Non-sinusoidal voltage in power supply systems leads to economic losses that need to be distributed and compensated. This problem is solved on the basis of the problem of identification and evaluation of the influence of voltage distortion sources. To date, existing methods for identifying and assessing the impact of harmonic voltage sources have significant limitations of practical implementation. This is due to their basic mathematical model and local approach to measuring the parameters of the network. In the given research the new mathematical model of identification and an estimation of harmonic voltage sources that is focused on the distributed measuring system is presented. The criterion for identifying harmonic voltage sources is the distorting nodal current. To adequately determine it, it is necessary not only to measure the parameters of the network mode in the base nodes by the currents of the higher harmonic components, but also to control the structure and parameters of the replacement circuit of the entire power supply system. To achieve this goal, it is proposed to use a distributed measuring system, which is based on vector measurement systems and control systems. The estimation of the influence of harmonic voltage sources is directly proportional to the distorting nodal current, where the coefficient of proportionality is either mutual or intrinsic resistance of power supply systems, that connects the location of the distortion source and the place for which its influence is estimated. In order to control the influence of measurement errors and determine the parameters of circuits for replacing elements of the power supply system, the method and algorithm for identifying and assessing the impact of harmonic voltage sources should be developed based on the principle of excluding one of the voltage distortion sources.
Analysis of the Impact of Negative Network Disturbances of Rapidly Changing Nature on the Efficiency of the Functioning of Power Supply Systems