scholarly journals Investigation of the microstructure and hardness of experimental rail steels in the cast state, after hot plastic deformation and heat treatment

2021 ◽  
Vol 29 (1) ◽  
pp. 81-86
Author(s):  
O.I. Babachenko ◽  
◽  
G.A. Kononenko ◽  
R.V. Podolskyi ◽  
O.A. Safronova ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Plastic Deformation ◽  
Cast State ◽  
Hot Plastic Deformation ◽  
Deformation And Heat Treatment

Deformation and Heat Treatment of Cold Drawn Gold

2007 ◽  
Vol 550 ◽  
pp. 289-294
Author(s):  
Suk Hoon Kang ◽  
Jae Hyung Cho ◽  
Joon Sub Hwang ◽  
Jong Soo Cho ◽  
Yong Jin Park ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Plastic Deformation ◽  
Mechanical Stability ◽  
Ion Beam ◽  
Quantitative Measure ◽  
Electron Backscattered Diffraction ◽  
Conducting Path ◽  
Deformation And Heat Treatment ◽  
Gold Wires

Cold drawn gold wires are widely applied in electronic packaging process to interconnect micro-electronic components. They basically provides a conducting path for electronic signal transfer, and experience thermo-mechanical loads in use. The mechanical stability of drawn gold wires is a matter of practical concern in the reliable functioning of electronic devices. It is known that mechanical properties of materials are deeply related to the microstructure. With appropriate control of deformation and heat processes, the mechanical properties of final products, such as tensile strength and elongation can be improved. Severe plastic deformation by torsion usually contributes to grain refinement and increment of strength. In this study, microstructure variations with torsion strain followed by drawing and heat treatment were investigated. Analyses by focused ion beam (FIB) and electron backscattered diffraction (EBSD) were carried out to characterize the effect of deformation and heat treatment on the drawn gold wires. Pattern quality of EBSD measurements was used as a quantitative measure for plastic deformation.

scholarly journals The Effect of Severe Plastic Deformation and Heat Treatment on CuCrZr Alloys

2017 ◽  
Vol 131 (5) ◽  
pp. 1336-1340 ◽  
Author(s):  
A. Kováčová ◽  
T. Kvačkaj ◽  
R. Kočiško ◽  
L. Dragošek ◽  
L. Lityńska-Dobrzyńska
Keyword(s):  
Heat Treatment ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Deformation And Heat Treatment

Magnetic Properties of Nanocrystalline (Nd,R)-(Fe,Co)-B (R = Pr, Ho) Alloys after Melt Spinning, Severe Plastic Deformation and Heat Treatment

2020 ◽  
Vol 312 ◽  
pp. 235-243
Author(s):  
Lev Aleksandrovich Ivanov ◽  
Tatiana P. Kaminskaya ◽  
Irina Semenovna Tereshina ◽  
Vladislav Davydov ◽  
Vladimir V. Popov ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Plastic Deformation ◽  
Severe Plastic Deformation ◽  
Melt Spinning ◽  
Magnetic Hysteresis ◽  
Hysteresis Loops ◽  
Nanocrystalline State ◽  
Force Microscopy ◽  
Atomic Force ◽  
Deformation And Heat Treatment

Magnetic force microscopy (MFM) and magnetometry, scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used to study the magnetic and structural properties of the (Nd,Pr)-Fe–B and (Nd,Ho)-(Fe,Co)-B alloys. The alloys are synthesized using an arc or induction furnaces. The nanocrystalline state of the (Nd,Ho)-(Fe,Co)-B alloys is reached by two techniques, namely, melt spinning (MS) and severe plastic deformation (SPD). Hydrogenation and multistage treatment of (Nd,Ho)-(Fe,Co)-B alloys, which includes severe plastic deformation of melt-quenched ribbons and subsequent heat treatment, is also used. The surface morphology and domain structure of samples are studied. These pictures are used to interpret the observed magnetic hysteresis loops of the samples. It was found that multistage treatment allows one to obtain samples with higher values of coercivity due to the formation of a special microstructure with oval grain (the aspect ratio equal to ∼ 3).

scholarly journals INVESTIGATION OF HOT PLASTIC DEFORMATION OF LABORATORY AXIAL FLOATS

2021 ◽  
pp. 12-16
Author(s):  
Oleksandr Babachenko ◽  
Ganna Kononenko ◽  
Katerina Domina ◽  
Rostislav Podolskyi ◽  
Olena Safronova
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Plastic Deformation ◽  
Chemical Composition ◽  
Physical And Mechanical Properties ◽  
Pressure Treatment ◽  
Initial Length ◽  
Hot Plastic Deformation ◽  
The Impact ◽  
Further Development

A review of research in the field of modeling experiments on heat treatment and pressure treatment of metal and the impact on the physical and mechanical properties of steel with a chemical composition of 0.59% C, 0.31% Si, 0.73% Mn. A mathematical model for calculating the physical and mechanical properties of steel in the process of hot plastic deformation has been developed and prospects for further development of research in this area have been identified. As a result of modeling, the following functions were obtained: the amount of deformation in the direction of the applied force divided by the initial length of the material. The coefficient of elongation of the material with the actual chemical composition at a temperature of 1250 ± 10 ° C, which was 0.32. When comparing the values of the load that was applied to the GPA in the laboratory and the results of calculations using the developed model, it was found that they have close values of about 45 MPa. This confirms the adequacy of the obtained model.A review of research in the field of modeling experiments on heat treatment and pressure treatment of metal and the impact on the physical and mechanical properties of steel with a chemical composition of 0.59% C, 0.31% Si, 0.73% Mn. A mathematical model for calculating the physical and mechanical properties of steel in the process of hot plastic deformation has been developed and prospects for further development of research in this area have been identified. As a result of modeling, the following functions were obtained: the amount of deformation in the direction of the applied force divided by the initial length of the material. The coefficient of elongation of the material with the actual chemical composition at a temperature of 1250 ± 10 ° C, which was 0.32. When comparing the values of the load that was applied to the GPA in the laboratory and the results of calculations using the developed model, it was found that they have close values of about 45 MPa. This confirms the adequacy of the obtained model.

Sign in / Sign up

Export Citation Format

Share Document