scholarly journals Study on glenoid component in anatomical total shoulder arthroplasty in Nagapattinam district

2021 ◽  
Vol 7 (2) ◽  
pp. 223
Author(s):  
A. Palanivel
Keyword(s):  
Outcome Measures ◽  
Shoulder Arthroplasty ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Randomized Study ◽  
Shoulder Function ◽  
Glenoid Component ◽  
Screw Breakage ◽  
Pain At Rest

<p class="abstract"><strong>Background:</strong> Depending upon the mechanism of dysfunction or injury a shoulder arthroplasty can either be a partial or total replacement. Shoulder arthroplasty surgery has shown remarkable progress during the last few decades. The objective was to study the effect of prosthesis positioning in reverse shoulder arthroplasty on radiological and clinical outcomes.</p><p class="abstract"><strong>Methods:</strong> This was a prospective comparative non-randomized study of 37 patients who underwent reverse shoulder arthroplasty (RSA) in Government District Head Quarters Hospital Nagapattinam with a follow-up ranging from March 2018 to January 2019 (11 months).<strong></strong></p><p class="abstract"><strong>Results:</strong> Grade 1 indicated a notch limited to the scapular pillar, grade 2 reached the inferior screw of the baseplate, grade 3 extended beyond the inferior screw and grade 4 reached the central peg of the baseplate. Glenoid loosening was defined as radiolucencies under the baseplate or around the peg or screws, screw breakage, or glenoid migration.</p><p class="abstract"><strong>Conclusions:</strong> Outcome measures were improved regardless of the LHO. At 3 months follow-up increased LHO harmed shoulder function and gave more shoulder pain at rest and exertion but did not affect the quality of life, health status, or ROM. At 12 months follow-up, LHO had no relation with the outcome measures. Further studies are warranted to investigate the influence of LHO on long-term prosthetic survival.</p>

scholarly journals Short-Term Outcomes of the Grammont Reverse Shoulder Arthroplasty: Comparison between First and Second Generation Delta Prosthesis

Joints ◽  
2021 ◽  
Author(s):  
Riccardo Luigi Alberio ◽  
Marco Landrino ◽  
Paolo Fornara ◽  
Federico Alberto Grassi
Keyword(s):  
Shoulder Arthroplasty ◽  
Second Generation ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Radiographic Evaluation ◽  
Glenoid Component ◽  
Consecutive Series ◽  
Short Term ◽  
Component Loosening

Abstract Purpose This article compares short-term outcomes of two series of patients, who underwent reverse total shoulder arthroplasty (RTSA) with two different implants, both based on Grammont's principles: the Delta III (D-3) and the Delta Xtend (D-XT) prostheses. Methods The D-3 group included a consecutive series of 26 patients (mean age 75 years), that were treated between 2000 and 2006; the D-XT group included a consecutive series of 31 patients (mean age 72.5 years), for a total of 33 implants performed between 2011 and 2015. In both groups the most common diagnoses were cuff tear arthropathy (18 and 22 shoulders, respectively) and malunion of proximal humerus fractures (3 and 5). All procedures were performed by the same surgeon. Constant–Murley score (CMS) was used to assess clinical and functional outcomes. Radiographic evaluation included the true anteroposterior and axillary views. Results Twenty-three patients of the D-3 group and 22 patients (24 shoulders) of the D-XT group were evaluated at a mean follow-up of 42 months (range 26–84) and 44 months (range 26–66), respectively. Four complications occurred in the D-3 group (1 partial deltoid detachment, 1 dislocation, and 2 glenoid component loosening), while one early postoperative infection occurred in the D-XT group. Increases in elevation and CMS between preoperative and postoperative period were observed in both groups; only the D-XT group showed a slight improvement in rotations. The incidence of scapular notching was significantly different between the two groups: 100% for D-3 and 22.2% for D-XT in patients with a minimum follow-up of 5 years. Conclusion Prosthetic design evolution and greater acquaintance with this surgery have undoubtedly led to an improvement in short-term outcomes with second generation implants of RTSA. Future studies will have to ascertain whether newer implants, relying on biomechanical solutions alternative to Grammont's original concept, might provide additional advantages and minimize drawbacks.

