Synthesis, Characterization and Crystal Structures of 1,2-Disubstituted Ferrocenyl Stibines

2012 ◽  
Vol 67 (1) ◽  
pp. 36-40
Author(s):  
Diego Pérez ◽  
Pankaj Sharma ◽  
Ana M. Ortiz ◽  
Armando Cabrera ◽  
Simon Hernández ◽  
...  
Keyword(s):  
Solid State ◽  
Acetic Anhydride ◽  
Nucleophilic Substitution ◽  
Sodium Hydroxide ◽  
Crystal Structures ◽  
Analytical Methods ◽  
Molecular Structures ◽  
X Ray ◽  
X Ray Crystallography ◽  
Pendant Arm

New 1,2-disubstituted ferrocenyl stibines containing a -CH2OR pendant arm were synthesized and characterized by various spectral and analytical methods. Nucleophilic substitution of rac-diphenyl[( 2-trimethylammoniomethylferrocen-1-yl)]stibine iodide by methanol produces compound Fc(CH2OMe)SbPh2 (1). The acetylation of diphenyl(2-dimethylaminomethylferrocen-1-yl)stibine by acetic anhydride affords compound Fc(CH2OCOCH3)SbPh2 (2), which on further reaction with sodium hydroxide affords the alcohol Fc(CH2OH)SbPh2 (3). The molecular structures of the stibines 1, 2 and 3 were determined by X-ray crystallography. None of the heterobimetallic compounds containing a -CH2OR arm shows hypervalent interactions in the solid state. By contrast, hypervalent interactions were found in ferrocenyl stibines with a -CH2NR2 pendant arm.

Bis(1-phenyl-1-propyne) complexes of tungsten(II): crystal structures of [WI2(CO)(NCR)(η2-MeC2Ph)2] (R = Me, Et, or Ph)

2001 ◽  
Vol 79 (3) ◽  
pp. 263-271
Author(s):  
Paul K Baker ◽  
Michael GB Drew ◽  
Deborah S Evans
Keyword(s):  
Carbon Monoxide ◽  
Solid State ◽  
Crystal Structures ◽  
Octahedral Geometry ◽  
X Ray ◽  
X Ray Crystallography ◽  
Alkyne Complexes ◽  
First Time

Reaction of [WI2(CO)3(NCMe)2] with two equivalents of 1-phenyl-1-propyne (MeC2Ph) in CH2Cl2, and in the absence of light, gave the bis(1-phenyl-1-propyne) complex [WI2(CO)(NCMe)(η2-MeC2Ph)2] (1) in 77% yield. Treatment of equimolar quantities of 1 and NCR (R = Et, i-Pr, t-Bu, Ph) in CH2Cl2 afforded the nitrile-exchanged products, [WI2(CO)(NCR)(η2-MeC2Ph)2] (2-5) (R = Et (2), i-Pr (3), t-Bu (4), Ph (5)). Complexes 1, 2, and 5 were structurally characterized by X-ray crystallography. All three structures have the same pseudo-octahedral geometry, with the equatorial sites being occupied by cis and parallel alkyne groups, which are trans to the cis-iodo groups. The trans carbon monoxide and acetonitrile ligands occupy the axial sites. In structures 1 and 2, the methyl and phenyl substituents of the 1-phenyl-1-propyne ligands are cis to each other, whereas for the bulkier NCPh complex (5), the methyl and phenyl groups are trans to one another. This is the first time that this arrangement has been observed in the solid state in bis(alkyne) complexes of this type.Key words: bis(1-phenyl-1-propyne), carbonyl, nitrile, diiodo, tungsten(II), crystal structures.

Syntheses, Crystal Structures and Electrochemical Properties of Acetylacetonato-Ruthenium Complexes Containing Substituted Pyridine Ligands

2013 ◽  
Vol 68 (9) ◽  
pp. 993-999 ◽  
Author(s):  
Xiuli Wu ◽  
Rufei Ye ◽  
Ai-Quan Jia ◽  
Qun Chen ◽  
Qian-Feng Zhang
Keyword(s):  
Electrochemical Properties ◽  
Crystal Structures ◽  
Zinc Dust ◽  
Ruthenium Complexes ◽  
Reducing Agent ◽  
Molecular Structures ◽  
X Ray ◽  
X Ray Crystallography ◽  
Crystal And Molecular Structures ◽  
Pyridine Ligands

