Problems with The Concept of Thermal Budget: Experimental Demonstrations

1997 ◽  
Vol 470 ◽  
Author(s):  
R. Ditchfield ◽  
E. G. Seebauer

ABSTRACTUp to now, kinetic effects in rapid thermal processing (RTP) have been assessed using the concept of thermal budget, with the idea that thermal budget minimization should minimize dopant diffusion and interface degradation. This work highlights shortcomings with that principle. Experiments comparing directly the rate of Si chemical vapor deposition with that of dopant diffusion show how thermal budget minimization can actually worsen diffusion problems rather than mitigate them. We present a straightforward framework for improving the results through comparison of activation energies of the desired and undesired phenomena. This framework explains the experimental results and provides strong kinetic arguments for continued development of rapid isothermal processing and small batch fast ramp methods.

1998 ◽  
Vol 525 ◽  
Author(s):  
R. Ditchfield ◽  
E. G. Seebauer

ABSTRACTRapid thermal processing (RTP) has found continually increasing use for oxidation, silicidation, CVD, and other steps in microelectronic fabrication. Kinetic effects in rapid thermal processing (RTP) are often assessed using the concept of thermal budget, with the idea that low thermal budgets should minimize dopant diffusion and interface degradation. Some definitions of budget employ the product of temperature and time (T-t). In previous work, we have shown that this definition for budget often leads to qualitatively incorrect conclusions regarding heating program design. However, other definitions of budget employ the product of diffusivity and time (D-t), where the diffusivity describes unwanted diffusion or interface degradation. Here we show that minimization of D-t by itself is insufficient to kinetically optimize a heating program; account must be taken of the relative rates of the desired and undesired phenomena. We present a straightforward but rigorous method for doing so.


Author(s):  
Jaegeun Lee ◽  
Moataz Abdulhafez ◽  
Mostafa Bedewy

Abstract For the scalable production of commercial products based on vertically aligned carbon nanotubes (VACNTs), referred to as CNT forests, key manufacturing challenges must be overcome. In this work, we describe some of the main challenges currently facing CNT forest manufacturing, along with how we address these challenges with our custom-built rapid thermal processing chemical vapor deposition (CVD) reactor. First, the complexity of multistep processes and reaction pathways involved in CNT growth by CVD limits the control on CNT population growth dynamics. Importantly, gas-phase decomposition of hydrocarbons, formation of catalyst particles, and catalytic growth of CNTs are typically coupled. Here, we demonstrated a decoupled recipe with independent control of each step. Second, significant run-to-run variations plague CNT growth by CVD. To improve growth consistency, we designed various measures to remove oxygen-containing molecules from the reactor, including air baking between runs, dynamic pumping down cycles, and low-pressure baking before growth. Third, real-time measurements during growth are needed for process monitoring. We implement in situ height kinetics via videography. The combination of approaches presented here has the potential to transform lab-scale CNT synthesis to robust manufacturing processes.


Sign in / Sign up

Export Citation Format

Share Document