scholarly journals Pre-Operative CT-Based Planning Integrated With Intra-Operative Navigation in Reverse Shoulder Arthroplasty: Data Acquisition and Analysis Protocol, and Preliminary Results of Navigated Versus Conventional Surgery

Dose-Response ◽  
2020 ◽  
Vol 18 (4) ◽  
pp. 155932582097083
Author(s):  
Fabio Moreschini ◽  
Giovanni Battista Colasanti ◽  
Carlo Cataldi ◽  
Lorenzo Mannelli ◽  
Nicola Mondanelli ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Conventional Technique ◽  
Shoulder Function ◽  
Glenoid Component ◽  
Navigation Group ◽  
Screw Length ◽  
Operative Planning ◽  
Glenoid Baseplate

Reverse total shoulder arthroplasty (RSA) successfully restores shoulder function in different conditions. Glenoid baseplate fixation and positioning seem to be the most important factors influencing RSA survival. When scapular anatomy is distorted (eccentric osteoarthrirtis, rotator cuff arthropathy), optimal baseplate positioning and secure screw purchase can be challenging. The aim of this study was to evaluate whether CT-based pre-operative planning, integrated with intra-operative navigation could improve glenoid baseplate fixation and positioning by increasing screw length, reducing number of screws required to obtain fixation and increasing the use of augmented baseplate to gain the desired positioning. Twenty patients who underwent navigated RSA were compared retrospectively with 20 patients operated on with a conventional technique. All the procedures were performed by the same surgeon, using the same implant. Mean screw length was significantly longer in the navigation group (35.5 ± 4.4 mm vs 29.9 ± 3.6 mm; p = .001). Significant higher rate of optimal fixation using 2 screws only (17 vs 3 cases, p = .019) and higher rate of augmented baseplate usage (13 vs 4 cases, p = .009) was also present in the navigation group. Pre-operative CT-based planning integrated with intra-operative navigation can improve glenoid component positioning and fixation, possibly leading to an improvement of RSA survival.

scholarly journals Journey of the glenoid in anatomic total shoulder replacement

2018 ◽  
Vol 11 (2) ◽  
pp. 140-148 ◽  
Author(s):  
Alessandro Castagna ◽  
Raffaele Garofalo
Keyword(s):  
Shoulder Arthroplasty ◽  
Current Practice ◽  
Total Shoulder Arthroplasty ◽  
Shoulder Function ◽  
Patient Specific ◽  
Glenoid Component ◽  
Shoulder Replacement ◽  
Final Destination ◽  
Component Loosening

Anatomic total shoulder arthroplasty (TSR) has been shown to generate good to excellent results for patients with osteoarthritis and a functioning rotator cuff. Many studies have reported that the glenoid component loosening and failure remain the most common long-term complication of total shoulder arthroplasty. The approach to glenoid component is critical because a surgeon should consider patient-specific anatomy, preserving bone stock and joint line restoration, for a good and durable shoulder function. Over the years, different glenoid design and materials have been tried in various configurations. These include cemented polyethylene, uncemented metal-backed and hybrid implants. Although advances in biomechanics, design and tribology have improved our understanding of the glenoid, the journey of the glenoid component in anatomic total shoulder arthroplasty has not yet reached its final destination. This article attempts to describe the evolution of the glenoid component in anatomic TSR and current practice.

Anatomic versus reverse shoulder arthroplasty: a mid-term follow-up comparison

2020 ◽  
pp. 175857322092115
Author(s):  
Bradley S Schoch ◽  
Joseph J King ◽  
Joseph Zuckerman ◽  
Thomas W Wright ◽  
Chris Roche ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Patient Reported Outcomes ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Reoperation Rate ◽  
Patient Reported ◽  
Total Shoulder Arthroplasties ◽  
Shoulder Arthroplasties

