Microcharacterization of Heterogeneous Specimens Containing Tire Dust

1999 ◽  
Vol 589 ◽  
Author(s):  
Marina Camatini ◽  
GAI M Corbetta ◽  
Giovanini F Crosta ◽  
Tigran Dolukhanyan ◽  
Giampaolo Giuiani ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Analytical Electron Microscopy ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Debris Particles ◽  
Microscope Images ◽  
Analytical Electron ◽  
Diffraction Patterns

AbstractThis work is focused on dust or debris produced by the wear of tire tread. Two problems are addressed, which are solved by analytical electron microscopy (AEM): characterization of tire debris and identification of tire debris particles in a heterogeneous specimen. The characteristic morphology, microstructure and elemental composition of tire debris can all be determined by AEM. The scanning electron microscope (SEM) shows that the surface of a tire debris particle has a typical, warped structure with pores. The characteristic elements of tire rubber are S and Zn, which are detected by energy dispersive X ray (EDX) spectroscopy. The identification of rubber particles in heterogeneous debris containing talc and produced by a laboratory abrader is possible by the analytical SEM. Transmission electron microscope images, EDX spectra and selected area electron diffraction patterns characterize tire debris at the sub–micron scale, where the material can no longer be treated as homogeneous.

Solvothermal route to Bi3Se4 nanorods at low temperature

2001 ◽  
Vol 16 (12) ◽  
pp. 3361-3365 ◽  
Author(s):  
Yuan-fang Liu ◽  
Jing-hui Zeng ◽  
Wei-xin Zhang ◽  
Wei-chao Yu ◽  
Yi-tai Qian ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Reaction Mechanism ◽  
Low Temperature ◽  
Hydrazine Hydrate ◽  
Photoelectron Spectra ◽  
Elemental Selenium ◽  
X Ray ◽  
Transmission Electron ◽  
Microscope Images ◽  
Diffraction Patterns

Nanorods Bi3Se4 were synthesized directly through the reaction between BiCl3 and elemental selenium in an autoclave with hydrazine hydrate as solvent at 165 °C for 10 h. X-ray powder diffraction patterns, x-ray photoelectron spectra, and transmission electron microscope images show that the products are well-crystallized hexagonal Bi3Se4 nanorods. The solvent hydrazine hydrate played an important role in formation and growth of Bi3Se4 nanorods. The possible reaction mechanism was proposed.

X-ray Energy-Dispersive Spectrometry During In Situ Liquid Cell Studies Using an Analytical Electron Microscope

2014 ◽  
Vol 20 (2) ◽  
pp. 323-329 ◽  
Author(s):  
Nestor J. Zaluzec ◽  
M. Grace Burke ◽  
Sarah J. Haigh ◽  
Matthew A. Kulzick
Keyword(s):  
Electron Microscope ◽  
Analytical Electron Microscopy ◽  
Scanning Transmission Electron Microscope ◽  
Energy Dispersive ◽  
X Ray ◽  
Transmission Electron ◽  
Analytical Electron ◽  
Scanning Transmission ◽  
Liquid Cell

AbstractThe use of analytical spectroscopies during scanning/transmission electron microscope (S/TEM) investigations of micro- and nano-scale structures has become a routine technique in the arsenal of tools available to today’s materials researchers. Essential to implementation and successful application of spectroscopy to characterization is the integration of numerous technologies, which include electron optics, specimen holders, and associated detectors. While this combination has been achieved in many instrument configurations, the integration of X-ray energy-dispersive spectroscopy and in situ liquid environmental cells in the S/TEM has to date been elusive. In this work we present the successful incorporation/modifications to a system that achieves this functionality for analytical electron microscopy.

Analytical Electron Microscopy of Solid Catalysts

1982 ◽  
Vol 40 ◽  
pp. 660-663
Author(s):  
F. Delannay
Keyword(s):  
Electron Microscopy ◽  
Analytical Electron Microscopy ◽  
Supported Metal Catalysts ◽  
X Ray ◽  
Solid Catalysts ◽  
Transmission Electron ◽  
Analytical Electron ◽  
Conventional Transmission Electron Microscope ◽  
Electron Microdiffraction

Practical catalysts are usually intricate mixtures of phases which cannot be characterized separately unless looked at below the micron scale. For about two decades, electron microscopy has been a priviledged complement to selective chemisorption methods for the study of supported metal catalysts. Until recently, however, reliable tools allowing characterization of oxide and sulfide catalysts (e.g. for selective oxidation and hydrodesulfurization reactions) have been lacking. This contribution aims at illustrating the new insights into the understanding of these systems which have been provided by the combination of thin film X-ray microanalysis and electron microdiffraction within a conventional transmission electron microscope with STEM and EDS attachments.

