of CuII acetate monohydrate with 5-fluoroisatin 3-oxime deprotonated with KOH in a 1:2 molar ratio and recrystallization from pyridine yielded the title compound, [Cu(C8H4FN2O2)2(C5H5N)2]. In the centrosymmetric complex, the anionic form of the isatin oxime acts as a κ2 N,O donor, building five-membered metallarings. The CuII cation is sixfold coordinated in a slightly distorted octahedral environment by two trans, equatorial, anionic isatin derivatives and two trans pyridine ligands in axial positions. The complexes are linked by hydrogen bonding into a three-dimensional network, which is also stabilized by π–π stacking interactions [centroid-to-centroid distance = 3.7352 (9) Å] and C—H...π contacts. The Hirshfeld surface analysis indicates that the major contributions for the crystal packing are H...H (31.80%), H...C (24.30%), H...O (15.20%) and H...F (10.80%). This work is the second report in the literature of a crystal structure of a coordination compound with isatin 3-oxime ligands (coordination chemistry).


2020 ◽  
Vol 76 (8) ◽  
pp. 1369-1372
Author(s):  
Abdessalem Badri ◽  
Inmaculada Alvarez-Serrano ◽  
María Luisa López ◽  
Mongi Ben Amara

Na2.22Mn0.87In1.68(PO4)3, sodium manganese indium tris(phosphate) (2.22/0.87/1.68), was obtained in the form of single crystals by a flux method and was structurally characterized by single-crystal X-ray diffraction. The compound belongs to the alluaudite structure type (space group C2/c) with general formula X(2)X(1)M(1)M(2)2(PO4)3. The X(2) and X(1) sites are partially occupied by sodium [occupancy 0.7676 (17) and 1/2] while the M(1) and M(2) sites are fully occupied within a mixed distribution of sodium/manganese(II) and manganese(II)/indium, respectively. The three-dimensional anionic framework is built up on the basis of M(2)2O10 dimers that share opposite edges with M(1)O6 octahedra, thus forming infinite chains extending parallel to [10\overline{1}]. The linkage between these chains is ensured by PO4 tetrahedra through common vertices. The three-dimensional network thus constructed delimits two types of hexagonal channels, resulting from the catenation of M(2)2O10 dimers, M(1)O6 octahedra and PO4 tetrahedra through edge- and corner-sharing. The channels are occupied by Na+ cations with coordination numbers of seven and eight.


2019 ◽  
Vol 75 (7) ◽  
pp. 1001-1004 ◽  
Author(s):  
Bougar Sarr ◽  
Abdou Mbaye ◽  
Wally Diallo ◽  
Cheikh Abdoul Khadir Diop ◽  
Mamadou Sidibe ◽  
...  

The title compound, hexakis(2-methyl-1H-imidazol-3-ium) heptamolybdate 2-methyl-1H-imidazole disolvate dihydrate, (C4H7N2)6[Mo7O24]·2C4H6N2·2H2O, was prepared from 2-methylimidazole and ammonium heptamolybdate tetrahydrate in acid solution. The [Mo7O24]6− heptamolybdate cluster anion is accompanied by six protonated (C4H7N2)+ 2-methylimidazolium cations, two neutral C4H6N2 2-methylimidazole molecules and two water molecules of crystallization. The cluster consists of seven distorted MoO6 octahedra sharing edges or vertices. In the crystal, the components are linked by N—H...N, N—H...O, O—H...O, N—H...(O,O) and O—H...(O,O) hydrogen bonds, generating a three-dimensional network. Weak C—H...O interactions consolidate the packing.


Author(s):  
Elhassan Benhsina ◽  
Jamal Khmiyas ◽  
Said Ouaatta ◽  
Abderrazzak Assani ◽  
Mohamed Saadi ◽  
...  

