Sand flow liquefaction instability under shear–volume coupled strain paths

Géotechnique ◽  
2018 ◽  
Vol 68 (11) ◽  
pp. 1002-1024 ◽  
Author(s):  
A. Lashkari ◽  
M. S. Yaghtin
2000 ◽  
Vol 37 (3) ◽  
pp. 563-591 ◽  
Author(s):  
P K Robertson ◽  
C E (Fear) Wride ◽  
B R List ◽  
U Atukorala ◽  
K W Biggar ◽  
...  

The Canadian geotechnical engineering community has completed a major collaborative 5 year research project entitled the Canadian Liquefaction Experiment (CANLEX). The main objective of the project was to study the phenomenon of soil liquefaction, which can occur in saturated sandy soils and is characterized by a large loss of strength or stiffness resulting in substantial deformations. The intent of this paper is to compare, interpret, and summarize the large amount of field and laboratory data obtained for six sites in Western Canada as part of the CANLEX project. The sites are compared in terms of both flow-liquefaction and cyclic-softening considerations. The paper presents a number of conclusions drawn from the project as a whole, in terms of both fundamental and practical significance.Key words: sand, flow liquefaction, cyclic softening, CANLEX.


1986 ◽  
Vol 77 (2) ◽  
pp. 99-125 ◽  
Author(s):  
R. D. Law ◽  
M. Casey ◽  
R. J. Knipe

ABSTRACTUsing a combination of optical microscopy and X-ray texture goniometry, an integrated microstructural and crystallographic fabric study has been made of quartz mylonites from thrust sheets located beneath, but immediately adjacent to, the Moine thrust in the Assynt and Eriboll regions of NW Scotland. A correlation is established between shape fabric symmetry and pattern of crystallographic preferred orientation, a particularly clear relationship being observed between shape fabric variation and quartza-axis fabrics.Coaxial strain paths dominate the internal parts of the thrust sheets and are indicated by quartzc- anda-axis fabrics which are symmetrical with respect to foliation and lineation. Non-coaxial strain paths are indicated within the more intensely deformed quartzites located near the boundaries of the sheets by asymmetricalc- anda-axis fabrics. These kinematic interpretations are supported by microstructural studies. At the Stack of Glencoul in the northern part of the Assynt region, the transition zone between these kinematic (strain path) domains is located at approximately 20 cm beneath the Moine thrust and is marked by a progression from symmetrical cross-girdlec-axis fabrics (30cm beneath the thrust), through asymmetrical cross-girdlec-axis fabrics to asymmetrical single girdlec-axis fabrics (0·5 cm beneath the thrust).Tectonic models (incorporating processes such as extensional flow, gravity spreading and tectonic loading) which may account for the presence of strain path domains within the thrust sheets are considered, and their compatibility with local thrust sheet geometries assessed.


2006 ◽  
Vol 519-521 ◽  
pp. 1563-1568 ◽  
Author(s):  
Olaf Engler

In order to predict the mechanical properties of Al sheet products, the evolution of microstructure and crystallographic texture along the process chain must be tracked. During the thermo-mechanical processing in commercial production lines the material experiences a complex history of temperature, time and strain paths, which results in alternating cycles of deformation and recrystallization with the associated changes in texture and microstructure. In the present paper the texture evolution of AA 3104 can body stock is modelled. In particular, the earing behaviour at final gauge is linked to the decisive steps of deformation and recrystallization along the thermomechanical process chain. For this purpose, the textures predicted by a comprehensive throughprocess model of the texture evolution during the thermo-mechanical production of Al sheet are input into a polycrystal-plasticity approach to simulate earing of the final gauge sheets.


2013 ◽  
Vol 768-769 ◽  
pp. 60-65 ◽  
Author(s):  
Julia Repper ◽  
Markus Niffenegger ◽  
Steven van Petegem ◽  
Werner Wagner ◽  
Helena van Swygenhoven

Complex strain paths are often applied to materials during production processes. This paper shows the first successful in-situ biaxial mechanical tests during neutron diffraction performed on a cruciform steel sample and reports on the differences compared to uniaxial deformation. Digital image correlation is demonstrated to be an appropriate tool to monitor spatially resolved the macroscopic straining. The new, modular biaxial machine that will be installed at the neutron diffractometer POLDI is presented.


2014 ◽  
Vol 40 ◽  
pp. 102-108 ◽  
Author(s):  
Wei Li ◽  
Yingguang Fang ◽  
Haihong Mo ◽  
Renguo Gu ◽  
Junsheng Chen ◽  
...  
Keyword(s):  

2014 ◽  
Vol 10 (1) ◽  
pp. 83-100 ◽  
Author(s):  
Toktam Mohammadnejad ◽  
José E. Andrade

Sign in / Sign up

Export Citation Format

Share Document