Ancient Marble Sculpture: Geochemical Characterization of Surficial Weathering Products

1988 ◽  
Vol 123 ◽  
Author(s):  
Stanley V. Margolis ◽  
Frank Preusser ◽  
W.J. Showers

AbstractQuantitative scientific determination of the authenticity and age of marble sculpture is an important goal of geo-archaeologists and conservation scientists. Geochemical and petrographic techniques are used here to investigate rock weathering and mineral alterations responsible for the “patina” and alteration layers on marble sculpture. We present oxygen and carbon isotopic, scanning electron microscopic and electron microprobe analyses of both fresh marble and weathering crusts materials from cores taken from Cycladic and Archaic Greek sculptures and from ancient quarries, to evaluate these techniques as indicators of antiquity.Calcitic marbles exhibit an altered weathering crust of variable thickness, where calcite has been recrystallized and interpenetrated with inclusions of iron oxide, clay minerals, gypsum and other authigenic minerals. The thickness and composition of these crusts varies with soil and water chemistry as well as marble density, texture and age.Microprobe analyses indicate trace element gradients from fresh to weathered calcite. Carbon and oxygen isotopes can differentiate between insitu alteration and precipitated carbonate. Dolomitic marbles can exhibit calcitic surficial layers formed by dedolomitization, which can be confirmed by isotopic and microprobe analyses.Analyses of known forgeries, ancient quarry samples and artificially weathered marbles have further documented our criteria and show that the majority of diagnostic geochemical and mineralogical features seen on ancient Greek sculptures cannot be accurately duplicated by artificial means.

2019 ◽  
Vol 71 (5) ◽  
pp. 630-635 ◽  
Author(s):  
Harun Mindivan

Purpose This paper aims to investigate the structural, corrosion and the study of tribocorrosion features of the AA7075 aluminum alloy with and without the application of electroless Ni-P/Ni-B duplex coating with a thickness of approximately 40 microns. Design/methodology/approach Surface characterization of the samples was made by structural surveys (light optic microscope, scanning electron microscopic examinations and X-ray diffraction analyses), hardness measurements, corrosion and tribocorrosion tests. Findings Results of the experiments showed that upper Ni-B coating deposited on the surface of first Ni-P layer by duplex treatment caused remarkable increment in the hardness, corrosion resistance and tribocorrosion performance as compared to the AA7075 aluminum alloy. Originality/value This study can be a practical reference and offers insight into the effects of duplex treating on the increase of hardness, corrosion and tribocorrosion performance.


HortScience ◽  
1994 ◽  
Vol 29 (5) ◽  
pp. 505e-505
Author(s):  
Michael A. Creller ◽  
Dennis J. Werner

Surface morphology of peach [Prunus persica (L.) Batsch] Plant Introduction 133984 (`Marina') differs from standard peach and nectarine clones. Scanning electron microscopic examination of `Marina', a standard peach (`Contender'), and a nectarine (`Sunglo') was conducted. At anthesis, `Marina' ovaries were glabrous, similar to `sunglo' nectarine. Fruit of `Contender' were fully pubescent at anthesis. Examination of `Marina' fruit two weeks after anthesis revealed the presence of both pubescent and glabrous sectors on the fruit surface. At fruit maturity, most of the fruit surface of `Marina' was covered with pubescence, but trichome density was considerably less than `Contender' peach. Trichome morphology of `Marina' differed from that of `Contender'.


2020 ◽  
Vol 83 (12) ◽  
pp. 1507-1529
Author(s):  
Shabnum Shaheen ◽  
Rozina Fateh ◽  
Sidra Younis ◽  
Nidaa Harun ◽  
Mehwish Jaffer ◽  
...  

2011 ◽  
Vol 335-336 ◽  
pp. 191-194 ◽  
Author(s):  
Xin Ying Lv ◽  
Zhen Hua Gao ◽  
Yan Hua Zhang ◽  
Ming Wei Di

The lignin/PE composites with different compatibilizing agents were extruded and the tensile properties have been tested. The weight ratio of PE, ligin and PE-a-MAH were 7.5%, 10%and 12.5wt%; the weight ratio of PE, ligin and PP-a-MAH were 5%, 7.5% and 10wt% respectively. Scanning Electron Microscopic (SEM) was used to characterize the morphology of the composites. The tensile strengths of lignin/PE composites with PE-g-MAH were higher than that one with PP-g-MAH. Both of them were higher than that one without any compatibilizing agent. And PE-g-MAH was the better compatibilizing agent confirmed by the mechanical tests and SEM results.


1991 ◽  
Vol 8 (1-4) ◽  
pp. 194-199 ◽  
Author(s):  
Michael J. Groves ◽  
Melvin E. Klegerman ◽  
Priscilla O. Devadoss ◽  
Onkar N. Singh ◽  
Yueying Zong

Sign in / Sign up

Export Citation Format

Share Document