scholarly journals A simplified approach to reliability evaluation of deep rock tunnel deformation using First-Order Reliability Method and Monte Carlo simulations

2022 ◽  
Vol 15 (1) ◽  
Author(s):  
Caio Cesar Cardoso da Silva ◽  
Mauro de Vasconcellos Real ◽  
Samir Maghous
Keyword(s):  
Monte Carlo ◽  
Reliability Analysis ◽  
Numerical Models ◽  
Limit State ◽  
Random Variables ◽  
Support Pressure ◽  
First Order Reliability Method ◽  
First Order ◽  
Reliability Method ◽  
Shotcrete Lining

abstract: The Monte Carlo simulation (MCS) and First-Order Reliability Method (FORM) provide a reliability analysis in axisymmetric deep tunnels driven in elastoplastic rocks. The Convergence-Confinement method (CV-CF) and Mohr-Coulomb (M-C) criterion are used to model the mechanical interaction between the shotcrete lining and ground through deterministic parameters and random variables. Numerical models synchronize tunnel analytical models and reliability methods, whereas the limit state functions control the failure probability in both ground plastic zone and shotcrete lining. The results showed that a low dispersion of random variables affects the plastic zone's reliability analysis in unsupported tunnels. Moreover, the support pressure generates a significant reduction in the plastic zone's failure, whereas the increase of shotcrete thickness results in great reduction of the lining collapse probability.

scholarly journals Reliability Analysis of Reinforced Concrete Frame by Finite Element Method with Implicit Limit State Functions

Buildings ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 119 ◽  
Author(s):  
Marin Grubišić ◽  
Jelena Ivošević ◽  
Ante Grubišić
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Reinforced Concrete ◽  
Reliability Analysis ◽  
Numerical Models ◽  
Limit State ◽  
First Order Reliability Method ◽  
First Order ◽  
Knowledge Based ◽  
Reliability Method

Since the prediction of the seismic response of structures is highly uncertain, the need for the probabilistic approach is clear, especially for the estimation of critical seismic response parameters. Considering the uncertainties present in the material and geometric form of reinforced concrete (RC) structures, reliability analyses using the Finite Element Method (FEM) were performed in the context of Performance-Based Earthquake Engineering (PBEE). This study presented and compared the possibilities of nonlinear modelling of the reinforced concrete (RC) planar frame and its reliability analysis using different numerical methods, Mean-Value First-Order Second-Moment (MVFOSM), First-Order Reliability Method (FORM), Second-Order Reliability Method (SORM) and Monte Carlo simulation (MCS). The calibrated numerical models used were based on the previous experimental test of a planar RC frame subjected to cyclic horizontal load. Numerical models were upgraded by random variable (RV) parameters for reliability analysis purposes and, using implicit limit state function (LSF), pushover analyses were performed by controlling the horizontal inter-storey drift ratio (IDR). Reliability results were found to be sensitive to the reliability analysis method. The results of reliability analysis reveal that, in a nonlinear region, after exceeding the yield strength of the longitudinal reinforcement, the cross-sectional geometry parameters were of greater importance compared to the parameters of the material characteristics. The results also show that epistemic (knowledge-based) uncertainties significantly affected dispersion and on the median estimate parameter response. The MCS sampling method is recommended, but the First-Order Reliability Method (FORM) applied on a response model can be used with good accuracy. Reliability analysis using the FEM proved to be suitable for the direct implementation of geometric and material nonlinearities to cover epistemic (knowledge-based) uncertainties.

First-Order Reliability Method for Structural Reliability Analysis in the Presence of Random and Interval Variables

2015 ◽  
Vol 1 (4) ◽  
Author(s):  
Umberto Alibrandi ◽  
C. G. Koh
Keyword(s):  
Reliability Analysis ◽  
Structural Reliability ◽  
Limit State ◽  
Computational Cost ◽  
Computational Effort ◽  
Stochastic Dynamic ◽  
First Order Reliability Method ◽  
First Order ◽  
Structural Reliability Analysis ◽  
Reliability Method

