scholarly journals Noble Metal Phosphide Electrocatalysts and Their Synchrotron-based X-ray Absorption Spectroscopic

2020 ◽  
pp. 224
Author(s):  
Youkui ZHANG ◽  
Yuzhu ZHOU ◽  
Li SONG
Keyword(s):  
Noble Metal ◽  
Metal Phosphide ◽  
X Ray ◽  
X Ray Absorption

Molecular Characterization of Noble Metal Adsorption at the Water-Aluminum Oxide Interface

2011 ◽  
Vol 396-398 ◽  
pp. 745-750
Author(s):  
Jian Ming Liu ◽  
J. R. Regalbuto
Keyword(s):  
Noble Metal ◽  
Pollution Abatement ◽  
Coordination Complexes ◽  
Metal Adsorption ◽  
Oxide Interface ◽  
X Ray ◽  
Catalysts Preparation ◽  
X Ray Absorption ◽  
Effect Of Surface

We have obtained relatively unambiguous evidence that validates a simple, predictive model describing the uptake of noble metal coordination complexes from aqueous solutions onto oxide surfaces. The results confirm that the metal-oxide interaction is essentially electrostatic in nature. The evidence has been obtained by applying extended x-ray absorption fine structure (EXAFS) analysis to noble metal adsorption systems in which the effect of surface-localized pH has been isolated and quantified. The model has applications ranging from catalysts preparation to heavy metal pollution abatement and precious metal recovery.

Adsorption of 3,4-ethylenedioxythiophene (EDOT) on noble metal surfaces: A photoemission and X-ray absorption study

2009 ◽  
Vol 172 (1-3) ◽  
pp. 114-119 ◽  
Author(s):  
L. Pasquali ◽  
F. Terzi ◽  
M. Montecchi ◽  
B.P. Doyle ◽  
J. Lukkari ◽  
...  
Keyword(s):  
Noble Metal ◽  
Metal Surfaces ◽  
Absorption Study ◽  
X Ray ◽  
X Ray Absorption

High resolution x‐ray absorption spectroscopy of linear hydrocarbons adsorbed on noble metal surfaces

1992 ◽  
Vol 96 (2) ◽  
pp. 1560-1573 ◽  
Author(s):  
H. Rabus ◽  
D. Arvanitis ◽  
M. Domke ◽  
K. Baberschke
Keyword(s):  
High Resolution ◽  
Noble Metal ◽  
Absorption Spectroscopy ◽  
Metal Surfaces ◽  
X Ray ◽  
X Ray Absorption

X-ray microanalysis of thin specimens in the transmission electron microscope at voltages up to 1000 Kv.

1978 ◽  
Vol 36 (1) ◽  
pp. 540-541
Author(s):  
G. Cliff ◽  
M.J. Nasir ◽  
G.W. Lorimer ◽  
N. Ridley
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Weight Fraction ◽  
Present Series ◽  
Constant Independent ◽  
X Ray ◽  
Transmission Electron ◽  
Series Of Experiments ◽  
Image Position ◽  
X Ray Absorption

In a specimen which is transmission thin to 100 kV electrons - a sample in which X-ray absorption is so insignificant that it can be neglected and where fluorescence effects can generally be ignored (1,2) - a ratio of characteristic X-ray intensities, I1/I2 can be converted into a weight fraction ratio, C1/C2, using the equationwhere k12 is, at a given voltage, a constant independent of composition or thickness, k12 values can be determined experimentally from thin standards (3) or calculated (4,6). Both experimental and calculated k12 values have been obtained for K(11<Z>19),kα(Z>19) and some Lα radiation (3,6) at 100 kV. The object of the present series of experiments was to experimentally determine k12 values at voltages between 200 and 1000 kV and to compare these with calculated values.The experiments were carried out on an AEI-EM7 HVEM fitted with an energy dispersive X-ray detector.