Treatment of Ru(acac)3 with 2-cyano-pyridine and 3,5-dimethyl-pyridine in the presence of zinc dust as reducing agent in refluxing THF afforded the ruthenium(II) complexes cis-[RuII(acac)2(2- CN-py)2] (1) and cis-[RuII(acac)2(3,5-Me2-py)2] (2), respectively. Interaction of Ru(acac)3 with 3- Me-pyridine and 3,5-Me2-pyridine in the presence of Br2 in refluxing THF gave the ruthenium(III) complexes [RuIII(acac)Br2(3-Me-py)2] (3) and [RuIII(acac)Br2(3,5-Me2-py)2] (4), respectively. The four complexes have been spectroscopically and electrochemically characterized, and their crystal and molecular structures have been established by X-ray crystallography

Structure and photochemical properties of biindenylidene derivatives in the solid state

2008 ◽  
Vol 2008 (11) ◽  
pp. 647-649
Author(s):  
Xu Li ◽  
Ping Wang ◽  
Jing-jun Liu ◽  
Yong-ming Wang ◽  
Hai Zhu
Keyword(s):  
Solid State ◽  
Crystal Structures ◽  
Organic Radical ◽  
Compound I ◽  
X Ray ◽  
Photochromic Compounds ◽  
X Ray Crystallography ◽  
Photochemical Properties ◽  
Compound Ii

Two photochromic compounds, trans-3,3′-dipentyl-3,3′-dihydroxy-2,2′-bi-1H-indene-1,1′-dione (I), and cis-3,3′-di (2-methylally)-3,3′-dihydroxy-2,2′-bi-1H-indene-1,1′-dione (II), were synthesised and their crystal structures were determined by X-ray crystallography. The photoinduced properties of the compound were studied. The results showed that compound I exhibited reversible photochromism, and at the same time a stable organic radical was generated, while compound II did not show photochemical properties.

Synthesis and molecular structures of N,N-dialkyl-4-nitrosoaniline adducts of formally d6 metalloporphyrins of ruthenium and cobalt

2001 ◽  
Vol 05 (09) ◽  
pp. 702-707 ◽  
Author(s):  
LI CHEN ◽  
JESSE B. FOX ◽  
GEUN-BAE YI ◽  
MASOOD A. KHAN ◽  
GEORGE B. RICHTER-ADDO
Keyword(s):  
Solid State ◽  
Single Crystal ◽  
Molecular Structures ◽  
Spectroscopic Methods ◽  
X Ray ◽  
X Ray Crystallography ◽  
High Yields ◽  
Solid State Structures

Para-aminosubstituted nitrosoarenes react with Ru ( CO )( OEP ) or [ Co ( TPP )( THF )2] SbF 6 (OEP2- = 2,3,7,8,12,13,17,18-octaethylporphyrinato dianion, TPP2- = 5,10,15,20-tetraphenylporphyrinato dianion) to generate Ru ( OEP )( ONC 6 H 4 NMe 2)2 and [ Co ( TPP )( ONC 6 H 4 NR 2)2] SbF 6 ( R = Me , Et ), respectively, in fair to high yields. These N -bound nitrosoarene complexes have been characterized by spectroscopic methods. The complexes Ru ( OEP )( ONC 6 H 4 NMe 2)2 and [ Co ( TPP )( ONC 6 H 4 NMe 2)2] ClO 4 have also been characterized by single-crystal X-ray crystallography. Their structures represent the first reported solid-state structures of Ru and Co porphyrins containing C-nitroso ligands.

scholarly journals Synthesis and molecular structures of monooxo aryl complexes of osmium(VI)

2001 ◽  
Vol 79 (5-6) ◽  
pp. 607-612 ◽  
Author(s):  
Man-Kit Lau ◽  
Joyce LC Chim ◽  
Wing-Tak Wong ◽  
Ian D Williams ◽  
Wa-Hung Leung
Keyword(s):  
Solid State ◽  
Molecular Structures ◽  
Cyclic Voltammograms ◽  
Apical Position ◽  
Space Group ◽  
X Ray ◽  
X Ray Crystallography ◽  
Aryl Complexes ◽  
Oxo Ligand ◽  
Solid State Structures

