Punching shear testing of reinforced concrete slabs, and design implications

2005 ◽  
Vol 57 (3) ◽  
pp. 167-177 ◽  
Author(s):  
K. V. Papanikolaou ◽  
I. A. Tegos ◽  
A. J. Kappos
Keyword(s):  
Reinforced Concrete ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Shear Testing ◽  
Reinforced Concrete Slabs

Critical shear crack theory-based punching shear model for FRP-reinforced concrete slabs

2020 ◽  
pp. 136943322097814
Author(s):  
Xing-lang Fan ◽  
Sheng-jie Gu ◽  
Xi Wu ◽  
Jia-fei Jiang
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Shear Crack ◽  
Concrete Strength ◽  
Weight Ratio ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Crack Theory ◽  
Reinforced Concrete Slabs ◽  
Rc Slabs

Owing to their high strength-to-weight ratio, superior corrosion resistance, and convenience in manufacture, fiber-reinforced polymer (FRP) bars can be used as a good alternative to steel bars to solve the durability issue in reinforced concrete (RC) structures, especially for seawater sea-sand concrete. In this paper, a theoretical model for predicting the punching shear strength of FRP-RC slabs is developed. In this model, the punching shear strength is determined by the intersection of capacity and demanding curve of FRP-RC slabs. The capacity curve is employed based on critical shear crack theory, while the demand curve is derived with the help of a simplified tri-linear moment-curvature relationship. After the validity of the proposed model is verified with experimental data collected from the literature, the effects of concrete strength, loading area, FRP reinforcement ratio, and effective depth of concrete slabs are evaluated quantitatively.

Punching shear behaviour of shear reinforced concrete slabs

2015 ◽  
Vol 168 (6) ◽  
pp. 402-420 ◽  
Author(s):  
Kyoung-Kyu Choi ◽  
Gia Toai Truong ◽  
Seon-Du Kim ◽  
In-Rak Choi
Keyword(s):  
Reinforced Concrete ◽  
Punching Shear ◽  
Shear Behaviour ◽  
Concrete Slabs ◽  
Reinforced Concrete Slabs

Punching shear strength of reinforced concrete slabs with plastic void formers

2017 ◽  
Vol 145 ◽  
pp. 518-527 ◽  
Author(s):  
Juozas Valivonis ◽  
Tomas Skuturna ◽  
Mykolas Daugevičius ◽  
Arnoldas Šneideris
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Reinforced Concrete Slabs

scholarly journals Punching shear behavior of thick reinforced concrete slabs according to Strut-and-Tie model

2014 ◽  
Vol 13 (3) ◽  
pp. 183-192
Author(s):  
Tadeusz Urban ◽  
Jakub Krakowski
Keyword(s):  
Reinforced Concrete ◽  
Experimental Test ◽  
Shear Behavior ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Test Results ◽  
Strut And Tie ◽  
Reinforced Concrete Slabs ◽  
Symmetric Loading ◽  
Strut And Tie Model

The punching shear behavior of thick reinforced concrete slabs was analyzed in this paper by using strut-and-tie model (S-T). Calculating procedures were compared to our own experimental test results. The analyzed elements were subjected to symmetric loading and without shear reinforcement.

scholarly journals Prediction of Punching Shear Capacity of Two-Ways FRP Reinforced Concrete Slabs

2017 ◽  
Vol 5 (2) ◽  
pp. 1-7
Author(s):  
Ilker Kara ◽  
Besian Sinani
Keyword(s):  
Reinforced Concrete ◽  
Concrete Structures ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Punching Shear ◽  
Concrete Slabs ◽  
Design Standards ◽  
Concrete Members ◽  
Reinforced Concrete Slabs ◽  
Frp Reinforcement

An innovative solution to the corrosion problem is the use of fiber-reinforced polymer (FRP) as an alternative reinforcing material in concrete structures. In addition to the non corrodible nature of FRP materials, they also have a high strength-to-weight ratio that makes them attractive as reinforcement for concrete structures. Extensive research programs have been carried out to investigate the flexural behavior of concrete members reinforced with FRP reinforcement. On the other hand, the shear behavior of concrete members, especially punching shear of two-way slabs, reinforced with FRP bars has not yet been fully explored. The existing provisions for punching of slabs in most international design standards for reinforced concrete are based on tests of steel reinforced slabs. The elastic stiffness and bonding characteristics of FRP reinforcement are sufficiently different from those of steel to affect punching strength. In the present study, the equations of existing design standards for shear capacity of FRP reinforced concrete beams have been evaluated using the large database collected. The experimental punching shear strengths were compared with the available theoretical predictions, including the CSA S806 (CSA 2012), ACI-440.1R-15 (ACI 2015), BS 8110 (BSI 1997), JSCE (1997) a number of models proposed by some researchers in the literature. The existing design methods for FRP reinforced concrete slabs give conservative predictions for the specimens in the database. This paper also presents a simple yet improved model to calculate the punching shear capacity of FRPreinforced concrete slabs. The proposed model provides the accurate results in calculating the punching shear strengths of FRP-reinforced concrete slender slabs.

Sign in / Sign up

Export Citation Format

Share Document