The Effect of Ag-Addition on Crystal Structure of β'-Phase in Al-Mg-Si Alloy

2006 ◽  
Vol 519-521 ◽  
pp. 511-514 ◽  
Author(s):  
Junya Nakamura ◽  
Kenji Matsuda ◽  
Yoshio Nakamura ◽  
Tatsuo Sato ◽  
Susumu Ikeno
Keyword(s):  
Crystal Structure ◽  
Electron Microscope ◽  
High Resolution ◽  
Metastable Phase ◽  
Ag Addition ◽  
X Ray ◽  
Β Phase ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Diffraction Patterns

The purpose of this study is identity the crystal structure of metastable phase in Ag added Al-Mg-Si alloy by comparing the β’-phases in Al-Mg-Si alloy without Ag, using images of high resolution transmission electron microscope (HRTEM), selected area electron diffraction patterns (SADPs) and an energy dispersive X-ray spectroscopy (EDS). The result of SADPs and HRTEM images have been simulated and compared with images and SADPs obtained from actual precipitates. SADPs and HRTEM images obtained from metastable phase in the Ag added Al-Mg-Si alloy showed similar to those of β’-phase in Al-Mg-Si alloy without Ag and had different lattice spacings because of the effect of Ag.

Crystal Structure of the β'-Phase in Al-Mg-Si-Ag Alloy

2007 ◽  
Vol 539-543 ◽  
pp. 837-841 ◽  
Author(s):  
Kenji Matsuda ◽  
Junya Nakamura ◽  
Yoshio Nakamura ◽  
Tatsuo Sato ◽  
Susumu Ikeno
Keyword(s):  
Crystal Structure ◽  
Electron Microscope ◽  
High Resolution ◽  
Metastable Phase ◽  
Careful Analysis ◽  
X Ray ◽  
Β Phase ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Diffraction Patterns

The crystal structure of metastable phase in Ag added Al-Mg-Si alloy was investigated by comparing the β’-phases in Al-Mg-Si alloy without Ag, using images of high resolution transmission electron microscope (HRTEM), selected area electron diffraction patterns (SADPs) and an energy dispersive X-ray spectroscopy (EDS). SADPs and HRTEM images obtained from metastable phase in the Ag added Al-Mg-Si alloy showed similar to those of β’-phase in Al-Mg-Si alloy without Ag and had different lattice spacings because of the effect of Ag. According to our careful analysis on obtained HRTEM images and SADPs, it includes more complicated crystal lattice of distorted hexagons.

The effect of small additions of Cu on precipitation in Al-Mg-Si alloys

1990 ◽  
Vol 48 (2) ◽  
pp. 442-443
Author(s):  
M. Tamizifar ◽  
G. Cliff ◽  
R.W. Devenish ◽  
G.W. Lorimer
Keyword(s):  
Electron Microscopy ◽  
Analytical Electron Microscopy ◽  
Scanning Transmission Electron Microscope ◽  
Argon Atmosphere ◽  
Age Hardening ◽  
X Ray ◽  
Transmission Electron ◽  
Heat Treated ◽  
Analytical Electron ◽  
Scanning Transmission

Small additions of copper, <1 wt%, have a pronounced effect on the ageing response of Al-Mg-Si alloys. The object of the present investigation was to study the effect of additions of copper up to 0.5 wt% on the ageing response of a series of Al-Mg-Si alloys and to use high resolution analytical electron microscopy to determine the composition of the age hardening precipitates.The composition of the alloys investigated is given in Table 1. The alloys were heat treated in an argon atmosphere for 30m, water quenched and immediately aged either at 180°C for 15 h or given a duplex treatment of 180°C for 15 h followed by 350°C for 2 h2. The double-ageing treatment was similar to that carried out by Dumolt et al. Analyses of the precipitation were carried out with a HB 501 Scanning Transmission Electron Microscope. X-ray peak integrals were converted into weight fractions using the ratio technique of Cliff and Lorimer.

Sign in / Sign up

Export Citation Format

Share Document