PRELIMINARY DESIGN AND SIMULATION OF SIPM DEVICE OPERATION FOR A POTENTIAL CUBESAT RADIATION DETECTOR

2019 ◽  
Vol 78 (18) ◽  
pp. 1671-1680
Author(s):  
Y. M. Belkacem ◽  
B. Benadda ◽  
M. Benaissa
Keyword(s):  
Radiation Detector ◽  
Preliminary Design ◽  
Device Operation

The Minnesota inverted-tee system: Parametric studies for preliminary design

PCI Journal ◽  
2012 ◽  
Vol 57 (2) ◽  
pp. 162-179
Author(s):  
Roberto Piccinin ◽  
Arturo E. Schultz
Keyword(s):  
Preliminary Design ◽  
Parametric Studies

Analysis of the Bias Dependent Spectral Response of a-SiC:H p-i-n Photodiode

2002 ◽  
Vol 715 ◽  
Author(s):  
P. Louro ◽  
A. Fantoni ◽  
Yu. Vygranenko ◽  
M. Fernandes ◽  
M. Vieira
Keyword(s):  
Bias Voltage ◽  
Voltage Dependence ◽  
Spectral Response ◽  
Surface Recombination ◽  
Electrical Field ◽  
Field Reversal ◽  
Current Voltage ◽  
Voltage Dependent ◽  
And Inversion ◽  
Device Operation

AbstractThe bias voltage dependent spectral response (with and without steady state bias light) and the current voltage dependence has been simulated and compared to experimentally obtained values. Results show that in the heterostructures the bias voltage influences differently the field and the diffusion part of the photocurrent. The interchange between primary and secondary photocurrent (i. e. between generator and load device operation) is explained by the interaction of the field and the diffusion components of the photocurrent. A field reversal that depends on the light bias conditions (wavelength and intensity) explains the photocurrent reversal. The field reversal leads to the collapse of the diode regime (primary photocurrent) launches surface recombination at the p-i and i-n interfaces which is responsible for a double-injection regime (secondary photocurrent). Considerations about conduction band offsets, electrical field profiles and inversion layers will be taken into account to explain the optical and voltage bias dependence of the spectral response.

Energetic Control of Redox-Active Polymers Towards Safe Organic Bioelectronic Materials

2019 ◽  
Author(s):  
Alexander Giovannitti ◽  
Reem B. Rashid ◽  
Quentin Thiburce ◽  
Bryan D. Paulsen ◽  
Camila Cendra ◽  
...  
Keyword(s):  
Molecular Oxygen ◽  
Organic Semiconductors ◽  
Side Reaction ◽  
Semiconducting Polymers ◽  
Side Reactions ◽  
Redox Active ◽  
Donor Acceptor ◽  
Electrochemical Devices ◽  
Biological Environment ◽  
Device Operation

<p>Avoiding faradaic side reactions during the operation of electrochemical devices is important to enhance the device stability, to achieve low power consumption, and to prevent the formation of reactive side‑products. This is particularly important for bioelectronic devices which are designed to operate in biological systems. While redox‑active materials based on conducting and semiconducting polymers represent an exciting class of materials for bioelectronic devices, they are susceptible to electrochemical side‑reactions with molecular oxygen during device operation. We show that this electrochemical side reaction yields hydrogen peroxide (H<sub>2</sub>O<sub>2</sub>), a reactive side‑product, which may be harmful to the local biological environment and may also accelerate device degradation. We report a design strategy for the development of redox-active organic semiconductors based on donor-acceptor copolymers that prevent the formation of H<sub>2</sub>O<sub>2</sub> during device operation. This study elucidates the previously overlooked side-reactions between redox-active conjugated polymers and molecular oxygen in electrochemical devices for bioelectronics, which is critical for the operation of electrolyte‑gated devices in application-relevant environments.</p>

IDENTIFIKASI RASIO PARAMETER KAPAL PENUMPANG CATAMARAN BERBAHAN FRP

2013 ◽  
Vol 12 (3) ◽  
Author(s):  
Soegeng Hardjono
Keyword(s):  
Main Parameter ◽  
Slenderness Ratio ◽  
Technical Analysis ◽  
Preliminary Design ◽  
Naval Architecture

Parameter ratios are important information for the ship designer in the preliminary design stages. They can be used as a tool to identify the main parameter of vessel and their other technical characteristics. The information about parameter ratios of mono-hull vessel is currently available in Naval Architecture literatures, but it is not the case for the type of twin-hull vessel called catamaran. Having conducted technical analysis in this research, it has been identified that parameter ratios of passenger catamaran vessel made of FRP has values of L / B ratio from 2.52 up to 3.7, L / D ratio from 5.25 up to 11:24, slenderness ratio (Lwl/BwL) from  9 up to 12. Other values of various parameter ratios like B/T, D/T, L /√ L, and Displacement/L are also discussed.

Kajian Kinerja Kapal Bantu Hidro-Oceanography

2019 ◽  
Vol 4 (1) ◽  
pp. 35
Author(s):  
Meitha Soetardjo ◽  
Dian Purnamasari
Keyword(s):  
Preliminary Design ◽  
Resistance Model ◽  
Supporting Force

Bantu Hidro-Oceanography (BHO) adalah salah satu satuan bantu dalam bidang survei Hidro-Oceanography yang termasuk dalam susunan tempur pendukung (Supporting Force). Untuk kepentingan tersebut maka preliminary design kapal Hidro-Oceanography dilaksanakan sebagai langkah awal dalam perencanaan dan pengadaan kapal Hidro-Oceanography untuk mengkaji karakteristik umum desain yaitu hidrostatik dan stabilitas sehingga aspek kelayakan kapal dapat terpenuhi. Analisa hasil kajian kinerja kapal Hidro-Oceanography dipersiapkan untuk pengujian tahanan/resistance model kapal.Keywords : Preliminary design1, Hydrostatic2, Stability3

Contemporary Methods of Designing Rail Vehicle Running Systems with the Use of CAD and CAM Solutions

2020 ◽  
Vol 64 (187) ◽  
pp. 75-80
Author(s):  
Tomasz Antkowiak ◽  
Marcin Kruś
Keyword(s):  
System Design ◽  
Preliminary Design ◽  
Support Design ◽  
Detailed Design ◽  
Final Shape ◽  
Rail Vehicle ◽  
Design Engineers ◽  
Running System ◽  
Cad Cam

The article discusses the process of designing the running system of a rail vehicle using CAD and CAM tools as the solutions supporting the process. It describes the particular stages of design taking its final shape: from a preliminary design, through a detailed design, ending with the stage of production. Each stage includes a presentation of how CAD and CAM tools are used to support design engineers in their practice. Keywords: running system, design, CAD, CAM

Research for (100)-Oriented Diamond Film Radiation Detector

2009 ◽  
Vol 24 (6) ◽  
pp. 1254-1258
Author(s):  
Hu-Jang SHEN ◽  
Lin-Jun WANG ◽  
Jian HUANG ◽  
Run XU ◽  
Wei-Ming SHI ◽  
...  
Keyword(s):  
Diamond Film ◽  
Radiation Detector
Sign in / Sign up

Export Citation Format

Share Document