INTERACTIONS BETWEEN FREE-STREAM TURBULENCE AND TURBULENT BOUNDARY LAYER GENERATED BY PID CONTROL AND LINEAR FORCING

2021 ◽  
Author(s):  
Hitoshi Suto ◽  
Yasuo Hattori ◽  
Keisuke Nakao
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pid Control ◽  
Free Stream ◽  
Free Stream Turbulence

scholarly journals Relaxation process modeling in a turbulent boundary layer with nonzero free stream turbulence

1997 ◽  
Vol 3 (3) ◽  
pp. 255-265
Author(s):  
Eugen Dyban ◽  
Ella Fridman
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Process Modeling ◽  
Free Stream ◽  
Equations Of Motion ◽  
Turbulent Shear ◽  
Shear Stresses ◽  
Free Stream Turbulence ◽  
Relaxation Effects ◽  
Averaged Equations

In order to analyze the relaxation effects in a turbulent boundary layer with zero and nonzero free stream turbulence, the Reynolds-averaged equations of motion and energy are solved. As the closure of the Reynolds-averaged equations, the transport equation for turbulent shear stresses is used. The proposed approach leads to calculation of the relaxation scales in the turbulent boundary layer with zero and nonzero free stream turbulence. Results for friction coefficients, velocity profiles, shear stresses, thickness of the boundary layer and so called “superlayer” in a flat-plate turbulent boundary layer are presented. The results obtained are in agreement with those available from the experimental data.

scholarly journals Effect of turbulence on the wake of a wall-mounted cube

2016 ◽  
Vol 804 ◽  
pp. 513-530 ◽  
Author(s):  
R. Jason Hearst ◽  
Guillaume Gomit ◽  
Bharathram Ganapathisubramani
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Turbulence Intensity ◽  
Free Stream ◽  
Reattachment Length ◽  
Free Stream Turbulence ◽  
Boundary Layer Development ◽  
Image Velocimetry ◽  
Shedding Frequency ◽  
Layer Development

The influence of turbulence on the flow around a wall-mounted cube immersed in a turbulent boundary layer is investigated experimentally with particle image velocimetry and hot-wire anemometry. Free-stream turbulence is used to generate turbulent boundary layer profiles where the normalised shear at the cube height is fixed, but the turbulence intensity at the cube height is adjustable. The free-stream turbulence is generated with an active grid and the turbulent boundary layer is formed on an artificial floor in a wind tunnel. The boundary layer development Reynolds number ($Re_{x}$) and the ratio of the cube height ($h$) to the boundary layer thickness ($\unicode[STIX]{x1D6FF}$) are held constant at $Re_{x}=1.8\times 10^{6}$ and $h/\unicode[STIX]{x1D6FF}=0.47$. It is demonstrated that the stagnation point on the upstream side of the cube and the reattachment length in the wake of the cube are independent of the incoming profile for the conditions investigated here. In contrast, the wake length monotonically decreases for increasing turbulence intensity but fixed normalised shear – both quantities measured at the cube height. The wake shortening is a result of heightened turbulence levels promoting wake recovery from high local velocities and the reduction in strength of a dominant shedding frequency.

Influence of Free-Stream Turbulence on Turbulent Boundary Layer Heat Transfer and Mean Profile Development, Part I—Experimental Data

1983 ◽  
Vol 105 (1) ◽  
pp. 33-40 ◽  
Author(s):  
M. F. Blair
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Boundary Layer Flow ◽  
Free Stream ◽  
Full Range ◽  
Stream Velocity ◽  
Free Stream Turbulence ◽  
Turbulent Boundary Layer Flow ◽  
Layer Flow

An experimental research program was conducted to determine the influence of free-stream turbulence on zero pressure gradient, fully turbulent boundary layer flow. Connective heat transfer coefficients and boundary layer mean velocity and temperature profile data were obtained for a constant free-stream velocity of 30 m/s and free-stream turbulence intensities ranging from approximately 1/4 to 7 percent. Free-stream multicomponent turbulence intensity, longitudinal integral scale, and spectral distributions were obtained for the full range of turbulence levels. The test results with 1/4 percent free-stream turbulence indicate that these data were in excellent agreement with classic two-dimensional, low free-stream turbulence, turbulent boundary layer correlations. For fully turbulent boundary layer flow, both the skin friction and heat transfer were found to be substantially increased (up to ∼ 20 percent) for the higher levels of free-stream turbulence. Detailed results of the experimental study are presented in the present paper (Part I). A comprehensive analysis is provided in a companion paper (Part II).

Effect of free-stream turbulence on surface friction in a turbulent boundary layer

1995 ◽  
Vol 30 (2) ◽  
pp. 210-218 ◽  
Author(s):  
V. K. Kuzenkov ◽  
V. N. Levitskii ◽  
E. U. Repik ◽  
Yu. P. Sosedko
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Free Stream ◽  
Surface Friction ◽  
Free Stream Turbulence
Sign in / Sign up

Export Citation Format

Share Document