Abstract
Recently, natural filler reinforced polymer composites are important materials for various engineering applications. Hence, this present work focuses on utilization of coconut shell powder (CSP) as a filler in vinyl ester (VE) resin to produce particulate composite specimens. The particulate composite plates with various weights or filler contents from 5 to 30 wt% were fabricated, using compression molding technique. The fabricated composites were subjected to tensile, flexural, impact, hardness, heat deflection and swelling behavior tests to obtain their corresponding material properties. Energy dispersive X-ray (EDX) analysis was carried out on the coconut shell powder/vinyl ester (CSP/VE) composite specimens to investigate into the presence of their elements, in addition to the aforementioned tests. From the experimental results obtained, it was observed that the optimum mechanical properties of CSP/VE composites were obtained at 15 wt% of filler content, having tensile, flexural and impact strengths of 38.70, 105.13 MPa and 33.04 kJ/m2, respectively. Also, the heat deflection temperature (HDT) results varied from 158 (0 wt%, neat VE resin) to 171 oC along various percentages of filler contents. Lastly, the morphological study/analysis of the fractured CSP/VE composite specimens was conducted by using a scanning electron microscope (SEM) to confirm the experimental data/results obtained. It was evident that CSP/VE composite structures could be potential substitutes for some synthetic composites. Also, they are suitable for various engineering applications in aerospace, electrical/electronics and automobile industries, based on their properties.
Fabrication and Comparative Study on the Mechanical Properties of Epoxy based Polymer Composites with Coconut Shell Powder and Rice Husk Powder as Filler Materials