Background Anatomic total shoulder arthroplasty improves pain and function with a reported reoperation rate of approximately 1% per year. With improved glenoid fixation, reverse shoulder arthroplasty implants may outperform anatomic total shoulder arthroplasty. We evaluate the functional outcomes and reoperation rate of anatomic total shoulder arthroplasty versus reverse shoulder arthroplasty at a minimum eight-year follow-up or revision. Methods Between 2005 and 2010, 187 shoulders (137 anatomic total shoulder arthroplasty, 50 reverse shoulder arthroplasty) were retrospectively reviewed at a mean of 8.8 years. The mean age at surgery was 67 years. Females were more commonly treated with reverse shoulder arthroplasty. Both groups had similar body mass index and comorbidities. Outcome measures evaluated included abduction, forward elevation, external rotation, internal rotation, Simple Shoulder Test, Constant score, American Shoulder and Elbow Score, University of California Los Angeles Shoulder score, and Shoulder Pain and Disability Index. Results At follow-up, anatomic total shoulder arthroplasty demonstrated greater overhead range of motion and external rotation. All patient-reported outcomes remained similar between groups. Reverse shoulder arthroplasty patients were more likely to rate shoulders as much better or better after surgery (90% versus 67%, p = 0.004). Complications were observed in 24% of anatomic total shoulder arthroplasties and 8% of reverse shoulder arthroplasties (p = 0.02). Reoperation was more common in anatomic total shoulder arthroplasties (23% versus 4%, p = 0.003). Discussion At mid-to-long-term follow-up, reverse shoulder arthroplasties demonstrated significantly fewer complications and reoperations than anatomic total shoulder arthroplasties. Despite similar patient-reported outcomes, reverse shoulder arthroplasty patients were more likely to be satisfied with their shoulder.

scholarly journals Anatomic total shoulder arthroplasty with posterior capsular plication versus reverse shoulder arthroplasty in patients with biconcave glenoids: A matched cohort study

2018 ◽  
Vol 26 (2) ◽  
pp. 230949901876857 ◽  
Author(s):  
Eduard Alentorn-Geli ◽  
Nathan R Wanderman ◽  
Andrew T Assenmacher ◽  
John W Sperling ◽  
Robert H Cofield ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Simple Shoulder Test ◽  
Posterior Subluxation ◽  
The Mean ◽  
Group 2 ◽  
And Function ◽  
Group 1

Purpose: To compare the outcomes of total shoulder arthroplasty (TSA) with posterior capsule plication (PCP) and reverse shoulder arthroplasty (RSA) in patients with primary osteoarthritis, posterior subluxation, and bone loss (Walch B2). Patients and methods: All shoulders undergoing anatomic TSA with PCP were retrospectively identified (group 1, G1) and compared to shoulders undergoing RSA (group 2, G2) for Walch B2 osteoarthritis. There were 15 patients in G1 (mean (SD) age and follow-up of 70.5 (7.5) years and 42.8 (18.4) months, respectively) and 16 patients in G2 (mean (SD) age and follow-up of 72.6 (5.4) years and 35.1 (14.2) months, respectively). Results: Both groups had substantial improvements in pain and function. In G1, results were excellent in 80% and satisfactory in 20%, compared to 81% and 6% in G2, respectively ( p = 0.2). The mean (SD) American Shoulder and Elbow Surgeons score was 91.2 (6.7) and 80.3 (14.3) in G1 and G2, respectively ( p = 0.08). The mean Simple Shoulder Test score was 10.6 in G1 and 8.5 in G2 ( p = 0.01). There were no reoperations in either group, but G1 had seven postoperative complications. Conclusions: The outcomes of TSA with PCP are comparable to RSA in patients with osteoarthritis and biconcave glenoids. However, TSA leads to more complications while RSA leads to lower functional outcomes.

scholarly journals Anatomic Total Shoulder Arthroplasty Using a Self-Pressurizing Pegged Bone-Preserving Cemented Glenoid Component: A 2- to 5-Year Follow-up Study

2018 ◽  
Vol 2 ◽  
pp. 247154921775047
Author(s):  
Joaquin Sanchez-Sotelo ◽  
Ngoc Tram V Nguyen ◽  
Mark Morrey
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Loose Body ◽  
Deep Infection ◽  
Glenoid Component ◽  
Total Shoulder Arthroplasties ◽  
Shoulder Arthroplasties ◽  
And Function

