Vestnik Tambovskogo gosudarstvennogo tehnicheskogo universiteta
Latest Publications


TOTAL DOCUMENTS

506
(FIVE YEARS 194)

H-INDEX

2
(FIVE YEARS 1)

Published By Tambov State Technical University

2542-1409, 0136-5835

Author(s):  
I. Shauki ◽  
V. F. Kalinin ◽  
B. Ussama ◽  
A. Leshelakh

The paper considers a method for increasing the efficiency of energy conversion using a voltage source converter (VSC) in a microgrid network and issues of power control of power equipment at the present stage of technology development. Modeling of various energy systems using this method has been carried out.


Author(s):  
V. N. Dolgunin ◽  
O. O. Ivanov ◽  
S. A. Akopyan

Phenomenological approaches to describing the rheological behavior of granular materials under conditions of rapid and quasi-plastic shear deformations are considered. A unified approach to the phenomenological-logical description of the physical parameter, called the temperature of the granular medium, and the mechanisms of shear stress generation is proposed. A description is given of the mechanism for generating shear stresses under the action of a flow of pulses directed along the shear rate gradient and caused by transverse quasi-diffusion of particles. This mechanism is taken into account in the rheological model in addition to the traditional mechanism of generating kinetic shear stresses under the action of tangential shock pulses.


Author(s):  
D. M. Nenadovich ◽  
I. V. Markin

One of the main goals of modernization of telecommunication networks is to increase its performance. For a quantitative assessment of the success of improving the system, methods were developed for assessing the expert indicators of the performance quality of the designed digital telecommunication system, synthesized on the basis of previously developed decomposition and reduction algorithms. The main expert indicators of the performance quality of the designed system are considered, the dependences for calculating these indicators are presented.


Author(s):  
S. I. Lazarev ◽  
O. V. Lomakina ◽  
V. E. Bulanov ◽  
I. V. Khorokhorina

The paper considers works on methods for calculating design and technological parameters, design of membrane equipment, research of technological features of membrane devices, selection of design schemes, methods for calculating strength and stiffness. A method has been developed for calculating mechanical loads and determining the thickness of plates and toroidal shells of a membrane apparatus of the combined type, which makes it possible to assess the strength properties of apparatus of this class. An example of a calculation, which makes it possible to assess the adequacy of the application of this technique to devices of the combined type, is given.


Author(s):  
A. D. Nakhman

We study a one-parameter family of convolutional operators acting in Lebesgue Lp spaces. The case of integral kernels given by the Fourier coefficients is considered. It is established that the condition of the coefficients being quasiconvex ensures the boundedness of the corresponding maximal operators. The limiting behavior of families in the metrics of spaces of continuous functions and Lp, p ≥ 1, classes is studied, and their convergence is obtained almost everywhere. The ways of possible generalizations and distributions are indicated.


Author(s):  
A. D. Loskutova ◽  
A. P. Korolev

The analysis of properties of thermosensitive elements used in devices for monitoring the temperature and thermophysical properties of the medium and materials is carried out. Thermal converters made of various materials are considered: metals, semiconductors, oxides. The sensitivity to infrared radiation of the considered elements is analyzed. The range of measured temperatures and the linearity of the output characteristics of the converters are investigated. A conclusion is made about the purposefulness of using one or another type of thermosensitive elements.


Author(s):  
S. V. Ponomarev ◽  
◽  
S. V. Mishchenko ◽  

The paper considers the possibility of using a single version of the design of the measuring cell as part of an installation for measuring the thermophysical properties of solid materials using the methods of regular modes of the first, second and third kind.


Author(s):  
V. V. Alekseev ◽  
◽  
V. A. Gridnev ◽  
A. V. Yakovlev ◽  
O. S. Mashkova ◽  
...  

In order to train specialists in information security (IS), a software and hardware complex “Means of protecting information from leakage through technical channels” has been developed; it provides an opportunity to study the process of information leakage through technical channels and methods of its protection, as well as apply various modules and additional software (software) that clearly demonstrate the features of various methods of information security. The composition of this complex is shown: laboratory stands simulating acoustic, vibroacoustic, acoustoelectric channels and a channel of side electromagnetic radiation and interference. At each of the stands there are information security means (ISMs) that prevent the leakage of confidential information through the corresponding technical channel. To adjust the ISMs for acoustic and vibroacoustic channels, the ISIDORA software has been developed; it allows adjusting the level of the generated acoustic interference to meet the requirements of the security of the room and at the same time to have a comfortable conversation in this room.


Author(s):  
E. I. Martyanov ◽  
S. V. Karpushkin ◽  
V. V. Alekseev

: The paper proposes a methodology for the development of a control and optimization system, which is used to solve the design problems of technical complex systems. The systems developed on the basis of this methodology are easy to use and create more accurate estimates of the values of the parameters of technical complex systems than using traditional methods based on solving empirical equations. An example of the implementation of the proposed methodology is a problem-oriented system designed to optimize the parameters of a two-blade mixer of a vertical capacitive apparatus.


Author(s):  
E. I. Akulinin ◽  
D. S. Dvoretsky ◽  
S. I. Dvoretsky

For mass transfer cyclic processes in the “adsorptive - porous adsorbent” system when air is enriched with oxygen by the method of short-cycle heatless adsorption, a new method has been implemented for determining the coefficients of mass transfer and mass conductivity of processes in systems with a solid phase from kinetic curves. It has been experimentally proved that during the adsorption separation of atmospheric air, the rate of cyclic “adsorption - desorption” processes can be limited by both internal and external diffusion resistance. The mass conductivity coefficients are determined depending on the mass content of the distributed adsorptive (O2, N2) by a method that does not require the implementation of the intradiffusion kinetic regime. The analysis of the kinetics of the process of air enrichment with oxygen is carried out; the coefficients of mass transfer and mass conductivity, which can be used in kinetic calculations and numerical study of the properties and modes of the cyclic adsorption process of atmospheric air separation and oxygen concentration, are determined.


Sign in / Sign up

Export Citation Format

Share Document