SIGMAL: A Program for Calculating L-Shell lonization Cross-Sections

1981 ◽  
Vol 39 ◽  
pp. 198-199 ◽  
Author(s):  
R.F. Egerton
Keyword(s):  
Cross Sections ◽  
Fortran Program ◽  
Absorption Data ◽  
X Ray ◽  
Atomic Electrons ◽  
Energy Dependent ◽  
Hydrogenic Model ◽  
Electron Energy Loss ◽  
X Ray Absorption ◽  
Shell Ionization

SIGMAL is a short (∼ 100-line) Fortran program designed to rapidly compute cross-sections for L-shell ionization, particularly the partial crosssections required in quantitative electron energy-loss microanalysis. The program is based on a hydrogenic model, the L1 and L23 subshells being represented by scaled Coulombic wave functions, which allows the generalized oscillator strength (GOS) to be expressed analytically. In this basic form, the model predicts too large a cross-section at energies near to the ionization edge (see Fig. 1), due mainly to the fact that the screening effect of the atomic electrons is assumed constant over the L-shell region. This can be remedied by applying an energy-dependent correction to the GOS or to the effective nuclear charge, resulting in much closer agreement with experimental X-ray absorption data and with more sophisticated calculations (see Fig. 1 ).

point-Analysis Using the Extrapolation Method in the Analytical Electron microscope

1990 ◽  
Vol 48 (2) ◽  
pp. 430-431
Author(s):  
Zenji Horita ◽  
Ryuzo Nishimachi ◽  
Takeshi Sano ◽  
Minoru Nemoto
Keyword(s):  
Electron Microscope ◽  
Extrapolation Method ◽  
X Ray ◽  
Absorption Correction ◽  
Point Analysis ◽  
Analytical Electron ◽  
Analytical Electron Microscope ◽  
Data Points ◽  
Identical Composition ◽  
X Ray Absorption

Absorption correction is often required in quantitative x-ray microanalysis of thin specimens using the analytical electron microscope. For such correction, it is convenient to use the extrapolation method[l] because the thickness, density and mass absorption coefficient are not necessary in the method. The characteristic x-ray intensities measured for the analysis are only requirement for the absorption correction. However, to achieve extrapolation, it is imperative to obtain data points more than two at different thicknesses in the identical composition. Thus, the method encounters difficulty in analyzing a region equivalent to beam size or the specimen with uniform thickness. The purpose of this study is to modify the method so that extrapolation becomes feasible in such limited conditions. Applicability of the new form is examined by using a standard sample and then it is applied to quantification of phases in a Ni-Al-W ternary alloy.The earlier equation for the extrapolation method was formulated based on the facts that the magnitude of x-ray absorption increases with increasing thickness and that the intensity of a characteristic x-ray exhibiting negligible absorption in the specimen is used as a measure of thickness.

EXELFS Studies of Carbon Fibers

1990 ◽  
Vol 48 (2) ◽  
pp. 72-73
Author(s):  
V. Serin ◽  
K. Hssein ◽  
G. Zanchi ◽  
J. Sévely
Keyword(s):  
Carbon Fibers ◽  
Energy Analysis ◽  
Electron Excitation ◽  
Complex Structures ◽  
High Modulus ◽  
Promising Technique ◽  
X Ray ◽  
Fine Structures ◽  
X Ray Absorption

The present developments of electron energy analysis in the microscopes by E.E.L.S. allow an accurate recording of the spectra and of their different complex structures associated with the inner shell electron excitation by the incident electrons (1). Among these structures, the Extended Energy Loss Fine Structures (EXELFS) are of particular interest. They are equivalent to the well known EXAFS oscillations in X-ray absorption spectroscopy. Due to the EELS characteristic, the Fourier analysis of EXELFS oscillations appears as a promising technique for the characterization of composite materials, the major constituents of which are low Z elements. Using EXELFS, we have developed a microstructural study of carbon fibers. This analysis concerns the carbon K edge, which appears in the spectra at 285 eV. The purpose of the paper is to compare the local short range order, determined by this way in the case of Courtauld HTS and P100 ex-polyacrylonitrile carbon fibers, which are high tensile strength (HTS) and high modulus (HM) fibers respectively.