This paper presents a novel procedure based on first-order reliability method (FORM) for structural reliability analysis in the presence of random parameters and interval uncertain parameters. In the proposed formulation, the hybrid problem is reduced to standard reliability problems, where the limit state functions are defined only in terms of the random variables. Monte Carlo simulation (MCS) for hybrid reliability analysis (HRA) is presented, and it is shown that it requires a tremendous computational effort; FORM for HRA is more efficient but still demanding. The computational cost is significantly reduced through a simplified procedure, which gives good approximations of the design points, by requiring only three classical FORMs and one interval analysis (IA), developed herein through an optimization procedure. FORM for HRA and its simplified formulation achieve a much improved efficiency than MCS by several orders of magnitude, and it can thus be applied to real-world engineering problems. Representative examples of stochastic dynamic analysis and performance-based engineering are presented.

Neural network approach to model the limit state surface for reliability analysis

2003 ◽  
Vol 40 (6) ◽  
pp. 1235-1244 ◽  
Author(s):  
Anthony TC Goh ◽  
Fred H Kulhawy
Keyword(s):  
Neural Network ◽  
Reliability Index ◽  
Structural Reliability ◽  
Limit State ◽  
Random Variables ◽  
First Order Reliability Method ◽  
First Order ◽  
The Neural Network ◽  
Reliability Method ◽  
Geotechnical Structures

Structural reliability methods are often used to evaluate the failure performance of geotechnical structures. A common approach is to use the first-order reliability method. Its popularity results from the mathematical simplicity of the method, since only second moment information (mean and coefficient of variation) on the random variables is required. The probability of failure is then assessed by an index known commonly as the reliability index. One critical aspect in determining the reliability index is the explicit definition of the limit state surface of the system. In a problem involving multi-dimensional random variables, the limit state surface is the boundary separating the safe domain from the "failure" (or lack of serviceability) domain. In many complicated and nonlinear problems where the analyses involve the use of numerical procedures such as the finite element method, this surface may be difficult to determine explicitly in terms of the random variables, and therefore the limit state can only be expressed implicitly rather than in a closed-form solution. It is proposed in this paper to use an artificial intelligence technique known as the back-propagation neural network algorithm to model the limit state surface. First, the failure domain is found through repeated point-by-point numerical analyses with different input values. The neural network is then trained on this set of data. Using the optimal weights of the neural network connections, it is possible to develop a mathematical expression relating the input and output variables that approximates the limit state surface. Some examples are given to illustrate the application and accuracy of the proposed approach.Key words: first-order reliability method, geotechnical structures, limit state surface, neural networks, reliability.

Reliability analysis for a spar-supported floating offshore wind turbine

2017 ◽  
Vol 42 (1) ◽  
pp. 51-65 ◽  
Author(s):  
Abhinav Sultania ◽  
Lance Manuel
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Reliability Analysis ◽  
Wave Height ◽  
Return Period ◽  
Random Variables ◽  
Environmental Data ◽  
First Order Reliability Method ◽  
First Order ◽  
Reliability Method

The reliability analysis of a spar-supported floating offshore 5-MW wind turbine is the subject of this study. Environmental data from a selected site are employed in the numerical studies. Using time-domain simulations, the dynamic behavior of a coupled platform-turbine system is studied; statistics of tower and rotor loads as well as platform motions are estimated and critical combinations of wind speed and wave height identified. Long-term loads associated with a 50-year return period are estimated using statistical extrapolation based on loads derived from simulations. Inverse reliability procedures that seek appropriate fractile levels for underlying variables consistent with the target load return period are employed; these include use of (1) two-dimensional inverse first-order reliability method where extreme loads, conditional on wind speed and wave height random variables, are selected at median levels and (2) three-dimensional inverse first-order reliability method where variability in the environmental and load random variables is fully represented.

scholarly journals Hybrid Approach to the First Order Reliability Method in the Reliability Analysis of a Spatial Structure

2021 ◽  
Vol 11 (2) ◽  
pp. 648
Author(s):  
Agnieszka Dudzik ◽  
Beata Potrzeszcz-Sut
Keyword(s):  
Reliability Analysis ◽  
Reliability Index ◽  
Limit State ◽  
Hybrid Approach ◽  
Reference Method ◽  
Transformation Method ◽  
State Function ◽  
First Order Reliability Method ◽  
First Order ◽  
Reliability Method

