Production of nanocrystalline cellulose from bleached soda bagasse pulp

BioResources ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. 7817-7829
Author(s):  
Sabah Ashrafi Birgani ◽  
Mohammad Talaeipour ◽  
Amir Hooman Hemmasi ◽  
Behzad Bazyar ◽  
Kambiz Larijani
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fourier Transform ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Dialysis Bag ◽  
Bagasse Pulp ◽  
Scanning Electron

The cellulose used in this study was prepared from bleached soda bagasse obtained from the Pars paper factory. To prepare nanocellulose, the sample was subjected to alkaline pretreatment and then acid hydrolysis using 54% sulfuric acid at several temperatures (35, 50, 60, and 65 °C) and different times (30, 60, 90, and 120 min). Then, they were prepared using a centrifuge, dialysis bag, ultrasound, and freezer, respectively. The produced nanocellulose was characterized by transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). According to the results, temperatures of 50 and 90 °C were selected for the preparation of nanocellulose. The crystallization index of the hydrolyzed pulp and produced nanocellulose was 53 and 61%, respectively. The produced nanocellulose had a fibrillar shape.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Influence of Salt Aid on Combustion Synthesis of Nanocrystalline CeO2 Powders

2011 ◽  
Vol 412 ◽  
pp. 5-8 ◽  
Author(s):  
Ying Zhang ◽  
Ai Chen ◽  
Hai Rong Wang ◽  
Ze Song Li ◽  
Ying Ping Shen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Combustion Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Characteristics ◽  
Transmission Electron ◽  
Nanocrystalline Ceria ◽  
Scanning Electron

The present article reports the results of studies related to the synthesis of nanocrystalline ceria powder by combustion process using salt combustion aid. Cerium nitrate as oxidant and urea as fuel were used as reagents, Sodium Chloride was compared as combustion aid. The phase analysis and particle size were compared. The product was characterized by X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy. The results showed that employment of starting fuel with combustion aid resulted in synthesizing nanocrystalline ceria powder with fine agglomerates. By using combustion aid, the energetics of the combustion reaction and particle characteristics have been changed.

Analyse des Stuckgipses der Abtei Villers / Analysis of Stucco from the Abbey of Villers

1997 ◽  
Vol 3 (4) ◽  
pp. 381-396
Author(s):  
S. Chandra ◽  
D. Van Gemert
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Analysis ◽  
Electron Spectroscopy ◽  
Natural Polymer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Abstract Interior plaster from the Abbot's Palace of the Abbey of Villers-la-Ville, Brabant Wallon province, Belgium has been investigated. It is done by using chemical analysis, x-ray diffraction analysis, scanning electron microscopy, energy dispersive electron spectroscopy, and transmission electron microscopy. It is found that the rendering was made with lime rich mortar and animal hairs. The sand used was very fine and the hairs were very short. The solid constituents and the hairs were uniformly dispersed, which could have been obtained by the addition of some other natural polymer, containing protein.

Study of Hydrothermal Synthesis of Ce0.67Zr0.33O2 Nanorods and Catalytic Property to CO

2011 ◽  
Vol 347-353 ◽  
pp. 615-620
Author(s):  
Ying Jia ◽  
Tian Tian Liu ◽  
Cheng Luo
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Catalytic Oxidation ◽  
Zirconium Oxychloride ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Three Way Catalyst ◽  
Scanning Electron

Ce0.67Zr0.33O2 (CZ) nanorods are successfully synthesized by glycol-assisted hydrothermal method using zirconium oxychloride, cerium nitrate and urea, with the presence of sodium hypochlorite. The products are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectra. The catalytic oxidation characters about Pd/CZ three-way catalyst (TWC) prepared with different loads of Pd are also investigated. The results show that the as-prepared Pd/CZ has excellent catalytic oxidation character to CO.

Synthesis of ZnO with Different Morphology and its Photocatalytic Property

2011 ◽  
Vol 110-116 ◽  
pp. 547-552 ◽  
Author(s):  
Yu Xin Wang ◽  
Jing Xu ◽  
Xing Guo Cheng ◽  
Hong Fang Xu ◽  
Li Jun Liu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photocatalytic Property ◽  
Zno Nanostructures ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Zno Nanomaterials ◽  
Scanning Electron

ZnO nanostructures with different morphology have been successfully fabricated by a simple relative low temperature approach at 90 °C for 5 h without surfactant assistance. These structures can be easily tailed using varied concentrations of sodium hydroxide (NaOH) and different amounts of the hydrazine hydrate (N2H4·H2O). X-ray diffraction (XRD) result proves the formation of ZnO with wurtzite structure. Microstructure as revealed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicates that the rod-like and chrysanthemum-like ZnO nanostructures contain many radial nanorods, which grow along the [0001] direction. Furthermore, the as-prepared ZnO nanomaterials exhibit high activity on the photo-catalytic degradation of typical persistent organic pollutants (POPs), indicating that they are promising as semiconductor photo-catalysts.

Fabrication of g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts for enhanced photocatalytic activity

2021 ◽  
Author(s):  
SongSik Pak ◽  
KwangChol Ri ◽  
Chenmin Xu ◽  
Qiuyi Ji ◽  
Dunyu Sun ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Photocatalytic Activity ◽  
Electron Microscope ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

The g-C3N4/Y-TiO2 Z-scheme heterojunction photocatalysts were successfully synthesized. The powder X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscope, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy were used for...