Background: High rates of radiographic loosening have been reported with various glenoid designs. Many available designs sacrifice most of the bone at the central portion of the glenoid vault, creating large areas of deficiency when revision becomes necessary. The purpose of this study was to report the 2- to 5-year outcome of shoulder arthroplasty using a bone-preserving all-polyethylene glenoid components with self-pressurizing pegs. Methods: Between August 2011 and December 2014, 202 consecutive anatomic total shoulder arthroplasties (TSAs) were performed by a single surgeon with implantation of a self-pressurizing cemented pegged glenoid component in 190 patients (12 patients had both shoulders replaced). Patients were followed up prospectively and evaluated for pain, motion, strength, American Shoulder and Elbow Surgeons (ASES) scores, and radiographic changes. The mean follow-up time was 2.7 (2–5) years. Results: TSA improved pain and function reliably. At the most recent follow-up, 94% of the shoulders had no or mild pain. Motion included 154 ± 25° of elevation, 68 ± 18° of external rotation, and median internal rotation to T10 (range, iliac crest to T4). The most recent average ASES score was 82 ± 15 points. Early postoperative radiographs showed no radiolucent lines. No humeral or glenoid component was considered radiographically loose at the most recent follow-up. Complications requiring reoperation included subscapularis insufficiency (4), posterior instability (2), deep infection (1), stiffness (1), and a painful loose body (1). No components were revised for loosening. Conclusions: Anatomic TSA using a cemented bone-preserving all-polyethylene pegged self-pressurizing glenoid component provided satisfactory clinical outcomes and survival at 2 to 5 years.

scholarly journals Anatomical and reverse shoulder arthroplasty utilizing a single implant system with a platform stem: A prospective observational study with midterm follow-up

2019 ◽  
Vol 12 (5) ◽  
pp. 330-337
Author(s):  
Lindsay Flynn ◽  
Matthew R Patrick ◽  
Christopher Roche ◽  
Joseph D Zuckerman ◽  
Pierre-Henri Flurin ◽  
...  
Keyword(s):  
Los Angeles ◽  
Range Of Motion ◽  
Shoulder Arthroplasty ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Reverse Total Shoulder Arthroplasty ◽  
Outcome Scores ◽  
Implant System ◽  
Reverse Total Shoulder

Background No studies compare outcomes of anatomic total shoulder arthroplasty to reverse total shoulder arthroplasty with more than five-year follow-up. Methods A multicenter prospectively collected shoulder registry was utilized to review all patients undergoing primary anatomic total shoulder arthroplasty or primary reverse total shoulder arthroplasty with a minimum five-year follow-up utilizing a single platform stem implant system. One-hundred-ninety-one patients received an anatomic total shoulder arthroplasty and 139 patients received a reverse total shoulder arthroplasty. Patients were scored preoperatively and at latest follow-up using the simple shoulder test (SST), University of California Los Angeles (UCLA), American shoulder and elbow surgeons (ASES), Constant, and shoulder pain and disability index (SADI) scores as well as range of motion. Radiographs were evaluated for implant loosening or notching. Complications were reviewed. A Student’s two-tailed, unpaired t-test identified differences in preoperative, postoperative, and pre-to-postoperative improvements. Results Reverse total shoulder arthroplasty patients were significantly older than anatomic total shoulder arthroplasty patients. All patients demonstrated significant improvement in functional metric scores and range of motion following anatomic total shoulder arthroplasty or reverse total shoulder arthroplasty. There was no difference in final outcome scores between anatomic total shoulder arthroplasty and reverse total shoulder arthroplasty patients at midterm follow-up; however, reverse total shoulder arthroplasty patients demonstrated significantly less motion. Discussion We demonstrate equivalent outcomes with five scoring metrics at mean follow-up of 71.3 ± 14.1 months. Although postoperative scores were significantly greater than preoperative scores for both anatomic total shoulder arthroplasty and reverse total shoulder arthroplasty patients, significant differences in outcome scores between cohorts were not observed.

scholarly journals Anatomical total shoulder arthroplasty in young patients with osteoarthritis

2018 ◽  
Vol 100-B (4) ◽  
pp. 485-492 ◽  
Author(s):  
M. O. Gauci ◽  
N. Bonnevialle ◽  
G. Moineau ◽  
M. Baba ◽  
G. Walch ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Polyethylene Wear ◽  
Total Shoulder Arthroplasty ◽  
Young Patients ◽  
Glenoid Component ◽  
Implant Survival ◽  
Survivorship Analysis ◽  
Kaplan Meier ◽  
Glenoid Loosening