Reaction of [OsO4] with C7H7MgBr (C7H7 = 2-methylphenyl) followed by column chromatography afforded the reported osmium tetraaryl [Os(C7H7)4] along with the oxo-osmium(VI) ([OsO(C7H7)4]) (1) (13%) and the dioxo-osmium(VI) ([OsO2(C7H7)2]) (2) (25%) complexes. Treatment of [OsO4] with C8H9MgBr (C8H9 = 2,5-dimethylphenyl) gave a mixture of [Os(C8H9)4] (3) (34%) and [OsO(C8H9)4] (4) (4%) while that with C8H9OMgBr (C8H9O = 4-methoxy-2-methylphenyl) afforded [OsO(C8H9O)4] (5) in 20% yield. Oxidation of 3 with 3-chloroperoxybenzoic acid afforded 4 in good yield. The solid-state structures of 1 and 4 have been established by X-ray crystallography. Crystals of 1 are tetragonal with a = 13.080(1) and c = 6.6506(5) Å, V = 1137.9(1) Å3, Z = 2, and space group of P4/n; while those of 4 are tetragonal with a = 13.593(2) and c = 7.377(2) Å, V = 1363.0(5) Å3, Z = 4, and space group of P4/n. The geometry around osmium in both complexes is square pyramidal with the oxo ligand occupying apical position. The Os—O and Os—C distances in 1 are 1.652(2) and 2.084(1) Å, respectively, while those in 4 are 1.688(7) and 2.088(4) Å, respectively. The cyclic voltammograms of the monooxo aryl osmium(VI) compounds show reversible Os(VI/V) couple at around –1.4 V vs. ferrocene/ferrocenium couple.Key words: osmium(VI), oxo aryl complexes.

Synthesis and characterization of [MII(bqb)] (M = Co, Ni, Cu), [N(n-Bu)4][CoIII(bqb)(CN)2], and [N(n-Bu)4][CoIII(bqb)(N3)2] containing deprotonated N,N'-bis(2-quinolinecarboxamide)-1,2-benzene (bqb) – X-ray crystal structures of [NiII(bqb)] and [N(n-Bu)4][CoIII(bqb)(N3)2]

2006 ◽  
Vol 84 (7) ◽  
pp. 971-978 ◽  
Author(s):  
Soria Meghdadi ◽  
Mehdi Amirnasr ◽  
Vratislav Langer ◽  
Alison Zamanpoor
Keyword(s):  
Crystal Structures ◽  
Molecular Structures ◽  
Monoclinic Space Group ◽  
Space Group ◽  
X Ray ◽  
X Ray Crystallography ◽  
H Nmr ◽  
Square Planar ◽  
Distorted Octahedral ◽  
Elemental Analyses

Cobalt(II), nickel(II), copper(II), and two cobalt(III) complexes of a new dianionic ligand, bqb, [H2bqb = N,N'-bis(2-quinolinecarboxamide)-1,2-benzene] have been synthesized and characterized by elemental analyses, IR, and 1H NMR spectroscopy. The crystal and molecular structures of the [Ni(bqb)] (2) and [N(n-Bu)4][CoIII(bqb)(N3)2] (5) complexes were determined by X-ray crystallography. Complex 2 crystallizes in the monoclinic space group C2/c with a distorted square-planar structure including two short Ni–N (1.848 Å) and two long Ni–N (1.958 Å) bonds. The structure consists of sheets formed in the plane parallel to the b axis and diagonal to vectors a and c by intermolecular hydrogen bonds. Complex 5 crystallizes in the monoclinic space group C2 with a distorted octahedral structure. The [N(n-Bu)4]+ ion is disordered at the C3A and C4A atoms of one Bu. The IR and 1H NMR spectra of the complexes are also discussed.Key words: N4-dianionic amido ligand (bqb), (bqb) complexes of Co(II), Ni(II), Cu(II), and Co(III), azide, cyanide, X-ray crystal structures.

