scholarly journals Analysis of components of the cutting force and stresses in the surface layer using the finite element method in machining of the Ti6Al4V titanium alloy

Mechanik ◽  
2015 ◽  
pp. 720/037-720/045
Author(s):  
Jan Burek ◽  
Karol Żurawski ◽  
Piotr Żurek
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Titanium Alloy ◽  
Surface Layer ◽  
Cutting Force ◽  
The Finite Element Method ◽  
Ti6al4v Titanium Alloy ◽  
Element Method

scholarly journals Cutting Force Predication Based on Integration of Symmetric Fuzzy Number and Finite Element Method

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Zhanli Wang ◽  
Yanjuan Hu ◽  
Yao Wang ◽  
Chao Dong ◽  
Zaixiang Pang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Cutting Force ◽  
Fuzzy Number ◽  
Experimental Result ◽  
The Finite Element Method ◽  
Mechanical Coupling ◽  
Fuzzy Function ◽  
Nonuniform Stress Field ◽  
Element Method

In the process of turning, pointing at the uncertain phenomenon of cutting which is caused by the disturbance of random factors, for determining the uncertain scope of cutting force, the integrated symmetric fuzzy number and the finite element method (FEM) are used in the prediction of cutting force. The method used symmetric fuzzy number to establish fuzzy function between cutting force and three factors and obtained the uncertain interval of cutting force by linear programming. At the same time, the change curve of cutting force with time was directly simulated by using thermal-mechanical coupling FEM; also the nonuniform stress field and temperature distribution of workpiece, tool, and chip under the action of thermal-mechanical coupling were simulated. The experimental result shows that the method is effective for the uncertain prediction of cutting force.

Application of FEM Modeling to Simulate Metal Flow in Forging a Titanium Alloy Engine Disk

1983 ◽  
Vol 105 (4) ◽  
pp. 251-258 ◽  
Author(s):  
S. I. Oh ◽  
J. J. Park ◽  
S. Kobayashi ◽  
T. Altan
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Titanium Alloy ◽  
Metal Flow ◽  
The Finite Element Method ◽  
Fem Modeling ◽  
Forging Process ◽  
Deformation Mechanics ◽  
Effects Of Temperature ◽  
Element Method

The isothermal forging of a titanium alloy engine disk is analyzed by the rigid-viscoplastic finite element method. Deformation mechanics of the forging process are discussed, based on the solution. The effects of temperature and heat conduction on the forging process are also investigated by coupled thermo-viscoplastic analysis. Since the dual microstructure / property titanium disk can be obtained by controlling strain distribution during forging, the process modeling by the finite element method is especially attractive.

scholarly journals Finite element simulations of conventional and ultrasonically assisted turning processes with plane and textured cutting inserts

2019 ◽  
Vol 3 (1) ◽  
pp. 54-68
Author(s):  
Varun Sharma ◽  
Pulak M. Pandey ◽  
Uday S. Dixit ◽  
Anish Roy ◽  
Vadim V. Silberschmidt
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Cutting Force ◽  
Cutting Forces ◽  
The Finite Element Method ◽  
Turning Process ◽  
Texture Pattern ◽  
Cutting Inserts ◽  
Force Variation ◽  
Element Method

This paper investigates the performance of conventional turning and ultrasonically assisted turning (UAT) processes with plane and textured cutting inserts. Simulations based on the finite-element method were carried out using a software package ABAQUS/Explicit (Dassault Systemes, France). The obtained results were validated experimentally by employing a specially developed UAT setup. The purpose of the paper is to analyze cutting-force variation by the use of textured cutting inserts. Optimized dimensions of the texture pattern were used to model textured cutting inserts. The cutting-force variation in UAT was assessed with finite-element method, confirming diminishing cutting forces at a tool–workpiece interface during a noncontact time. The use of the textured cutting inserts in the UAT process resulted in the lowest cutting forces when compared to a plane tool in UAT as well as both plane and textured tools in the conventional turning process.

Simulation of tuning graphene plasmonic behaviors by ferroelectric domains for self-driven infrared photodetector applications

Nanoscale ◽  
2019 ◽  
Vol 11 (43) ◽  
pp. 20868-20875 ◽  
Author(s):  
Junxiong Guo ◽  
Yu Liu ◽  
Yuan Lin ◽  
Yu Tian ◽  
Jinxing Zhang ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Interfacial Effect ◽  
Infrared Photodetector ◽  
The Finite Element Method ◽  
Ferroelectric Domains ◽  
Element Method

We propose a graphene plasmonic infrared photodetector tuned by ferroelectric domains and investigate the interfacial effect using the finite element method.

Sign in / Sign up

Export Citation Format

Share Document