Single crystals of sodium copper(II) indium bis[phosphate(V)], NaCuIn(PO4)2, were grown from the melt under atmospheric conditions. The title phosphate crystallizes in the space group P21/n and is isotypic with KCuFe(PO4)2. In the crystal, two [CuO5] trigonal bipyramids share an edge to form a dimer [Cu2O8] that is connected to two PO4 tetrahedra. The obtained [Cu2P2O12] units are interconnected through vertices to form sheets that are sandwiched between undulating layers resulting from the junction of PO4 tetrahedra and [InO6] octahedra. The two types of layers are alternately stacked along [101] and are joined into a three-dimensional framework through vertex- and edge-sharing, leaving channels parallel to the stacking direction. The channels host the sodium cations that are surrounded by four oxygen atoms in form of a distorted disphenoid.


2011 ◽  
Vol 66 (11) ◽  
pp. 1087-1091 ◽  
Author(s):  
Olaf Reckeweg ◽  
Francis J. DiSalvo

Colorless and transparent single crystals of Ba2H3I were obtained by reacting Ba with dried and sublimed NH4I in a 4 : 1 molar ratio in silica-jacketed Nb ampoules at 1100 K for 13 h. The crystal structure of the title compound was determined and refined by means of single-crystal X-ray diffraction. Ba2H3I crystallizes in a stuffed anti-CdI2 structure isotypic to Sr2H3I in the space group P3̄m1 (no. 164) with the lattice parameters a = 451.86(12) and c = 811.84(23) pm. The structural results for Ba2H3I are consistent with bond lengths and coordination geometries of related binary and ternary hydrides


1997 ◽  
Vol 52 (8) ◽  
pp. 901-905 ◽  
Author(s):  
Vera V Ponomareva ◽  
Victor V Skopenko ◽  
Konstantin V Domasevitch ◽  
Joachim Sieler ◽  
Thomas Gelbrich

Abstract The caesium hydrogen benzoylcyanoximate (L-) complex with 18-crown-6 of composition Cs(18-crown-6){H(L)2} has been prepared and studied by means of X-ray diffraction [monoclinic, space group P21/n, with a = 9.906(1), b = 18.387(3), c = 18.855(3)Å, β = 90.13(1)°, V = 3434.3(9) Å, Z = 4; final R1 = 0.043 for the 6431 independent reflections used. The lattice consists of Cs(18-crown-6)+ cations and complex hydrogen oximate anions {H(L)2}-, formed via strong hydrogen bonding between the oxygen atoms of nitroso-groups [O - - - O ca. 2.456(5)Å]. The caesium atom deviates by 1.492(3) Å from the mean plane of the oxygen atoms of the macrocyclic ether (dominant orientation of disordered ligand, 60%) and adopts a typical “sunrise coordination” [Cs-O (ether) 3.040(9)-3.312(7) Å]. The hydrogen oximate groups are bonded to the metal center only on one side of the crown ether plane via the oxygen atoms of nitroso-groups and the nitrogen atoms of cyano groups (Cs-O ca. 3.040(9), 3.312(7) Å; Cs-N ca. 3.469(5), 3.679(6) Å). The coordination polyhedron of Cs+ can be described as a distorted bicapped tetragonal prism.


1997 ◽  
Vol 52 (7) ◽  
pp. 790-794 ◽  
Author(s):  
Klaus Megges ◽  
Evgeni V. Avtomonov ◽  
Jörg Lorberth

Abstract 1,2,3,4-Tetrakis(t-butyl)tetraarsetane (t-C4H9As)4(4) has been synthesized by reduction of t-butylarsenic (III) diiodide (1) with equivalent quantities of either Mg, Ca, Zn, Li, or CoCp2 in THF at low temperatures in high yields. Treatment of 1 with CoCp2 in a molar ratio 1:1 in n-pentane at -78 °C leads to the formation of 1,2-di-t-butyl-1,2-diiododiarsine (2) (t-C4H9AsI)2 in 69 % yield. The products have been characterized by spectroscopic methods (H, 13C-NMR, EI-MS) and elemental analyses. The crystal structure of 2 has been determined by X-ray diffraction methods.


Sign in / Sign up

Export Citation Format

Share Document