Elemental Analysis and Current-Voltage Characteristics of LiZnP and LiZnAs Samples for Solid-State Neutron Detectors

2013 ◽  
Vol 1576 ◽  
Author(s):  
Benjamin W. Montag ◽  
Michael A. Reichenberger ◽  
Kevin R. Arpin ◽  
Kyle A. Nelson ◽  
Philip B. Ugorowski ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
High Efficiency ◽  
Electrical Characterization ◽  
Atomic Emission ◽  
Bulk Single Crystal ◽  
Neutron Detectors ◽  
Background Radiations ◽  
Inductively Coupled ◽  
Current Voltage ◽  
Silver Epoxy

ABSTRACTResearch for a reliable solid-form semiconductor neutron detector continues because such a device would have greater efficiency, in a compact form, than present day gas-filled 3He and 10BF3 detectors. The 6Li(n,t)4He reaction yields a total Q value of 4.78 MeV, larger than 10B, and easily identified above background radiations. Hence, devices composed of either natural Li (nominally 7.5% 6Li) or enriched 6Li (usually 95% 6Li) may provide a semiconductor material for compact high efficiency neutron detectors. A sub-branch of the III-V semiconductors, the filled tetrahedral compounds, AIBIICV, known as Nowotny-Juza compounds, are known for their desirable cubic crystal structure, and were originally studied for photonic applications. Equimolar portions of Li, Zn, and P or As were sealed under vacuum (10-6 Torr) in quartz ampoules with a graphite lining, loaded into a compounding furnace, and heated to 560 °C to form the ternary compound, LiZnP or LiZnAs, and further annealed to promote crystallization. The chemical composition of the synthesized starting material was confirmed at Galbraith Laboratories, Inc. by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), which showed the compounds were reacted in equal ratios, 1-1-1, to form ternary compounds. Bulk single crystal samples were grown by a high temperature technique described elsewhere. Samples were cut, polished, and prepared for electrical characterization by depositing a Ti/Au contact onto one side of the one of the samples and using silver epoxy to form the other contact. Current-voltage curves were collected for a sample with silver epoxy for both anode and cathode contact, and for a sample with a Ti-Au anode contact and silver epoxy cathode contact. A much higher resistivity was calculated, 6.6 x 1010 Ω·cm, for the sample with a Ti-Au contact compared the high conductivity seen with the sample using silver epoxy contacts.

Rapid Catalyst Capture Enables Metal-Free Parahydrogen-Based Hyperpolarized Contrast Agents

2018 ◽  
Author(s):  
Danila Barskiy ◽  
Lucia Ke ◽  
Xingyang Li ◽  
Vincent Stevenson ◽  
Nevin Widarman ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Contrast Agents ◽  
Inductively Coupled Plasma ◽  
Organometallic Compounds ◽  
Atomic Emission ◽  
Platinum Group Metals ◽  
Resonance Spectroscopy ◽  
Plasma Atomic Emission ◽  
Inductively Coupled

<p>Hyperpolarization techniques based on the use of parahydrogen provide orders of magnitude signal enhancement for magnetic resonance spectroscopy and imaging. The main drawback limiting widespread applicability of parahydrogen-based techniques in biomedicine is the presence of organometallic compounds (the polarization transfer catalysts) in solution with hyperpolarized contrast agents. These catalysts are typically complexes of platinum-group metals and their administration in vivo should be avoided.</p> <p><br></p><p>Herein, we show how extraction of a hyperpolarized compound from an organic phase to an aqueous phase combined with a rapid (less than 10 seconds) Ir-based catalyst capture by metal scavenging agents can produce pure parahydrogen-based hyperpolarized contrast agents as demonstrated by high-resolution nuclear magnetic resonance (NMR) spectroscopy and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The presented methodology enables fast and efficient means of producing pure hyperpolarized aqueous solutions for biomedical and other uses.</p>

Rapid Catalyst Capture Enables Metal-Free Parahydrogen-Based Hyperpolarized Contrast Agents

2018 ◽  
Author(s):  
Danila Barskiy ◽  
Lucia Ke ◽  
Xingyang Li ◽  
Vincent Stevenson ◽  
Nevin Widarman ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Contrast Agents ◽  
Inductively Coupled Plasma ◽  
Organometallic Compounds ◽  
Atomic Emission ◽  
Platinum Group Metals ◽  
Resonance Spectroscopy ◽  
Plasma Atomic Emission ◽  
Inductively Coupled

<p>Hyperpolarization techniques based on the use of parahydrogen provide orders of magnitude signal enhancement for magnetic resonance spectroscopy and imaging. The main drawback limiting widespread applicability of parahydrogen-based techniques in biomedicine is the presence of organometallic compounds (the polarization transfer catalysts) in solution with hyperpolarized contrast agents. These catalysts are typically complexes of platinum-group metals and their administration in vivo should be avoided.</p> <p><br></p><p>Herein, we show how extraction of a hyperpolarized compound from an organic phase to an aqueous phase combined with a rapid (less than 10 seconds) Ir-based catalyst capture by metal scavenging agents can produce pure parahydrogen-based hyperpolarized contrast agents as demonstrated by high-resolution nuclear magnetic resonance (NMR) spectroscopy and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The presented methodology enables fast and efficient means of producing pure hyperpolarized aqueous solutions for biomedical and other uses.</p>

Silicate analysis of carbonated rocks using ICP-AES with calibration by the concentration ratio

2020 ◽  
Vol 86 (5) ◽  
pp. 16-21
Author(s):  
T. A. Karimova ◽  
G. L. Buchbinder ◽  
S. V. Kachin
Keyword(s):  
Inductively Coupled Plasma ◽  
Concentration Ratio ◽  
Total Error ◽  
Atomic Emission ◽  
Emission Spectrometry ◽  
Calibration Error ◽  
Plasma Atomic Emission Spectrometry ◽  
Standard Samples ◽  
Inductively Coupled ◽  
Carbonate Materials

Calibration by the concentration ratio provides better metrological characteristics compared to other calibration modes when using the inductively coupled plasma atomic emission spectrometry (ICP-AES) for analysis of geological samples and technical materials on their base. The main reasons for the observed improvement are: i) elimination of the calibration error of measuring vessels and the error of weighing samples of the analyzed materials from the total error of the analysis; ii) high intensity of the lines of base element; and iii) higher accuracy of measuring the ratio of intensities compared to that of measuring the absolute intensities. Calcium oxide is better suited as a base when using calibration by the concentration ratio in analysis of carbonate rocks, technical materials, slags containing less than 20% SiO2 and more than 20% CaO. An equation is derived to calculate the content of components determined in carbonate materials when using calibration by the concentration ratio. A method of ICP-AES with calibration by the concentration ratio is developed for determination of CaO (in the range of contents 20 – 100%), SiO2 (2.0 – 35%), Al2O3 (0.1 – 30%), MgO (0.1 – 20%), Fe2O3 (0.5 – 40%), Na2O (0.1 – 15%), K2O (0.1 – 5%), P2O5 (0.001 – 2%), MnO (0.01 – 2%), TiO2 (0.01 – 2.0%) in various carbonate materials. Acid decomposition of the samples in closed vessels heated in a HotBlock 200 system is proposed. Correctness of the procedure is confirmed in analysis of standard samples of rocks. The developed procedure was used during the interlaboratory analysis of the standard sample of slag SH17 produced by ZAO ISO (Yekaterinburg, Russia).

Sign in / Sign up

Export Citation Format

Share Document