On the importance of antiparallel π–π interactions in the solid state of isatin-based hydrazides

2019 ◽  
Vol 43 (21) ◽  
pp. 8122-8131 ◽  
Author(s):  
Muhammad Naeem Ahmed ◽  
Maryam Arif ◽  
Farah Jabeen ◽  
Haroon Ahmed Khan ◽  
Khawaja Ansar Yasin ◽  
...  
Keyword(s):  
Solid State ◽  
Dft Calculations ◽  
Crystal Structures ◽  
X Ray ◽  
Π Interactions ◽  
X Ray Crystallography ◽  
Isatin Derivatives

Cooperative H-bonding and antiparallel π–π interactions in crystal structures of isatin derivatives are investigated using X-ray crystallography and DFT calculations.

Synthesis, characterization, and single crystal X-ray structures of [CoIII(acacen)(thioacetamide)2]ClO4 and [CoIII((BA)2en)(thioacetamide)2]PF6 — Solvatochromic properties of [CoIII(acacen)(thioacetamide)2]ClO4

2005 ◽  
Vol 83 (12) ◽  
pp. 2073-2081 ◽  
Author(s):  
Mehdi Amirnasr ◽  
Vratislav Langer ◽  
Nahid Rasouli ◽  
Mehdi Salehi ◽  
Soraia Meghdadi
Keyword(s):  
Solid State ◽  
Molecular Structures ◽  
Axial Position ◽  
Monoclinic Space Group ◽  
Solid State Method ◽  
X Ray ◽  
X Ray Crystallography ◽  
H Nmr ◽  
Ligand Charge Transfer ◽  
Wavelength Absorption

The trans-[CoIII(acacen)(ta)2]ClO4 (1) and trans-[CoIII((BA)2en)(ta)2]PF6 (2) complexes, where H2acacen = bis(acetylacetone)ethylenediimine, H2(BA)2en = bis(benzoylacetone)ethylenediimine, and ta = thioacetamide, have been synthesized by a solid-state method, and characterized by elemental analyses, IR, UV–vis, and 1H NMR spectroscopy. The crystal and molecular structures of 1 and 2 were determined by X-ray crystallography. Both compounds crystallize in the monoclinic space group P2/n. The ClO4 and PF6 ions are both disordered, ClO4 on a twofold axis in 1 and PF6 on an inversion center in 2. Also bridging N-CH2-CH2-N is disordered in both compounds. The octahedral coordination of Co(III) is slightly distorted in both cases. The thioacetamide ligands are S-bonded and occupy the axial position. The IR, UV–vis, and 1H NMR spectra of the two complexes and their solvatochromic properties are also discussed. The longest wavelength absorption that appears at 517 nm for 1 and at 528 nm for 2 in chloroform is solvent dependent, and is assigned as a metal-mediated ligand-to-ligand charge transfer (LLCT).Key words: solid-state synthesis, thioactamide, Co(III) (Schiff base), crystal structure, solvatochromism, metal-mediated LLCT.

Tautomérie du 2,5-dimercapto-1,3,4-thiadiazole et synthèse de thiadiazoloacridiniques

1995 ◽  
Vol 73 (8) ◽  
pp. 1258-1266 ◽  
Author(s):  
Pascale Amiel ◽  
Abdallah Mahamoud ◽  
Pierre Brouant ◽  
Jean Pierre Galy ◽  
Jacques Barbe ◽  
...  
Keyword(s):  
Solid State ◽  
Nmr Spectroscopy ◽  
Sodium Salt ◽  
Tautomeric Equilibrium ◽  
Molecular Structures ◽  
Starting Material ◽  
X Ray ◽  
X Ray Crystallography

Some 2(3H)-thione-5-alkylthio-1,3,4-thiadiazoles were prepared with a view to arylating these compounds with 9-chloroacridines. Using pyridine as solvent and base, this arylation led to the 2-thione-(N)3-acridinyl-5-alkylthio-1,3,4-thiadiazoles. Molecular structures of the latter were determined either by NMR spectroscopy or by referring to X-ray crystallography of the 5-(diethylaminoethylthio)-1,3,4-thiadiazole-2-thione. Thus, with respect to the tautomeric equilibrium of the compound investigated, the thione group was detected either in the solid state or in solution. In contrast, 2-acridinylthio-5-alkylthio-1,3,4-thiadiazoles were prepared by using the sodium salt of 2-mercapto-5-alkylthio-1,3,4-thiadiazoles as starting material. Keywords: acridines, thiadiazoles, tautomerism.

Sign in / Sign up

Export Citation Format

Share Document