scholarly journals NUMERICAL SIMULATION OF THE ACOUSTIC WAVES PROPAGATION IN A STANDING WAVE TUBE WITH A SOUND ABSORBENT MATERIAL USING THE FINITE ELEMENT METHOD.

2010 ◽  
Vol XIX (IX), 2010/1 (1) ◽  
Author(s):  
E. JULIÁ SANCHIS ◽  
J. SEGURA ALCARAZ ◽  
J.M. GADEA BORRELL ◽  
J. MASIÁ VAÃà ◽  
J. ALBA FERNÁNDEZ
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Standing Wave ◽  
Acoustic Waves ◽  
The Finite Element Method ◽  
Wave Tube ◽  
Absorbent Material ◽  
Waves Propagation ◽  
Standing Wave Tube

The study of the elastic deformation of a flexible wheel by a cam wave generator

2020 ◽  
Vol 65 (1) ◽  
pp. 51-58
Author(s):  
Sava Ianici
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Elastic Deformation ◽  
Theoretical Study ◽  
Elastic Field ◽  
The Finite Element Method ◽  
Elastic Deformations ◽  
Wave Generator ◽  
Two Stages

The paper presents the results of research on the study of the elastic deformation of a flexible wheel from a double harmonic transmission, under the action of a cam wave generator. Knowing exactly how the flexible wheel is deformed is important in correctly establishing the geometric parameters of the wheels teeth, allowing a better understanding and appreciation of the specific conditions of harmonic gearings in the two stages of the transmission. The veracity of the results of this theoretical study on the calculation of elastic deformations and displacements of points located on the average fiber of the flexible wheel was subsequently verified and confirmed by numerical simulation of the flexible wheel, in the elastic field, using the finite element method from SolidWorks Simulation.

Investigation of Strength in G4-73 Type Centrifugal Fan Impeller

2011 ◽  
Vol 383-390 ◽  
pp. 5669-5673
Author(s):  
Song Ling Wang ◽  
Zhe Sun ◽  
Zheng Ren Wu
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Calculation Result ◽  
Working Condition ◽  
Equivalent Stress ◽  
Centrifugal Fan ◽  
The Finite Element Method ◽  
Total Displacement ◽  
Maximum Equivalent Stress

For the large centrifugal fan impeller, its working condition generally is bad, and its geometry generally is complex. So its displacements and stresses distribution are also complex. In this paper, we can obtain the fan impeller’s displacements and stresses distribution accurately through numerical simulation in G4-73 type centrifugal fan impeller using the finite element method software ANSYS. The calculation result shows that the maximum total displacement of the impeller is m, it occurs on the position of the half of the blade near the outlet of the impeller; and the maximum equivalent stress of the impeller is 193 MPa, it occurs on the contacted position of the blade and the shroud near inlet of the impeller. Furthermore, check the impeller strength, the result shows that the strength of the impeller can meet the requirement.

Sign in / Sign up

Export Citation Format

Share Document