The objective of the article involves presenting two approaches to the structure reliability analysis. The primary research method was the First Order Reliability Method (FORM). The Hasofer–Lind reliability index β in conjunction with transformation method in the FORM was adopted as the measure of reliability. The first proposal was combining NUMPRESS software with the non-commercial KRATA program. In this case, the implicit form of the random variables function was created. Limit state function was symbolically given in the standard math notation as a function of the basic random and external variables. The second analysis proposed a hybrid approach enabling the introduction of explicit forms of limit state functions to the reliability program. To create the descriptions of this formula, the neural networks were used and our own original FEM module. The combination of conventional and neural computing can be seen as a hybrid system. The explicit functions were implemented into NUMPRESS software. The values of the reliability index for different descriptions of the mathematical model of the structure were determined. The proposed hybrid approach allowed us to obtain similar results to the results from the reference method.

Reliability analysis of corroded pipelines: Novel adaptive conjugate first order reliability method

2019 ◽  
Vol 62 ◽  
pp. 103986 ◽  
Author(s):  
Behrooz Keshtegar ◽  
Mohamed El Amine Ben Seghier ◽  
Shun-Peng Zhu ◽  
Rouzbeh Abbassi ◽  
Nguyen-Thoi Trung
Keyword(s):  
Reliability Analysis ◽  
First Order Reliability Method ◽  
First Order ◽  
Reliability Method

Reliability Methods for Bimodal Distribution With First-Order Approximation1

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Zhangli Hu ◽  
Xiaoping Du
Keyword(s):  
Probability Density ◽  
Order Approximation ◽  
Limit State ◽  
Random Variables ◽  
Random Variable ◽  
State Function ◽  
First Order ◽  
Reliability Method ◽  
Reliability Methods ◽  
Basic Random Variable

In traditional reliability problems, the distribution of a basic random variable is usually unimodal; in other words, the probability density of the basic random variable has only one peak. In real applications, some basic random variables may follow bimodal distributions with two peaks in their probability density. When binomial variables are involved, traditional reliability methods, such as the first-order second moment (FOSM) method and the first-order reliability method (FORM), will not be accurate. This study investigates the accuracy of using the saddlepoint approximation (SPA) for bimodal variables and then employs SPA-based reliability methods with first-order approximation to predict the reliability. A limit-state function is at first approximated with the first-order Taylor expansion so that it becomes a linear combination of the basic random variables, some of which are bimodally distributed. The SPA is then applied to estimate the reliability. Examples show that the SPA-based reliability methods are more accurate than FOSM and FORM.

scholarly journals A decoupling algorithm with first-order asymptotic integration for reliability-based design optimization

2018 ◽  
Vol 10 (9) ◽  
pp. 168781401879333 ◽  
Author(s):  
Zhiliang Huang ◽  
Tongguang Yang ◽  
Fangyi Li
Keyword(s):  
Design Optimization ◽  
Reliability Analysis ◽  
Optimization Problems ◽  
Asymptotic Integration ◽  
Probabilistic Constraints ◽  
Reliability Based Design Optimization ◽  
First Order Reliability Method ◽  
First Order ◽  
Reliability Based Design ◽  
Reliability Method

Conventional decoupling approaches usually employ first-order reliability method to deal with probabilistic constraints in a reliability-based design optimization problem. In first-order reliability method, constraint functions are transformed into a standard normal space. Extra non-linearity introduced by the non-normal-to-normal transformation may increase the error in reliability analysis and then result in the reliability-based design optimization analysis with insufficient accuracy. In this article, a decoupling approach is proposed to provide an alternative tool for the reliability-based design optimization problems. To improve accuracy, the reliability analysis is performed by first-order asymptotic integration method without any extra non-linearity transformation. To achieve high efficiency, an approximate technique of reliability analysis is given to avoid calculating time-consuming performance function. Two numerical examples and an application of practical laptop structural design are presented to validate the effectiveness of the proposed approach.

Sign in / Sign up

Export Citation Format

Share Document