scholarly journals Characterization of Different Parts of Oil Palm Fronds (Elaeis Guineensis) and Its Properties

Author(s):  
Noor Afeefah Nordin ◽  
Othman Sulaiman ◽  
Rokiah Hashim ◽  
Mohamad Haafiz Mohamad Kassim
2018 ◽  
Vol 17 (9) ◽  
pp. 427-433 ◽  
Author(s):  
Dewi Febrina ◽  
Rahmi Febriyanti ◽  
Syukria Ikhsan Zam ◽  
Jully Handoko ◽  
Abdul Fatah ◽  
...  

2019 ◽  
Vol 1 (1) ◽  
pp. 30-35
Author(s):  
Seri Maulina ◽  
Gewa Handika

This paper aims to understand the difference in characteristics of activated carbon produced from oil palm fronds (Elaeis guineensis Jacq) through the addition of two different activators, namely sodium carbonate (Na2CO3) and sodium chloride (NaCl). To do this, activator concentration of 10 percent each with activation temperature of 600 oC were applied in the experiment. Moreover, to determine the quality of activated carbon produced, a morphological analysis of activated carbon surfaces as well as FTIR spectra analysis on activated carbon. Identification using FTIR spectrophotometer revealed that the activated carbon in this study contained functional groups of O-H, C = O, C = C, C-C, and C-H.


2002 ◽  
Vol 51 (3) ◽  
pp. 207-211
Author(s):  
Masakazu YAMAOKA ◽  
Shiho HAYAKAWA ◽  
Marzuki AZAHARI ◽  
Idris ABU-SEMAN ◽  
Mhd. Haniff HARUN ◽  
...  

2019 ◽  
Vol 39 (10) ◽  
pp. 1696-1712 ◽  
Author(s):  
Pierre-André Waite ◽  
Bernhard Schuldt ◽  
Roman Mathias Link ◽  
Natalie Breidenbach ◽  
Triadiati Triadiati ◽  
...  

AbstractWith the prospect of climate change and more frequent El Niño-related dry spells, the drought tolerance of oil palm (Elaeis guineensis Jacq.), one of the most important tropical crop species, is of major concern. We studied the influence of soil water availability and palm height on the plasticity of xylem anatomy of oil palm fronds and their embolism resistance at well-drained and seasonally flooded riparian sites in lowland Sumatra, Indonesia. We found overall mean P12 and P50 values, i.e., the xylem pressures at 12% or 50% loss of hydraulic conductance, of −1.05 and − 1.86 MPa, respectively, indicating a rather vulnerable frond xylem of oil palm. This matches diurnal courses of stomatal conductance, which in combination with the observed low xylem safety evidence a sensitive water loss regulation. While the xylem anatomical traits vessel diameter (Dh), vessel density and potential hydraulic conductivity (Kp) were not different between the sites, palms in the moister riparian plots had on average by 0.4 MPa higher P50 values than plants in the well-drained plots. This could largely be attributed to differences in palm height between systems. As a consequence, palms of equal height had 1.3 MPa less negative P50 values in the moister riparian plots than in the well-drained plots. While palm height was positively related to P50, Dh and Kp decreased with height. The high plasticity in embolism resistance may be an element of the drought response strategy of oil palm, which, as a monocot, has a relatively deterministic hydraulic architecture. We conclude that oil palm fronds develop a vulnerable water transport system, which may expose the palms to increasing drought stress in a warmer and drier climate. However, the risk of hydraulic failure may be reduced by considerable plasticity in the hydraulic system and the environmental control of embolism resistance, and a presumably large stem capacitance.


2021 ◽  
Author(s):  
Razak Wahab ◽  
Mohd Sukhairi Mat Rasat ◽  
Norashikin Mohd Fauzi ◽  
Mohamad Saiful Sulaiman ◽  
Hashim W. Samsi ◽  
...  

Oil palm fronds are one of the biomass residues originating from oil palm plantations. It has great potential to be used as an alternative material for the composite boards industry to reduce dependency on wood-based raw materials. The fronds are obtainable all the year round and in big quantity. The oil palm fronds had been processed as compressed oil palm fronds to form such a potential composite board in this topic. A composite board from compressed oil palm fronds was produced by removing the fronds’ leaflets and epidermis. The sample was sliced longitudinally into thin layers and compressed into an identical thickness at about 2 to 3 mm. Pieces of the sample were dry using the air-dried method. They were then mixed with phenol and urea-formaldehyde of resins in the range of 12-15% and compressed again with another layer forming a composite board. Standard outlined by the International Organization for Standardization (ISO) tested for their physical and strength properties of composite board. Found that the physical and strength aspects’ properties show that the composite board possessed characteristics at par or equivalent. The composite board from compressed oil palm fronds has good prospects to be used as an alternative to wood. Thus, this characteristics can overcome the shortage in materials supply in the wood-based industry.


2016 ◽  
Vol 25 (3) ◽  
pp. 692-700 ◽  
Author(s):  
Rudi Dungani ◽  
Abdulwahab F. Owolabi ◽  
Chaturbhuj K. Saurabh ◽  
H. P. S. Abdul Khalil ◽  
Paridah M. Tahir ◽  
...  

2018 ◽  
Vol 225 ◽  
pp. 01008 ◽  
Author(s):  
Muddasser Inayat ◽  
Shaharin A. Sulaiman ◽  
Muhammad Yasin Naz

This study investigated the thermochemical characterization of oil palm fronds (OPF), coconut shells (CS) and wood for their use as a solid fuel for thermal conversion processes. The ultimate analysis, proximate analysis, calorific values, and elemental contents through energy dispersive X-ray spectroscopy of OPF, CS, and wood samples were measured. The results of OPF and CS were compared with wood considered as benchmark solid fuel. Proximate analysis was performed as per ASTM standard procedure in a muffle furnace and used thermos-gravimetric analysis technique. The ultimate analysis was used to determine the weight percentage of carbon, hydrogen, and nitrogen in CHNS analyzer. Elements analysis was done using energy dispersive X-ray spectroscopy. The ultimate analysis results show carbon content was higher in CS as compared to OPF and wood. The hydrogen content was higher in OPF. Proximate analysis results revealed that volatile matter was higher in wood, whereas fixed carbon and higher heating value were found higher in CS while ash content was lower in CS. From EDX results found that the OPF has Al, Si, Cl, and K, while, in wood and CS these elements are absent. The thermochemical characterization results of OPF and CS were comparable with the wood. Therefore, it concluded that OPF and CS have the potential to be used as renewable energy source by using appropriate energy conversion technologies, such as gasification, pyrolysis, and torrefaction.


Sign in / Sign up

Export Citation Format

Share Document