Improving soil remediation through characterization

1995 ◽  
Vol 53 ◽  
pp. 386-387
Author(s):  
E. C. Buck ◽  
N. L. Dietz ◽  
J. K. Bates
Keyword(s):  
Dust Particles ◽  
Radiochemical Analysis ◽  
Solid Product ◽  
Uranium Contamination ◽  
Physical Separation ◽  
X Ray ◽  
Rocky Flats ◽  
Remediation Strategies ◽  
Bearing Materials ◽  
X Ray Absorption

Operations at former weapons processing facilities in the U. S. have resulted in a large volume of radionuclidecontaminated soils and residues. In an effort to improve remediation strategies and meet environmental regulations, radionuclide-bearing particles in contaminant soils from Fernald in Ohio and the Rocky Flats Plant (RFP) in Colorado have been characterized by electron microscopy. The object of these studies was to determine the form of the contaminant radionuclide, so that it properties could be established [1]. Physical separation and radiochemical analysis determined that uranium contamination at Fernald was not present exclusively in any one size/density fraction [2]. The uranium-contamination resulted from aqueous and solid product spills, air-borne dust particles, and from the operation of an incinerator on site. At RFP the contamination was from the incineration of Pu-bearing materials. Further analysis by x-ray absorption spectroscopy indicated that the majority of the uranium was in the 6+ oxidation state [3].

Chemical and orientational imaging of polymeric samples

1994 ◽  
Vol 52 ◽  
pp. 68-69
Author(s):  
H. Ade ◽  
B. Hsiao ◽  
G. Mitchell ◽  
E. Rightor ◽  
A. P. Smith ◽  
...  
Keyword(s):  
Ethylene Terephthalate ◽  
National Laboratory ◽  
Brookhaven National Laboratory ◽  
Carbonyl Groups ◽  
Aromatic Rings ◽  
Edge Structure ◽  
X Ray ◽  
Scanning Transmission ◽  
Polymeric Samples ◽  
X Ray Absorption

We have used the Scanning Transmission X-ray Microscope at beamline X1A (X1-STXM) at Brookhaven National Laboratory (BNL) to acquire high resolution, chemical and orientation sensitive images of polymeric samples as well as point spectra from 0.1 μm areas. This sensitivity is achieved by exploiting the X-ray Absorption Near Edge Structure (XANES) of the carbon K edge. One of the most illustrative example of the chemical sensitivity achievable is provided by images of a polycarbonate/pol(ethylene terephthalate) (70/30 PC/PET) blend. Contrast reversal at high overall contrast is observed between images acquired at 285.36 and 285.69 eV (Fig. 1). Contrast in these images is achieved by exploring subtle differences between resonances associated with the π bonds (sp hybridization) of the aromatic groups of each polymer. PET has a split peak associated with these aromatic groups, due to the proximity of its carbonyl groups to its aromatic rings, whereas PC has only a single peak.

Quantitative x-ray microanalysis and thickness determination using ζ factor

1996 ◽  
Vol 54 ◽  
pp. 580-581
Author(s):  
M. Watanabe ◽  
Z. Horita ◽  
M. Nemoto
Keyword(s):  
Diffusion Couple ◽  
Extrapolation Method ◽  
Thin Specimen ◽  
Beam Position ◽  
X Ray ◽  
Thickness Determination ◽  
Experimental Limitation ◽  
X Ray Absorption

X-ray absorption in quantitative x-ray microanalysis of thin specimens may be corrected without knowledge of thickness when the extrapolation method or the differential x-ray absorption (DXA) method is used. However, there is an experimental limitation involved in each method. In this study, a method is proposed to overcome such a limitation. The method is developed by introducing the ζ factor and by combining the extrapolation method and DXA method. The method using the ζ factor, which is called the ζ-DXA method in this study, is applied to diffusion-couple experiments in the Ni-Al system.For a thin specimen where incident electrons are fully transparent, the characteristic x-ray intensity generated from a beam position, I, may be represented as I = (NρW/A)Qωaist.

Sign in / Sign up

Export Citation Format

Share Document