Nanostructured CaWO4, CaWO4:Eu3+ and CaWO4:Tb3+ Particles: Sonochemical Synthesis and Luminescent Properties

2008 ◽  
Vol 8 (3) ◽  
pp. 1183-1190 ◽  
Author(s):  
Chunxia Li ◽  
Cuikun Lin ◽  
Xiaoming Liu ◽  
Jun Lin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Field Emission ◽  
Spherical Particles ◽  
X Ray Diffraction ◽  
Blue Emission Band ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Nanostructured CaWO4, CaWO4:Eu3+, and CaWO4:Tb3+ phosphor particles were synthesized via a facile sonochemical route. X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, photoluminescence, low voltage cathodoluminescence spectra, and photoluminescence lifetimes were used to characterize the as-obtained samples. The X-ray diffraction results indicate that the samples are well crystallized with the scheelite structure of CaWO4. The transmission electron microscopy and field emission scanning electron microscopy images illustrate that the powders consist of spherical particles with sizes from 120 to 160 nm, which are the aggregates of even smaller nanoparticles ranging from 10 to 20 nm. Under UV light or electron beam excitation, the CaWO4 powder exhibited a blue emission band with a maximum at 430 nm originating from the WO2−4 groups, while the CaWO4:Eu3+ powder showed red emission dominated by 613 nm ascribed to the 5D0 → 7F2 of Eu3+, and the CaWO4:Tb3+ powders showed emission at 544 nm, ascribed to the 5D4 → 7F5 transition of Tb3+. The PL excitation and emission spectra suggest that the energy is transferred from WO2−4 to Eu3+CaWO4:Eu3+ and to Tb3+ in CaWO4:Tb3+. Moreover, the energy transfer from WO2−4 to Tb3+ in CaWO4:Tb3+ is more efficient than that from WO2−4 to Eu3+ in CaWO4:Eu3+. This novel and efficient pathway could open new opportunities for further investigating the novel properties of tungstate materials.

INFLUENCE OF AMMONIATING TIME ON Nb-CATALYZED GaN NANOSTRUCTURED MATERIALS

2011 ◽  
Vol 10 (06) ◽  
pp. 1209-1214 ◽  
Author(s):  
HUIZHAO ZHUANG ◽  
JIE WANG ◽  
XIAOKAI ZHANG ◽  
JUNLIN LI
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nanostructured Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Turn On ◽  
Transmission Electron ◽  
Morphology And Structure ◽  
Scanning Electron

Gallium nitride ( GaN ): nanostructured materials are synthesized by ammoniating Ga2O3/Nb films which are deposited in turn on Si(111) substrates at 900°C. The morphology and structure of the nanostructured materials are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Optical property of GaN nanostructured materials are analyzed by photoluminescence (PL). The results demonstrated that as-synthesized nanostructured materials are hexagonal wurtzite-structured. Ammoniating time of the samples has an evident influence on the morphology of GaN nanostructured materials synthesized by this method. The PL spectra indicate good emission property for the nanostructured materials. Finally, the growth mechanism is also briefly discussed.

STUDY OF HYDROTHERMAL SYNTHESIS AND PROPERTIES OF Bi2Fe4O9

2010 ◽  
Vol 03 (03) ◽  
pp. 173-176 ◽  
Author(s):  
YIBO WANG ◽  
HUAJUN SUN ◽  
JING ZHOU ◽  
BO LI ◽  
CHENGYONG ZHANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Phase Transformation ◽  
Dielectric Properties ◽  
X Ray Diffraction ◽  
Impedance Analyzer ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Highly oriented Bi2Fe4O9 nanosheets can be fabricated with Fe(NO3)3 ⋅ 9H2O and Bi(NO3)3 ⋅ 5H2O using the low-temperature hydrothermal method. The as-prepared powders are characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM), which exhibit an excellent orientation along the (00l) planes. The leakage current density and dielectric properties of the nanosheet samples are measured by Radiant Precision Workstation and HP4291B Impedance Analyzer, respectively. The effects of NaOH concentration on the phase transformation, sheet size and morphologies of the Bi2Fe4O9 crystallites are studied in this paper.

Mesoporous TiO2 Prepared by Using Lac Red as Template：Synthesis, Characterization, and Adsorption of Gaseous Acetaldehyde

2013 ◽  
Vol 742 ◽  
pp. 448-451
Author(s):  
Ming Feng Wang ◽  
Tou Gen Liao ◽  
Bao Kun Zhu ◽  
Yao Wang ◽  
Yan Qing Duan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Mesoporous Titania ◽  
X Ray Diffraction ◽  
High Adsorption ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorption Desorption ◽  
Scanning Electron

Mesoporous TiO2 with anatase crystalline structure (MTiO2) has been synthesized by using Lac Red as template. The synthesized mesoporous titania samples were characterized by a combination of various physicochemical techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), N2 adsorption/desorption. It was found that without any external doping MTiO2 exhibited significant high adsorption abilities for adsorbing the gaseous acetaldehyde by the adsorption ratio of 39.15%.

Sign in / Sign up

Export Citation Format

Share Document