Aims Controversy about the use of an anatomical total shoulder arthroplasty (aTSA) in young arthritic patients relates to which is the ideal form of fixation for the glenoid component: cemented or cementless. This study aimed to evaluate implant survival of aTSA when used in patients aged < 60 years with primary glenohumeral osteoarthritis (OA), and to compare the survival of cemented all-polyethylene and cementless metal-backed glenoid components. Materials and Methods A total of 69 consecutive aTSAs were performed in 67 patients aged < 60 years with primary glenohumeral OA. Their mean age at the time of surgery was 54 years (35 to 60). Of these aTSAs, 46 were undertaken using a cemented polyethylene component and 23 were undertaken using a cementless metal-backed component. The age, gender, preoperative function, mobility, premorbid glenoid erosion, and length of follow-up were comparable in the two groups. The patients were reviewed clinically and radiographically at a mean of 10.3 years (5 to 12, sd 26) postoperatively. Kaplan–Meier survivorship analysis was performed with revision as the endpoint. Results A total of 26 shoulders (38%) underwent revision surgery: ten (22%) in the polyethylene group and 16 (70%) in the metal-backed group (p < 0.0001). At 12 years’ follow-up, the rate of implant survival was 74% (sd 0.09) for polyethylene components and 24% (sd 0.10) for metal-backed components (p < 0.0002). Glenoid loosening or failure was the indication for revision in the polyethylene group, whereas polyethylene wear with metal-on-metal contact, instability, and insufficiency of the rotator cuff were the indications for revision in the metal-backed group. Preoperative posterior subluxation of the humeral head with a biconcave/retroverted glenoid (Walch B2) had an adverse effect on the survival of a metal-backed component. Conclusion The survival of a cemented polyethylene glenoid component is three times higher than that of a cementless metal-backed glenoid component ten years after aTSA in patients aged < 60 years with primary glenohumeral OA. Patients with a biconcave (B2) glenoid have the highest risk of failure. Cite this article: Bone Joint J 2018;100-B:485–92.

scholarly journals Glenoid Component Loosening in Anatomic Total Shoulder Arthroplasty: Association between Radiological Predictors and Clinical Parameters—An Observational Study

2021 ◽  
Vol 10 (2) ◽  
pp. 234
Author(s):  
Alexandra Grob ◽  
Florian Freislederer ◽  
Alex Marzel ◽  
Laurent Audigé ◽  
Hans-Kaspar Schwyzer ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Mixed Model ◽  
Constant Score ◽  
Total Shoulder Arthroplasty ◽  
Shoulder Function ◽  
Glenoid Component ◽  
Joint Gap ◽  
Acromiohumeral Distance ◽  
One Year ◽  
Component Loosening

The mechanisms of glenoid component loosening in anatomic total shoulder arthroplasty (aTSA) are still unclear, and it remains undetermined which specific radiographic features are associated with clinical outcomes. Patients with primary osteoarthritis who underwent aTSA with a stemless implant and a pegged glenoid between January 2011 and December 2016 were extracted from a local registry. Anteroposterior radiographs were evaluated at six, 12, 24 months, and five years post-TSA for lateral humeral offset (LHO), joint gap (JG), acromiohumeral distance (AHD), and radiolucency (modified Franklin score); 147 patients were included. Mixed-model linear regression was used. Both constant score (CS) and subjective shoulder value (SSV) markedly decreased at five years follow-up compared to one year (p < 0.001 for both). AHD, LHO, and JG all showed a consistent and statistically significant decline over time, with the joint gap decreasing by half. Consistently, smaller JG and AHD were correlated with lower SSV (p = 0.03 and p = 0.07, respectively). Massive loosening was associated with a 14.5 points lower SSV (p < 0.01). Finally, narrowing of the JG was significantly correlated with increased radiolucency (p < 0.001) and tended toward worse SSV (p = 0.06). In summary, radiographic parameters displaying medialization and cranialization after aTSA with a cemented pegged glenoid are useful predictors of impaired shoulder function.

Sign in / Sign up

Export Citation Format

Share Document