Numerical Investigation of Water Blockage in Secondary Fractures and Apparent Permeability Modeling in Shale Gas Production

Author(s):  
Chuanyao Zhong ◽  
Juliana Y. Leung
Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Mingyao Wei ◽  
Jishan Liu ◽  
Derek Elsworth ◽  
Enyuan Wang

Shale gas reservoir is a typical type of unconventional gas reservoir, primarily because of the complex flow mechanism from nanoscale to macroscale. A triple-porosity model (M3 model) comprising kerogen system, matrix system, and natural fracture system was presented to describe the multispace scale, multitime scale, and multiphysics characteristic of gas flows in shale reservoir. Apparent permeability model for real gas transport in nanopores, which covers flow regime effect and geomechanical effect, was used to address multiscale flow in shale matrix. This paper aims at quantifying the shale gas in different scales and its sequence in the process of gas production. The model results used for history matching also showed consistency against gas production data from the Barnett Shale. It also revealed the multispace scale process of gas production from a single well, which is supplied by gas transport from natural fracture, matrix, and kerogen sequentially. Sensitivity analysis on the contributions of shale reservoir permeability in different scales gives some insight as to their importance. Simulated results showed that free gas in matrix contributes to the main source of gas production, while the performance of a gas shale well is strongly determined by the natural fracture permeability.


SPE Journal ◽  
2014 ◽  
Vol 19 (06) ◽  
pp. 1110-1125 ◽  
Author(s):  
Jihoon Kim ◽  
George J. Moridis

Summary We investigate coupled flow and geomechanics in gas production from extremely low-permeability reservoirs such as tight- and shale-gas reservoirs, using dynamic porosity and permeability during numerical simulation. In particular, we take the intrinsic permeability as a step function of the status of material failure, and the permeability is updated every timestep. We consider gas reservoirs with the vertical and horizontal primary fractures, using the single- and dynamic double-porosity (dual-continuum) models. We modify the multiple-porosity constitutive relations for modeling the double porous continua for flow and geomechanics. The numerical results indicate that the production of gas causes redistribution of the effective-stress fields, increasing the effective shear stress and resulting in plasticity. Shear failure occurs not only near the fracture tips but also away from the primary fractures, which indicates the generation of secondary fractures. These secondary fractures increase the permeability significantly, and change the flow pattern, which, in turn, causes a change in the distribution of geomechanical variables. From various numerical tests, we find that shear failure is enhanced by a large pressure drop at the production well, a high Biot's coefficient, and low frictional and dilation angles. Smaller spacing between the horizontal wells also contributes to faster secondary fracturing. When the dynamic double-porosity model is used, we observe a faster evolution of the enhanced-permeability areas than that obtained from the single-porosity model, mainly because of a higher permeability of the fractures in the double-porosity model. These complicated physics for stress-sensitive reservoirs cannot properly be captured by the uncoupled or flow-only simulation, and, thus, tightly coupled flow and geomechanical models are highly recommended to describe accurately the reservoir behavior during gas production in tight- and shale-gas reservoirs and to design production scenarios smartly.


2019 ◽  
Vol 11 (1) ◽  
pp. 948-960 ◽  
Author(s):  
Asadullah Memon ◽  
Aifen Li ◽  
Wencheng Han ◽  
Weibing Tian

Abstract Shale, a heterogeneous and extremely complex gas reservoir, contains low porosity and ultra-Low permeability properties at different pore scales. Its flow behaviors are more complicated due to different forms of flow regimes under laboratory conditions. Flow regimes change with respect to pore scale variation resulting in change in gas permeability. This work presents new insights regarding the change of pore radius due to gas adsorption, effective stress and impact of both on shale gas permeability measurements in flow regimes. From this study, it was revealed that the value of Klinkenberg coefficient has been affected due to gas adsorption-induced pore radius thickness impacts and resulting change in gas permeability. The gas permeability measured from new proposed equation is provides better results as compare to existing equation. Adsorption parameters are the key factors that affect radius of shale pore. Both adsorption and effective stress have an effect on the pore radius and result gas permeability change. It was found that slip effect enhances the apparent gas permeability and also changes with effective stress; therefore, combine impact of slip flow and effective stress is very important as provides understanding in evolution of apparent permeability during shale gas production.


Fractals ◽  
2018 ◽  
Vol 26 (06) ◽  
pp. 1850096 ◽  
Author(s):  
WEIPENG FAN ◽  
HAI SUN ◽  
JUN YAO ◽  
DONGYAN FAN ◽  
KAI ZHANG

Duo to different transport mechanisms and gas storage in organic and inorganic systems, a new triple-continuum model coupling Discrete Fracture Model (DFM) was established to investigate gas flow in shale gas reservoir. Considering the multi-scale and heterogeneity of shale matrix, fractal theory was used to calculate the apparent permeability of organic and inorganic systems while multiple gas transport mechanisms such as viscous flow, Knudsen diffusion, surface diffusion, gas absorption/desorption effect and real gas effect were incorporated. This coupled mathematical model was solved by Finite Element Method (FEM) and the presented fractal apparent permeability model was validated with the experimental data. The results show that fractal characteristics of shale matrix have great impact on gas reservoir performance. The model without considering the influence of fractal characteristics could lead to underestimate gas production by approximately 17%. Viscous flow is the dominate transport mechanisms of shale gas and Knudsen diffusion has an impact on gas flow when the pressure declines. Surface diffusion should be only considered in organic systems and can be ignored. Then the results of sensitivity analysis show that the characteristic parameters of inorganic matter have a greater impact than those of organic matter and establishing a triple-continuum model with considering comprehensive effect of organic and inorganic matter is necessary. In addition, gas production would decrease as the pore fractal dimension and tortuosity fractal dimension increase, which results from the increasing number of small pores and more tortuous path for gas flow.


Sign in / Sign up

Export Citation Format

Share Document