scholarly journals Thermal Characterization of Innovative Sustainable Building Materials from Wool Textile Fibers Waste

2019 ◽  
Vol 63 (2-4) ◽  
pp. 277-283 ◽  
Author(s):  
C. Rubino ◽  
M. Bonet-Aracil ◽  
S. Liuzzi ◽  
F. Martellotta ◽  
P. Stefanizzi
Keyword(s):  
Building Materials ◽  
Thermal Characterization ◽  
Sustainable Building ◽  
Textile Fibers ◽  
Wool Textile ◽  
Sustainable Building Materials

Microstructural Characterization of Prefabricated Hempcrete Blocks

2022 ◽  
Author(s):  
Chiara Moletti ◽  
Valeria Arosio ◽  
Giovanni Dotelli
Keyword(s):  
Building Materials ◽  
Microstructural Characterization ◽  
Sustainable Building ◽  
Carbonation Reaction ◽  
Carbon Dioxide Uptake ◽  
Service Conditions ◽  
Polluting Emissions ◽  
Industrial Hemp ◽  
Sustainable Building Materials

Sustainable building materials have been developed to reduce the polluting emissions and the exploitation of natural resources of the building sector. Among these materials, an outstanding category is that of nature-based solutions which are produced recovering waste or by-products of agricultural cultivations and using them as vegetal aggregates to replace the traditional ones. This paper focusses on hempcrete which is produced mixing the by-product of industrial hemp cultivation (i.e., shives) and lime to obtain a sustainable, breathable and insulating material. The strength of hempcrete develops through carbonation of the binder that, leading to the formation of calcium or magnesium carbonates and mineralization of shives, determines the microstructure and hence most of the characteristic properties of the material. The aim of this research is to investigate how carbonation influences the microstructure of hempcrete when different recipes are used for blocks production. This study consists in the characterization of the material through techniques such as XRD (X-ray Diffractometry), SEM (Scanning Electron Microscopy) and TG-DTG (thermogravimetric analyses). Moreover, the evolution of carbonation is studied analyzing samples at different maturation times. The investigation of the carbonation reaction degree is also crucial to evaluate the environmental performances of the material because it allows the quantification of the carbon dioxide uptake. Also, periodic characterization allows to assess the durability of hempcrete and to select the best formulation according to the designed application and the corresponding service conditions.

scholarly journals Thermal Characterization of Recycled Materials for Building Insulation

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3564
Author(s):  
Arnas Majumder ◽  
Laura Canale ◽  
Costantino Carlo Mastino ◽  
Antonio Pacitto ◽  
Andrea Frattolillo ◽  
...  
Keyword(s):  
Environmental Impact ◽  
Environmental Sustainability ◽  
Building Materials ◽  
Raw Materials ◽  
Natural Fibers ◽  
Thermal Characterization ◽  
Recycled Materials ◽  
Building Insulation ◽  
Operational Phase

The building sector is known to have a significant environmental impact, considering that it is the largest contributor to global greenhouse gas emissions of around 36% and is also responsible for about 40% of global energy consumption. Of this, about 50% takes place during the building operational phase, while around 10–20% is consumed in materials manufacturing, transport and building construction, maintenance, and demolition. Increasing the necessity of reducing the environmental impact of buildings has led to enhancing not only the thermal performances of building materials, but also the environmental sustainability of their production chains and waste prevention. As a consequence, novel thermo-insulating building materials or products have been developed by using both locally produced natural and waste/recycled materials that are able to provide good thermal performances while also having a lower environmental impact. In this context, the aim of this work is to provide a detailed analysis for the thermal characterization of recycled materials for building insulation. To this end, the thermal behavior of different materials representing industrial residual or wastes collected or recycled using Sardinian zero-km locally available raw materials was investigated, namely: (1) plasters with recycled materials; (2) plasters with natural fibers; and (3) building insulation materials with natural fibers. Results indicate that the investigated materials were able to improve not only the energy performances but also the environmental comfort in both new and in existing buildings. In particular, plasters and mortars with recycled materials and with natural fibers showed, respectively, values of thermal conductivity (at 20 °C) lower than 0.475 and 0.272 W/(m⋅K), while that of building materials with natural fibers was always lower than 0.162 W/(m⋅K) with lower values for compounds with recycled materials (0.107 W/(m⋅K)). Further developments are underway to analyze the mechanical properties of these materials.

scholarly journals Magnesium Oxybromides MOB-318 and MOB-518: Brominated Analogues of Magnesium Oxychlorides

2020 ◽  
Vol 10 (11) ◽  
pp. 4032
Author(s):  
Anna-Marie Lauermannová ◽  
Michal Lojka ◽  
Filip Antončík ◽  
David Sedmidubský ◽  
Milena Pavlíková ◽  
...  
Keyword(s):  
Building Materials ◽  
Simultaneous Thermal Analysis ◽  
Heating Process ◽  
X Ray Diffraction ◽  
Sustainable Building ◽  
X Ray ◽  
Environmentally Sustainable ◽  
Transmission Electron ◽  
Magnesium Oxychloride ◽  
Sustainable Building Materials

The search for environmentally sustainable building materials is currently experiencing significant expansion. It is increasingly important to find new materials or reintroduce those that have been set aside to find a good replacement for Portland cement, which is widely used despite being environmentally insufficient and energy-intensive. Magnesium oxybromides, analogues to well-known magnesium oxychloride cements, fit both categories of new and reintroduced materials. In this contribution, two magnesium oxybromide phases were prepared and thoroughly analyzed. The stoichiometries of the prepared phases were 5Mg(OH)2∙MgBr2∙8H2O and 3Mg(OH)2∙MgBr2∙8H2O. The phase analysis was determined using X-ray diffraction. The morphology was analyzed with scanning and transmission electron microscopy. The chemical composition was studied using X-ray fluorescence and energy dispersive spectroscopy. Fourier transform infrared spectroscopy was also used. The thermal stability and the mechanism of the release of gasses linked to the heating process, such as water and hydrobromic acid evaporation, were analyzed using simultaneous thermal analysis combined with mass spectroscopy. The obtained results were compared with the data available for magnesium oxychlorides.

Sustainable Building Materials for Energy Efficiency

2018 ◽  
Author(s):  
Neeti Garg ◽  
Ashwani Kumar ◽  
Satish Pipralia ◽  
Parveen Kumar
Keyword(s):  
Energy Efficiency ◽  
Building Materials ◽  
Sustainable Building ◽  
Sustainable Building Materials

scholarly journals ‘Materials as a Design Tool’ Design Philosophy Applied in Three Innovative Research Pavilions Out of Sustainable Building Materials with Controlled End-Of-Life Scenarios

Buildings ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 64 ◽  
Author(s):  
Hanaa Dahy
Keyword(s):  
End Of Life ◽  
Case Studies ◽  
Design Process ◽  
Building Materials ◽  
Digital Fabrication ◽  
Life Cycles ◽  
Sustainable Building ◽  
Design Philosophy ◽  
Main Input ◽  
Sustainable Building Materials

Choosing building materials is usually the stage that follows design in the architectural design process, and is rarely used as a main input and driver for the design of the whole building’s geometries or structures. As an approach to have control over the environmental impact of the applied building materials and their after-use scenarios, an approach has been initiated by the author through a series of research studies, architectural built prototypes, and green material developments. This paper illustrates how sustainable building materials can be a main input in the design process, and how digital fabrication technologies can enable variable controlling strategies over the green materials’ properties, enabling adjustable innovative building spaces with new architectural typologies, aesthetic values, and controlled martial life cycles. Through this, a new type of design philosophy by means of applying sustainable building materials with closed life cycles is created. In this paper, three case studies of research pavilions are illustrated. The pavilions were prefabricated and constructed from newly developed sustainable building materials. The applied materials varied between structural and non-structural building materials, where each had a controlled end-of-life scenario. The application of the bio-based building materials was set as an initial design phase, and the architects here participated within two disciplines: once as designers, and additionally as green building material developers. In all three case studies, Design for Deconstruction (DfD) strategies were applied in different manners, encouraging architects to further follow such suggested approaches.

Sign in / Sign up

Export Citation Format

Share Document